lkml.org 
[lkml]   [2002]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] sysfs stuff for eisa bus [2/3]
From
Date
Second patch is 3c509 driver ported to the sysfs EISA infrastructure :
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.803 -> 1.804
# drivers/net/3c509.c 1.25 -> 1.26
# drivers/net/Space.c 1.13 -> 1.14
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 02/11/10 maz@hina.wild-wind.fr.eu.org 1.804
# Ported to sysfs EISA framework.
# Added new style init/cleanup.
# --------------------------------------------
#
diff -Nru a/drivers/net/3c509.c b/drivers/net/3c509.c
--- a/drivers/net/3c509.c Sun Nov 10 22:49:20 2002
+++ b/drivers/net/3c509.c Sun Nov 10 22:49:20 2002
@@ -53,11 +53,13 @@
- Additional ethtool features
v1.19a 28Oct2002 Davud Ruggiero <jdr@farfalle.com>
- Increase *read_eeprom udelay to workaround oops with 2 cards.
+ v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org>
+ - Introduce driver model for EISA cards.
*/

#define DRV_NAME "3c509"
-#define DRV_VERSION "1.19a"
-#define DRV_RELDATE "28Oct2002"
+#define DRV_VERSION "1.19b"
+#define DRV_RELDATE "08Nov2002"

/* A few values that may be tweaked. */

@@ -85,6 +87,8 @@
#include <linux/delay.h> /* for udelay() */
#include <linux/spinlock.h>
#include <linux/ethtool.h>
+#include <linux/device.h>
+#include <linux/eisa.h>

#include <asm/uaccess.h>
#include <asm/bitops.h>
@@ -169,6 +173,9 @@
#ifdef CONFIG_PM
struct pm_dev *pmdev;
#endif
+#ifdef CONFIG_EISA
+ struct eisa_device *edev;
+#endif
};
static int id_port __initdata = 0x110; /* Start with 0x110 to avoid new sound cards.*/
static struct net_device *el3_root_dev;
@@ -193,6 +200,26 @@
static int el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data);
#endif

+#ifdef CONFIG_EISA
+struct eisa_device_id el3_eisa_ids[] = {
+ { "TCM5092" },
+ { "TCM5093" },
+ { "" }
+};
+
+static int el3_eisa_probe (struct device *device);
+static int el3_eisa_remove (struct device *device);
+
+struct eisa_driver el3_eisa_driver = {
+ .id_table = el3_eisa_ids,
+ .driver = {
+ .name = "3c509",
+ .probe = el3_eisa_probe,
+ .remove = __devexit_p (el3_eisa_remove)
+ }
+};
+#endif
+
#ifdef CONFIG_MCA
struct el3_mca_adapters_struct {
char* name;
@@ -239,55 +266,102 @@
#endif /* __ISAPNP__ */
static int nopnp;

-int __init el3_probe(struct net_device *dev, int card_idx)
+/* With the driver model introduction for EISA devices, both init
+ * and cleanup have been split :
+ * - EISA devices probe/remove starts in el3_eisa_probe/el3_eisa_remove
+ * - MCA/ISA still use el3_probe
+ *
+ * Both call el3_common_init/el3_common_remove. */
+
+static int __init el3_common_init (struct net_device *dev)
{
- struct el3_private *lp;
- short lrs_state = 0xff, i;
- int ioaddr, irq, if_port;
- u16 phys_addr[3];
- static int current_tag;
- int mca_slot = -1;
-#ifdef __ISAPNP__
- static int pnp_cards;
-#endif /* __ISAPNP__ */
+ struct el3_private *lp = dev->priv;
+ short i;
+
+#ifdef CONFIG_EISA
+ if (!lp->edev) /* EISA devices are not chained */
+#endif
+ {
+ lp->next_dev = el3_root_dev;
+ el3_root_dev = dev;
+ }
+ spin_lock_init(&lp->lock);

- if (dev) SET_MODULE_OWNER(dev);
+ if (dev->mem_start & 0x05) { /* xcvr codes 1/3/4/12 */
+ dev->if_port = (dev->mem_start & 0x0f);
+ } else { /* xcvr codes 0/8 */
+ /* use eeprom value, but save user's full-duplex selection */
+ dev->if_port |= (dev->mem_start & 0x08);
+ }

