lkml.org 
[lkml]   [2002]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Fix S3 resume when kernel is big
Hi!

> > - acpi_create_identity_pmd();
> > + if (!cpu_has_pse) {
> > + printk(KERN_ERR "You have S3 capable machine without pse? Wow!");
> > + return 1;
> > + }
>
> Mobile K6 family never had PSE iirc, and also VIA Cyrix 3's are being
> dropped into various laptops.

Okay, here is patch that should be ableto handle machines without
pse... I'd still like to see machine where ACPI S3 work and it does
not have pse, through.

Pavel

--- clean/arch/i386/kernel/acpi.c 2002-09-22 23:46:52.000000000 +0200
+++ linux-swsusp/arch/i386/kernel/acpi.c 2002-11-24 20:29:33.000000000 +0100
@@ -446,72 +446,19 @@

#ifdef CONFIG_ACPI_SLEEP

-#define DEBUG
-
-#ifdef DEBUG
-#include <linux/serial.h>
-#endif
-
/* address in low memory of the wakeup routine. */
unsigned long acpi_wakeup_address = 0;

-/* new page directory that we will be using */
-static pmd_t *pmd;
-
-/* saved page directory */
-static pmd_t saved_pmd;
-
-/* page which we'll use for the new page directory */
-static pte_t *ptep;
-
extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long));

-/*
- * acpi_create_identity_pmd
- *
- * Create a new, identity mapped pmd.
- *
- * Do this by creating new page directory, and marking all the pages as R/W
- * Then set it as the new Page Middle Directory.
- * And, of course, flush the TLB so it takes effect.
- *
- * We save the address of the old one, for later restoration.
- */
-static void acpi_create_identity_pmd (void)
+static void init_low_mapping(pgd_t *pgd, int pgd_ofs, int pgd_limit)
{
- pgd_t *pgd;
- int i;
-
- ptep = (pte_t*)__get_free_page(GFP_KERNEL);
+ int pgd_ofs = 0;

- /* fill page with low mapping */
- for (i = 0; i < PTRS_PER_PTE; i++)
- set_pte(ptep + i, pfn_pte(i, PAGE_SHARED));
-
- pgd = pgd_offset(current->active_mm, 0);
- pmd = pmd_alloc(current->mm,pgd, 0);
-
- /* save the old pmd */
- saved_pmd = *pmd;
-
- /* set the new one */
- set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(ptep)));
-
- /* flush the TLB */
- local_flush_tlb();
-}
-
-/*
- * acpi_restore_pmd
- *
- * Restore the old pmd saved by acpi_create_identity_pmd and
- * free the page that said function alloc'd
- */
-static void acpi_restore_pmd (void)
-{
- set_pmd(pmd, saved_pmd);
- local_flush_tlb();
- free_page((unsigned long)ptep);
+ while ((pgd_ofs < pgd_limit) && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) {
+ set_pgd(pgd, *(pgd+USER_PTRS_PER_PGD));
+ pgd_ofs++, pgd++;
+ }
}

/**
@@ -522,7 +469,11 @@
*/
int acpi_save_state_mem (void)
{
- acpi_create_identity_pmd();
+#if CONFIG_X86_PAE
+ panic("S3 and PAE do not like each other for now.");
+ return 1;
+#endif
+ init_low_mapping(swapper_pg_dir, 0, USER_PTRS_PER_PGD);
acpi_copy_wakeup_routine(acpi_wakeup_address);

return 0;
@@ -542,7 +493,7 @@
*/
void acpi_restore_state_mem (void)
{
- acpi_restore_pmd();
+ zap_low_mappings();
}

/**
@@ -555,7 +506,10 @@
*/
void __init acpi_reserve_bootmem(void)
{
+ extern char wakeup_start, wakeup_end;
acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE);
+ if ((&wakeup_end - &wakeup_start) > PAGE_SIZE)
+ printk(KERN_CRIT "ACPI: Wakeup code way too big, will crash on attempt to suspend\n");
printk(KERN_DEBUG "ACPI: have wakeup address 0x%8.8lx\n", acpi_wakeup_address);
}

--- clean/arch/i386/kernel/acpi_wakeup.S 2002-11-19 16:45:58.000000000 +0100
+++ linux-swsusp/arch/i386/kernel/acpi_wakeup.S 2002-11-23 20:44:44.000000000 +0100
@@ -1,12 +1,17 @@
-
.text
#include <linux/linkage.h>
#include <asm/segment.h>
+#include <asm/page.h>

-# Do we need to deal with A20?
+#
+# wakeup_code runs in real mode, and at unknown address (determined at run-time).
+# Therefore it must only use relative jumps/calls.
+#
+# Do we need to deal with A20? It seems okay

