lkml.org 
[lkml]   [2002]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCHSET 1/17] support PC-9800 against 2.5.45-ac1 (boot)
This patch is for already merged files, to follow changes for
standard PC in -ac1.

diffstat:
arch/i386/boot98/Makefile | 2 +-
arch/i386/boot98/compressed/head.S | 8 ++++----
arch/i386/boot98/compressed/misc.c | 6 +++++-
arch/i386/boot98/setup.S | 29 ++++++++++++++++++++---------
4 files changed, 30 insertions(+), 15 deletions(-)diff -urN linux-2.5.45-ac1/arch/i386/boot98/Makefile linux98-2.5.45-ac1/arch/i386/boot98/Makefile
--- linux-2.5.45-ac1/arch/i386/boot98/Makefile Wed Nov 6 16:07:08 2002
+++ linux98-2.5.45-ac1/arch/i386/boot98/Makefile Thu Oct 31 09:42:28 2002
@@ -46,7 +46,7 @@
$(obj)/bzImage: EXTRA_AFLAGS := -traditional $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
$(obj)/bzImage: BUILDFLAGS := -b

-quiet_cmd_image = BUILD $(echo_target)
+quiet_cmd_image = BUILD $@
cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
$(obj)/vmlinux.bin $(ROOT_DEV) > $@

diff -urN linux-2.5.45-ac1/arch/i386/boot98/compressed/head.S linux98-2.5.45-ac1/arch/i386/boot98/compressed/head.S
--- linux-2.5.45-ac1/arch/i386/boot98/compressed/head.S Wed Nov 6 16:07:08 2002
+++ linux98-2.5.45-ac1/arch/i386/boot98/compressed/head.S Tue Nov 5 10:16:17 2002
@@ -31,7 +31,7 @@
startup_32:
cld
cli
- movl $(__KERNEL_DS),%eax
+ movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
@@ -74,7 +74,7 @@
popl %esi # discard address
popl %esi # real mode pointer
xorl %ebx,%ebx
- ljmp $(__KERNEL_CS), $0x100000
+ ljmp $(__BOOT_CS), $0x100000

/*
* We come here, if we were loaded high.
@@ -101,7 +101,7 @@
popl %eax # hcount
movl $0x100000,%edi
cli # make sure we don't get interrupted
- ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine
+ ljmp $(__BOOT_CS), $0x1000 # and jump to the move routine

/*
* Routine (template) for moving the decompressed kernel in place,
@@ -124,5 +124,5 @@
movsl
movl %ebx,%esi # Restore setup pointer
xorl %ebx,%ebx
- ljmp $(__KERNEL_CS), $0x100000
+ ljmp $(__BOOT_CS), $0x100000
move_routine_end:
diff -urN linux-2.5.45-ac1/arch/i386/boot98/compressed/misc.c linux98-2.5.45-ac1/arch/i386/boot98/compressed/misc.c
--- linux-2.5.45-ac1/arch/i386/boot98/compressed/misc.c Wed Nov 6 16:07:08 2002
+++ linux98-2.5.45-ac1/arch/i386/boot98/compressed/misc.c Wed Nov 6 15:10:28 2002
@@ -301,7 +301,7 @@
struct {
long * a;
short b;
- } stack_start = { & user_stack [STACK_SIZE] , __KERNEL_DS };
+ } stack_start = { & user_stack [STACK_SIZE] , __BOOT_DS };

static void setup_normal_output_buffer(void)
{
@@ -373,3 +373,7 @@
if (high_loaded) close_output_buffer_if_we_run_high(mv);
return high_loaded;
}
+
+/* We don't actually check for stack overflows this early. */
+__asm__(".globl mcount ; mcount: ret\n");
+
diff -urN linux-2.5.45-ac1/arch/i386/boot98/setup.S linux98-2.5.45-ac1/arch/i386/boot98/setup.S
--- linux-2.5.45-ac1/arch/i386/boot98/setup.S Wed Nov 6 16:07:08 2002
+++ linux98-2.5.45-ac1/arch/i386/boot98/setup.S Wed Nov 6 15:23:42 2002
@@ -660,7 +660,7 @@
subw $DELTA_INITSEG, %si
shll $4, %esi # Convert to 32-bit pointer
# NOTE: For high loaded big kernels we need a
-# jmpi 0x100000,__KERNEL_CS
+# jmpi 0x100000,__BOOT_CS
#
# but we yet haven't reloaded the CS register, so the default size
# of the target offset still is 16 bit.
@@ -671,7 +671,7 @@
.byte 0x66, 0xea # prefix + jmpi-opcode
code32: .long 0x1000 # will be set to 0x100000
# for big kernels
- .word __KERNEL_CS
+ .word __BOOT_CS

# Here's a bunch of information about your current kernel..
kernel_version: .ascii UTS_RELEASE
@@ -902,13 +902,19 @@

# Descriptor tables
#
-# NOTE: if you think the GDT is large, you can make it smaller by just
-# defining the KERNEL_CS and KERNEL_DS entries and shifting the gdt
-# address down by GDT_ENTRY_KERNEL_CS*8. This puts bogus entries into
-# the GDT, but those wont be used so it's not a problem.
+# NOTE: The intel manual says gdt should be sixteen bytes aligned for
+# efficiency reasons. However, there are machines which are known not
+# to boot with misaligned GDTs, so alter this at your peril! If you alter
+# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two
+# empty GDT entries (one for NULL and one reserved).
#
+# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is
+# true for the Voyager Quad CPU card which will not boot without
+# This directive. 16 byte aligment is recommended by intel.
+#
+ .align 16
gdt:
- .fill GDT_ENTRY_KERNEL_CS,8,0
+ .fill GDT_ENTRY_BOOT_CS,8,0

.word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
.word 0 # base address = 0
@@ -921,12 +927,17 @@
.word 0x9200 # data read/write
.word 0x00CF # granularity = 4096, 386
# (+5th nibble of limit)
+gdt_end:
+ .align 4
+
+ .word 0 # alignment byte
idt_48:
.word 0 # idt limit = 0
.word 0, 0 # idt base = 0L
-gdt_48:
- .word GDT_ENTRY_KERNEL_CS*8 + 16 - 1 # gdt limit

+ .word 0 # alignment byte
+gdt_48:
+ .word gdt_end - gdt - 1 # gdt limit
.word 0, 0 # gdt base (filled in later)

# Include video setup & detection code
\
 
 \ /
  Last update: 2005-03-22 13:30    [W:0.175 / U:0.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site