- /* First check all slots of the EISA bus. The next slot address to
- probe is kept in 'eisa_addr' to support multiple probe() calls. */
- if (EISA_bus) {
- static int eisa_addr = 0x1000;
- while (eisa_addr < 0x9000) {
- int device_id;
+ {
+ const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"};
+ printk("%s: 3c5x9 at %#3.3lx, %s port, address ",
+ dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)]);
+ }

- ioaddr = eisa_addr;
- eisa_addr += 0x1000;
+ /* Read in the station address. */
+ for (i = 0; i < 6; i++)
+ printk(" %2.2x", dev->dev_addr[i]);
+ printk(", IRQ %d.\n", dev->irq);

- /* Check the standard EISA ID register for an encoded '3Com'. */
- if (inw(ioaddr + 0xC80) != 0x6d50)
- continue;
+ if (el3_debug > 0)
+ printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB);

- /* Avoid conflict with 3c590, 3c592, 3c597, etc */
- device_id = (inb(ioaddr + 0xC82)<<8) + inb(ioaddr + 0xC83);
- if ((device_id & 0xFF00) == 0x5900) {
- continue;
- }
+ /* The EL3-specific entries in the device structure. */
+ dev->open = &el3_open;
+ dev->hard_start_xmit = &el3_start_xmit;
+ dev->stop = &el3_close;
+ dev->get_stats = &el3_get_stats;
+ dev->set_multicast_list = &set_multicast_list;
+ dev->tx_timeout = el3_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->do_ioctl = netdev_ioctl;

- /* Change the register set to the configuration window 0. */
- outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD);
+#ifdef CONFIG_PM
+ /* register power management */
+ lp->pmdev = pm_register(PM_ISA_DEV, card_idx, el3_pm_callback);
+ if (lp->pmdev) {
+ struct pm_dev *p;
+ p = lp->pmdev;
+ p->data = (struct net_device *)dev;
+ }
+#endif

- irq = inw(ioaddr + WN0_IRQ) >> 12;
- if_port = inw(ioaddr + 6)>>14;
- for (i = 0; i < 3; i++)
- phys_addr[i] = htons(read_eeprom(ioaddr, i));
+ return 0;
+}

- /* Restore the "Product ID" to the EEPROM read register. */
- read_eeprom(ioaddr, 3);
+static void el3_common_remove (struct net_device *dev)
+{
+ struct el3_private *lp = dev->priv;

- /* Was the EISA code an add-on hack? Nahhhhh... */
- goto found;
- }
- }
+ (void) lp; /* Keep gcc quiet... */
+#ifdef CONFIG_MCA
+ if(lp->mca_slot!=-1)
+ mca_mark_as_unused(lp->mca_slot);
+#endif
+#ifdef CONFIG_PM
+ if (lp->pmdev)
+ pm_unregister(lp->pmdev);
+#endif
+
+ unregister_netdev (dev);
+ release_region(dev->base_addr, EL3_IO_EXTENT);
+ kfree (dev);
+}
+
+static int __init el3_probe(int card_idx)
+{
+ struct net_device *dev;
+ struct el3_private *lp;
+ short lrs_state = 0xff, i;
+ int ioaddr, irq, if_port;
+ u16 phys_addr[3];
+ static int current_tag;
+ int mca_slot = -1;
+#ifdef __ISAPNP__
+ static int pnp_cards;
+#endif /* __ISAPNP__ */

#ifdef CONFIG_MCA
/* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, heavily
@@ -464,6 +538,8 @@
}
irq = id_read_eeprom(9) >> 12;

+#if 0 /* Huh ?
+ Can someone explain what is this for ? */
if (dev) { /* Set passed-in IRQ or I/O Addr. */
if (dev->irq > 1 && dev->irq < 16)
irq = dev->irq;
@@ -476,6 +552,7 @@
return -ENODEV;
}
}
+#endif

if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509"))
return -EBUSY;
@@ -495,76 +572,83 @@
/* Free the interrupt so that some other card can use it. */
outw(0x0f00, ioaddr + WN0_IRQ);
found:
+ dev = init_etherdev(NULL, sizeof(struct el3_private));
if (dev == NULL) {
- dev = init_etherdev(dev, sizeof(struct el3_private));
- if (dev == NULL) {
- release_region(ioaddr, EL3_IO_EXTENT);
- return -ENOMEM;
- }
- SET_MODULE_OWNER(dev);
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
}
+ SET_MODULE_OWNER(dev);
+
memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
dev->base_addr = ioaddr;
dev->irq = irq;
+ dev->if_port = if_port;
+ lp = dev->priv;
+ lp->mca_slot = mca_slot;