ALIGN
-wakeup_start:
+ .align 4096
+ENTRY(wakeup_start)
wakeup_code:
wakeup_code_start = .
.code16
@@ -14,49 +19,71 @@
movw $0xb800, %ax
movw %ax,%fs
movw $0x0e00 + 'L', %fs:(0x10)
+
cli
cld
-
- # setup data segment
- movw %cs, %ax

- addw $(wakeup_data - wakeup_code) >> 4, %ax
- movw %ax, %ds
- movw %ax, %ss
- mov $(wakeup_stack - wakeup_data), %sp # Private stack is needed for ASUS board
+# We are now probably running at something like 0x0000 : 0x1000
+ call here
+here:
+ pop %bx
+ subw $(here-wakeup_start), %bx
+ shrw $4, %bx
+
+ # setup data segment
+ movw %cs, %ax
+ addw %bx, %ax
+ movw %ax, %ds # Make ds:0 point to wakeup_start
+ movw %ax, %ss
+ mov $(wakeup_stack-wakeup_code), %sp # Private stack is needed for ASUS board
movw $0x0e00 + 'S', %fs:(0x12)

- movl real_magic - wakeup_data, %eax
+ pushl $0 # Kill any dangerous flags
+ popfl
+ cli
+ cld
+
+ movl real_magic-wakeup_code, %eax
cmpl $0x12345678, %eax
jne bogus_real_magic

- mov video_mode - wakeup_data, %ax
+ mov video_mode-wakeup_code, %ax
call mode_set

# set up page table
- movl (real_save_cr3 - wakeup_data), %eax
+ movl $swapper_pg_dir-__PAGE_OFFSET,%eax
movl %eax, %cr3

# make sure %cr4 is set correctly (features, etc)
- movl (real_save_cr4 - wakeup_data), %eax
+ movl real_save_cr4-wakeup_code, %eax
movl %eax, %cr4
movw $0xb800, %ax
movw %ax,%fs
movw $0x0e00 + 'i', %fs:(0x12)
-
+
# need a gdt
- lgdt real_save_gdt - wakeup_data
+ lgdt real_save_gdt-wakeup_code

- movl (real_save_cr0 - wakeup_data), %eax
+ movl real_save_cr0-wakeup_code, %eax
movl %eax, %cr0
+ jmp 1f
+1:
movw $0x0e00 + 'n', %fs:(0x14)

- movl real_magic - wakeup_data, %eax
+ movl real_magic-wakeup_code, %eax
cmpl $0x12345678, %eax
jne bogus_real_magic

ljmpl $__KERNEL_CS,$wakeup_pmode_return

+real_save_gdt: .word 0
+ .long 0
+real_save_cr0: .long 0
+real_save_cr3: .long 0
+real_save_cr4: .long 0
+real_magic: .long 0
+video_mode: .long 0
+
bogus_real_magic:
movw $0x0e00 + 'B', %fs:(0x12)
jmp bogus_real_magic
@@ -129,20 +156,12 @@
.code32
ALIGN

-.org 0x300
-wakeup_data:
- .word 0
-real_save_gdt: .word 0
- .long 0
-real_save_cr0: .long 0
-real_save_cr3: .long 0
-real_save_cr4: .long 0
-real_magic: .long 0
-video_mode: .long 0

-.org 0x500
+.org 0x2000
wakeup_stack:
-wakeup_end:
+.org 0x3000
+ENTRY(wakeup_end)
+.org 0x4000

wakeup_pmode_return:
movl $__KERNEL_DS, %eax
@@ -205,6 +224,9 @@
movw $0x0e00 + '2', %ds:(0xb8018)
jmp bogus_magic2

+.org 0x123456
+eat_some_memory:
+ .long 0

##
# acpi_copy_wakeup_routine
@@ -228,7 +250,7 @@

movl %eax, %edi
leal wakeup_start, %esi
- movl $(wakeup_end - wakeup_start) >> 2, %ecx
+ movl $(wakeup_end - wakeup_start + 3) >> 2, %ecx

rep ; movsl

@@ -290,8 +312,8 @@
ret
.p2align 4,,7
.L1432:
- movl $104,%eax
- movw %eax, %ds
+ movl $__KERNEL_DS,%eax
+ movw %ax, %ds
movl saved_context_esp, %esp
movl saved_context_ebp, %ebp
movl saved_context_eax, %eax
@@ -310,5 +332,4 @@
saved_idt: .long 0,0
saved_ldt: .long 0
saved_tss: .long 0
-saved_cr0: .long 0

--- clean/arch/i386/mm/init.c 2002-11-19 16:45:26.000000000 +0100
+++ linux-swsusp/arch/i386/mm/init.c 2002-11-24 20:18:22.000000000 +0100
@@ -299,7 +299,7 @@
#endif
}

-void __init zap_low_mappings (void)
+void zap_low_mappings (void)
{
int i;
/*

--
Worst form of spam? Adding advertisment signatures ala sourceforge.net.
What goes next? Inserting advertisment *into* email?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:31    [W:0.061 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site