lkml.org 
[lkml]   [2002]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject2.5.46: SCSI and/or ReiserFS v3.6 broken? Kernel panic
    Date
    VFS: Cannot open root device "803" or 08:03
    Please append a correct "root=" boot option
    Kernel panic: VFS: unable to mount root fs on 08:03

    With and without HugeTLB file system support.
    With and without ACPI, APIC.

    Worked all the time before.

    dual Athlon MP 1900+
    MSI K7D Master-L (aka Ms-6501) Rev 1.0, AMD 768MPX

    How it looks with 2.4.19 + patches:

    <4>Linux version 2.4.19-ck5-pc (root@SunWave1) (gcc version 2.95.3 20010315
    (SuSE)) #1 SMP
    Sam Sep 7 04:20:05 CEST 2002
    <6>BIOS-provided physical RAM map:
    <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    <4> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    <4> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    <4> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    <4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    <5>127MB HIGHMEM available.
    <5>896MB LOWMEM available.
    <7>ACPI: have wakeup address 0xc0002000
    <4>found SMP MP-table at 000f4af0
    <4>hm, page 000f4000 reserved twice.
    <4>hm, page 000f5000 reserved twice.
    <4>hm, page 000f1000 reserved twice.
    <4>hm, page 000f2000 reserved twice.
    <6>Advanced speculative caching feature present
    <4>On node 0 totalpages: 262128
    <4>zone(0): 4096 pages.
    <4>zone(1): 225280 pages.
    <4>zone(2): 32752 pages.
    <6>ACPI: RSDP (v000 AMD2P ) @ 0x000f6400
    <6>ACPI: RSDT (v001 AMD2P AWRDACPI 16944.11825) @ 0x3fff3000
    <6>ACPI: FADT (v001 AMD2P AWRDACPI 16944.11825) @ 0x3fff3040
    <6>ACPI: MADT (v001 AMD2P AWRDACPI 16944.11825) @ 0x3fff6480
    <6>ACPI: Local APIC address 0xfee00000
    <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    <4>Processor #0 Pentium(tm) Pro APIC version 16
    <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    <4>Processor #1 Pentium(tm) Pro APIC version 16
    <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
    <6>IOAPIC[0]: Assigned apic_id 2
    <4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
    <6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0]
    trigger[0x0])
    <6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3]
    trigger[0x3])
    <6>Using ACPI (MADT) for SMP configuration information
    <4>Kernel command line: auto BOOT_IMAGE=linux.old ro root=803
    BOOT_FILE=/boot/vmlinuz.old r
    eboot=warm video=radeonfb:1280x1024-8@75
    <6>Initializing CPU#0
    <4>Detected 1600.096 MHz processor.
    <4>Console: colour VGA+ 80x25
    <4>Calibrating delay loop... 3191.60 BogoMIPS
    <6>Memory: 1032628k/1048512k available (1350k kernel code, 15496k reserved,
    499k data, 100k init, 131008k highmem)

    [-]

    <6>SCSI subsystem driver Revision: 1.00
    <6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
    <4> <Adaptec 29160B Ultra160 SCSI adapter>
    <4> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
    <4>
    <6>scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
    <4> <Adaptec 2940 Ultra SCSI adapter>
    <4> aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
    <4>
    <4> Vendor: IBM Model: DDYS-T18350N Rev: S96H
    <4> Type: Direct-Access ANSI SCSI revision: 03
    <4>scsi0:A:0:0: Tagged Queuing enabled. Depth 253
    <4> Vendor: IBM Model: DDRS-34560D Rev: DC1B
    <4> Type: Direct-Access ANSI SCSI revision: 02
    <4> Vendor: IBM Model: DDRS-34560W Rev: S71D
    <4> Type: Direct-Access ANSI SCSI revision: 02
    <4> Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1010
    <4> Type: CD-ROM ANSI SCSI revision: 02
    <4> Vendor: TEAC Model: CD-W512SB Rev: 1.0H
    <4> Type: CD-ROM ANSI SCSI revision: 02
    <4>scsi1:A:1:0: Tagged Queuing enabled. Depth 253
    <4>scsi1:A:2:0: Tagged Queuing enabled. Depth 253
    <4>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    <4>Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
    <4>Attached scsi disk sdc at scsi1, channel 0, id 2, lun 0
    <4>(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
    <4>SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
    <6>Partition check:
    <6> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
    <4>(scsi1:A:1): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
    <4>SCSI device sdb: 8925000 512-byte hdwr sectors (4570 MB)
    <6> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
    <4>(scsi1:A:2): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
    <4>SCSI device sdc: 8925000 512-byte hdwr sectors (4570 MB)
    <6> sdc: sdc1

    [-]

    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs: checking transaction log (sd(8,3)) for (sd(8,3))
    <4>Using r5 hash to sort names
    <4>VFS: Mounted root (reiserfs filesystem) readonly.
    <6>Freeing unused kernel memory: 100k freed
    <6>Adding Swap: 1028120k swap-space (priority -1)
    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs: checking transaction log (sd(8,2)) for (sd(8,2))
    <4>Using r5 hash to sort names
    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs: checking transaction log (sd(8,5)) for (sd(8,5))
    <4>Using r5 hash to sort names
    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs: checking transaction log (sd(8,6)) for (sd(8,6))
    <4>Using r5 hash to sort names
    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs: checking transaction log (sd(8,7)) for (sd(8,7))
    <4>Using r5 hash to sort names
    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs: checking transaction log (sd(8,8)) for (sd(8,8))
    <4>Using r5 hash to sort names
    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs warning: wrong transaction max size (8192). Changed to 1024
    <4>reiserfs: checking transaction log (sd(8,17)) for (sd(8,17))
    <4>Using r5 hash to sort names
    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs: checking transaction log (sd(8,21)) for (sd(8,21))
    <4>Using r5 hash to sort names
    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs: checking transaction log (sd(8,22)) for (sd(8,22))
    <4>Using r5 hash to sort names
    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs: checking transaction log (sd(8,23)) for (sd(8,23))
    <4>Using r5 hash to sort names
    <4>reiserfs: found format "3.6" with standard journal
    <4>reiserfs: checking transaction log (sd(8,24)) for (sd(8,24))
    <4>Using r5 hash to sort names

    Thanks,
    Dieter
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:30    [W:0.053 / U:29.968 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site