- if (dev->mem_start & 0x05) { /* xcvr codes 1/3/4/12 */
- dev->if_port = (dev->mem_start & 0x0f);
- } else { /* xcvr codes 0/8 */
- /* use eeprom value, but save user's full-duplex selection */
- dev->if_port = (if_port | (dev->mem_start & 0x08) );
- }
+ return el3_common_init (dev);
+}

- {
- const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"};
- printk("%s: 3c5x9 at %#3.3lx, %s port, address ",
- dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)]);
+#ifdef CONFIG_EISA
+static int __init el3_eisa_probe (struct device *device)
+{
+ struct el3_private *lp;
+ short i;
+ int ioaddr, irq, if_port;
+ u16 phys_addr[3];
+ struct net_device *dev = NULL;
+ struct eisa_device *edev;
+
+ /* Yeepee, The driver framework is calling us ! */
+ edev = to_eisa_device (device);
+ ioaddr = edev->base_addr;
+
+ if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509"))
+ return -EBUSY;
+
+ /* Change the register set to the configuration window 0. */
+ outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD);
+
+ irq = inw(ioaddr + WN0_IRQ) >> 12;
+ if_port = inw(ioaddr + 6)>>14;
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
+
+ /* Restore the "Product ID" to the EEPROM read register. */
+ read_eeprom(ioaddr, 3);
+
+ dev = init_etherdev(NULL, sizeof(struct el3_private));
+ if (dev == NULL) {
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
}

- /* Read in the station address. */
- for (i = 0; i < 6; i++)
- printk(" %2.2x", dev->dev_addr[i]);
- printk(", IRQ %d.\n", dev->irq);
+ SET_MODULE_OWNER(dev);

- /* Make up a EL3-specific-data structure. */
- if (dev->priv == NULL)
- dev->priv = kmalloc(sizeof(struct el3_private), GFP_KERNEL);
- if (dev->priv == NULL)
- return -ENOMEM;
- memset(dev->priv, 0, sizeof(struct el3_private));
-
+ memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+ dev->if_port = if_port;
lp = dev->priv;
- lp->mca_slot = mca_slot;
- lp->next_dev = el3_root_dev;
- spin_lock_init(&lp->lock);
- el3_root_dev = dev;
+ lp->mca_slot = -1;
+ lp->edev = edev;
+ edev->driver_data = dev;

- if (el3_debug > 0)
- printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB);
+ return el3_common_init (dev);
+}

- /* The EL3-specific entries in the device structure. */
- dev->open = &el3_open;
- dev->hard_start_xmit = &el3_start_xmit;
- dev->stop = &el3_close;
- dev->get_stats = &el3_get_stats;
- dev->set_multicast_list = &set_multicast_list;
- dev->tx_timeout = el3_tx_timeout;
- dev->watchdog_timeo = TX_TIMEOUT;
- dev->do_ioctl = netdev_ioctl;
+static int __devexit el3_eisa_remove (struct device *device)
+{
+ struct eisa_device *edev;
+ struct net_device *dev;

-#ifdef CONFIG_PM
- /* register power management */
- lp->pmdev = pm_register(PM_ISA_DEV, card_idx, el3_pm_callback);
- if (lp->pmdev) {
- struct pm_dev *p;
- p = lp->pmdev;
- p->data = (struct net_device *)dev;
- }
-#endif
+ edev = to_eisa_device (device);
+ dev = edev->driver_data;

- /* Fill in the generic fields of the device structure. */
- ether_setup(dev);
- return 0;
+ el3_common_remove (dev);
+ return 0;
}
+#endif

/* Read a word from the EEPROM using the regular EEPROM access register.
Assume that we are in register window zero.
@@ -974,7 +1058,8 @@
el3_close(struct net_device *dev)
{
int ioaddr = dev->base_addr;
-
+ struct el3_private *lp = (struct el3_private *)dev->priv;
+
if (el3_debug > 2)
printk("%s: Shutting down ethercard.\n", dev->name);

@@ -983,8 +1068,12 @@
free_irq(dev->irq, dev);
/* Switching back to window 0 disables the IRQ. */
EL3WINDOW(0);
- /* But we explicitly zero the IRQ line select anyway. */
- outw(0x0f00, ioaddr + WN0_IRQ);
+ if (!lp->edev) {
+ /* But we explicitly zero the IRQ line select anyway. Don't do
+ * it on EISA cards, it prevents the module from getting an
+ * IRQ after unload+reload... */
+ outw(0x0f00, ioaddr + WN0_IRQ);
+ }

return 0;
}
@@ -1406,7 +1495,6 @@

#endif /* CONFIG_PM */

-#ifdef MODULE
/* Parameters that may be passed into the module. */
static int debug = -1;
static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
@@ -1428,8 +1516,7 @@
MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B) ISA/PnP ethernet driver");
MODULE_LICENSE("GPL");

-int
-init_module(void)
+static int __init el3_init_module(void)
{
int el3_cards = 0;

@@ -1437,7 +1524,7 @@
el3_debug = debug;

el3_root_dev = NULL;
- while (el3_probe(0, el3_cards) == 0) {
+ while (el3_probe(el3_cards) == 0) {
if (irq[el3_cards] > 1)
el3_root_dev->irq = irq[el3_cards];
if (xcvr[el3_cards] >= 0)
@@ -1445,34 +1532,36 @@
el3_cards++;
}

+#ifdef CONFIG_EISA
+ if (eisa_driver_register (&el3_eisa_driver) < 0) {
+ eisa_driver_unregister (&el3_eisa_driver);
+ }
+ else
+ el3_cards++; /* Found an eisa card */
+#endif
return el3_cards ? 0 : -ENODEV;
}

-void
-cleanup_module(void)
+static void __exit el3_cleanup_module(void)
{
struct net_device *next_dev;

/* No need to check MOD_IN_USE, as sys_delete_module() checks. */
while (el3_root_dev) {
struct el3_private *lp = (struct el3_private *)el3_root_dev->priv;
-#ifdef CONFIG_MCA
- if(lp->mca_slot!=-1)
- mca_mark_as_unused(lp->mca_slot);
-#endif

-#ifdef CONFIG_PM
- if (lp->pmdev)
- pm_unregister(lp->pmdev);
-#endif
next_dev = lp->next_dev;
- unregister_netdev(el3_root_dev);
- release_region(el3_root_dev->base_addr, EL3_IO_EXTENT);
- kfree(el3_root_dev);
+ el3_common_remove (el3_root_dev);
el3_root_dev = next_dev;
}
+
+#ifdef CONFIG_EISA
+ eisa_driver_unregister (&el3_eisa_driver);
+#endif
}
-#endif /* MODULE */
+
+module_init (el3_init_module);
+module_exit (el3_cleanup_module);

/*
* Local variables:
diff -Nru a/drivers/net/Space.c b/drivers/net/Space.c
--- a/drivers/net/Space.c Sun Nov 10 22:49:20 2002
+++ b/drivers/net/Space.c Sun Nov 10 22:49:20 2002
@@ -56,7 +56,6 @@
extern int hp_plus_probe(struct net_device *dev);
extern int express_probe(struct net_device *);
extern int eepro_probe(struct net_device *);
-extern int el3_probe(struct net_device *);
extern int at1500_probe(struct net_device *);
extern int at1700_probe(struct net_device *);
extern int fmv18x_probe(struct net_device *);
@@ -215,9 +214,6 @@
* look for EISA/PCI/MCA cards in addition to ISA cards).
*/
static struct devprobe isa_probes[] __initdata = {
-#ifdef CONFIG_EL3 /* ISA, EISA, MCA 3c5x9 */
- {el3_probe, 0},
-#endif
#ifdef CONFIG_HP100 /* ISA, EISA & PCI */
{hp100_probe, 0},
#endif
--
Places change, faces change. Life is so very strange.
\
 
 \ /
  Last update: 2005-03-22 13:30    [W:0.078 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site