Messages in this thread | | | Subject | Re: Linux Kernel on NCR Worldmark 5100 and 3450 Workstation | Date | Tue, 26 Nov 2002 10:32:32 -0600 | From | James Bottomley <> |
| |
> Does anyone know anything about getting a Linux kernel to boot on > either of these machines? The Worldmark 5100 is a massive > multiprocessor Pentium Pro machine with two MCA buses. The 3450 is a > quad-Pentium workstation with a single MCA bus.
The WorldMark was the new name for the voyager systems (I even forgot that they changed it). A (somewhat contorted) boot process is documented here.
The 3450 should work flawlessly as long as it has either a buslogic or D700 SCSI controller (I use a relative of this, the 3455 for my SCSI development work).
The 5100 should work, but you'll have trouble with the Q720 SCSI controller. The patches I had to make this card work with the 53c7,8xx driver are defunct in 2.5 (although they may work for 2.4). I had planned to try to leverage Richard Hirst's parisc Zalon SCSI work to do this and trick the consistent memory allocation routines to use the 2Mb memory window behind the MCA bridge, but I haven't even begun that yet.
I'm just starting to look at support for the secondary microchannel in the 5100---If you follow the mca-sysfs thread on linux-kernel, you'll see all the necessary abstractions. Unfortunately, I don't actually have a machine with two MCA busses, only the specs, so I'm flying by simulator only.
The project and its patches are all available here:
http://www.hansenpartnership.com/voyager
James Bottomley
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |