lkml.org 
[lkml]   [2002]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] x86 BIOS Enhanced Disk Drive services
Patch appended, and at:
http://domsch.com/linux/edd30/edd-driverfs-6.patch
http://domsch.com/linux/edd30/edd-driverfs-6.patch.sign

--
Matt Domsch
Sr. Software Engineer, Lead Engineer, Architect
Dell Linux Solutions www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/Documentation/i386/zero-page.txt linux-2.5-edd/Documentation/i386/zero-page.txt
--- linux-2.5/Documentation/i386/zero-page.txt Wed Oct 9 15:01:16 2002
+++ linux-2.5-edd/Documentation/i386/zero-page.txt Wed Oct 9 14:54:57 2002
@@ -31,6 +31,7 @@

0x1e0 unsigned long ALT_MEM_K, alternative mem check, in Kb
0x1e8 char number of entries in E820MAP (below)
+0x1e9 unsigned char number of entries in EDDBUF (below)
0x1f1 char size of setup.S, number of sectors
0x1f2 unsigned short MOUNT_ROOT_RDONLY (if !=0)
0x1f4 unsigned short size of compressed kernel-part in the
@@ -66,6 +67,7 @@
0x220 4 bytes (setup.S)
0x224 unsigned short setup.S heap end pointer
0x2d0 - 0x600 E820MAP
+0x600 - 0x7D4 EDDBUF (setup.S)

0x800 string, 2K max COMMAND_LINE, the kernel commandline as
copied using CL_OFFSET.
diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/Config.help linux-2.5-edd/arch/i386/Config.help
--- linux-2.5/arch/i386/Config.help Wed Oct 9 15:01:18 2002
+++ linux-2.5-edd/arch/i386/Config.help Wed Oct 9 14:54:59 2002
@@ -1075,3 +1075,11 @@

This support is also available as a module. If compiled as a
module, it will be called scx200.o.
+
+CONFIG_EDD
+ Say Y or M here if you want to enable BIOS Enhanced Disk Drive
+ Services real mode BIOS calls to determine which disk
+ BIOS tries boot from. This information is then exported via driverfs.
+
+ This option is experimental, but believed to be safe,
+ and most disk controller BIOS vendors do not yet implement this feature.
diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/boot/setup.S linux-2.5-edd/arch/i386/boot/setup.S
--- linux-2.5/arch/i386/boot/setup.S Wed Oct 9 15:01:18 2002
+++ linux-2.5-edd/arch/i386/boot/setup.S Wed Oct 9 14:54:59 2002
@@ -44,6 +44,9 @@
*
* New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes
* by Robert Schwebel, December 2001 <robert@schwebel.de>
+ *
+ * BIOS Enhanced Disk Drive support
+ * by Matt Domsch <Matt_Domsch@dell.com> September 2002
*
*/

@@ -53,6 +56,7 @@
#include <linux/compile.h>
#include <asm/boot.h>
#include <asm/e820.h>
+#include <asm/edd.h>
#include <asm/page.h>

/* Signature words to ensure LILO loaded us right */
@@ -541,6 +545,49 @@
no_32_apm_bios:
andw $0xfffd, (76) # remove 32 bit support bit
done_apm_bios:
+#endif
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+# Do the BIOS Enhanced Disk Drive calls
+# This code is sensitive to the size of the structs in edd.h
+edd_start:
+ # %ds points to the bootsector
+ # result buffer for fn48
+ movw $EDDBUF+EDDEXTSIZE, %si # in ds:si, fn41 results
+ # kept just before that
+ movb $0, (EDDNR) # zero value at EDDNR
+ movb $0x80, %dl # BIOS device 0x80
+
+edd_check_ext:
+ movb $0x41, %ah # Function 41
+ movw $0x55aa, %bx # magic
+ int $0x13 # make the call
+ jc edd_done # no more BIOS devices
+
+ cmpw $0xAA55, %bx # is magic right?
+ jne edd_next # nope, next...
+
+ movb %dl, %ds:-4(%si) # store device number
+ movb %ah, %ds:-3(%si) # store version
+ movw %cx, %ds:-2(%si) # store extensions
+ incb (EDDNR) # note that we stored something
+
+edd_get_device_params:
+ movw $EDDPARMSIZE, %ds:(%si) # put size
+ movb $0x48, %ah # Function 48
+ int $0x13 # make the call
+ # Don't check for fail return
+ # it doesn't matter.
+ movw %si, %ax # increment si
+ addw $EDDPARMSIZE+EDDEXTSIZE, %ax
+ movw %ax, %si
+
+edd_next:
+ incb %dl # increment to next device
+ cmpb $EDDMAXNR, (EDDNR) # Out of space?
+ jb edd_check_ext # keep looping
+
+edd_done:
#endif

# Now we want to move to protected mode ...
diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/config.in linux-2.5-edd/arch/i386/config.in
--- linux-2.5/arch/i386/config.in Wed Oct 9 15:01:18 2002
+++ linux-2.5-edd/arch/i386/config.in Wed Oct 9 14:54:59 2002
@@ -215,6 +215,10 @@
tristate '/dev/cpu/*/msr - Model-specific register support' CONFIG_X86_MSR
tristate '/dev/cpu/*/cpuid - CPU information support' CONFIG_X86_CPUID

+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ tristate 'BIOS Enhanced Disk Drive calls determine boot disk (EXPERIMENTAL)' CONFIG_EDD
+fi
+
choice 'High Memory Support' \
"off CONFIG_NOHIGHMEM \
4GB CONFIG_HIGHMEM4G \
diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/defconfig linux-2.5-edd/arch/i386/defconfig
--- linux-2.5/arch/i386/defconfig Wed Oct 9 15:01:18 2002
+++ linux-2.5-edd/arch/i386/defconfig Wed Oct 9 14:54:59 2002
@@ -70,6 +70,7 @@
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
+# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/kernel/Makefile linux-2.5-edd/arch/i386/kernel/Makefile
--- linux-2.5/arch/i386/kernel/Makefile Wed Oct 9 15:01:18 2002
+++ linux-2.5-edd/arch/i386/kernel/Makefile Wed Oct 9 14:54:59 2002
@@ -26,6 +26,7 @@
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o
obj-$(CONFIG_X86_NUMAQ) += numaq.o
+obj-$(CONFIG_EDD) += edd.o

EXTRA_AFLAGS := -traditional

diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/kernel/edd.c linux-2.5-edd/arch/i386/kernel/edd.c
--- linux-2.5/arch/i386/kernel/edd.c Wed Dec 31 18:00:00 1969
+++ linux-2.5-edd/arch/i386/kernel/edd.c Wed Oct 9 14:54:59 2002
@@ -0,0 +1,984 @@
+/*
+ * linux/arch/i386/kernel/edd.c
+ * Copyright (C) 2002 Dell Computer Corporation
+ * by Matt Domsch <Matt_Domsch@dell.com>
+ *
+ * BIOS Enhanced Disk Drive Services (EDD)
+ * conformant to T13 Committee www.t13.org
+ * projects 1572D, 1484D, 1386D, 1226DT
+ *
+ * This code takes information provided by BIOS EDD calls
+ * fn41 - Check Extensions Present and
+ * fn48 - Get Device Parametes with EDD extensions
+ * made in setup.S, copied to safe structures in setup.c,
+ * and presents it in driverfs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/*
+ * Known issues:
+ * - module unload leaves a directory around. Seems related to
+ * creating symlinks in that directory. Seen on kernel 2.5.41.
+ * - refcounting of struct device objects could be improved.
+ *
+ * TODO:
+ * - Add IDE and USB disk device support
+ * - when driverfs model of discs and partitions changes,
+ * update symlink accordingly.
+ * - Get symlink creator helper functions exported from
+ * drivers/base instead of duplicating them here.
+ * - move edd.[ch] to better locations if/when one is decided
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/limits.h>
+#include <linux/driverfs_fs.h>
+#include <linux/pci.h>
+#include <asm/edd.h>
+#include <linux/device.h>
+#include <linux/blkdev.h>
+/* FIXME - this really belongs in include/scsi/scsi.h */
+#include <../drivers/scsi/scsi.h>
+#include <../drivers/scsi/hosts.h>
+
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
+MODULE_DESCRIPTION("driverfs interface to BIOS EDD information");
+MODULE_LICENSE("GPL");
+
+#define EDD_VERSION "0.06 2002-Oct-09"
+#define EDD_DEVICE_NAME_SIZE 16
+#define REPORT_URL "http://domsch.com/linux/edd30/results.html"
+
+/*
+ * bios_dir may go away completely,
+ * and it definitely won't be at the root
+ * of driverfs forever.
+ */
+static struct driver_dir_entry bios_dir = {
+ .name = "bios",
+ .mode = (S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO),
+};
+
+struct edd_device {
+ char name[EDD_DEVICE_NAME_SIZE];
+ struct edd_info *info;
+ struct list_head node;
+ struct driver_dir_entry dir;
+};
+
+struct edd_attribute {
+ struct attribute attr;
+ ssize_t(*show) (struct edd_device * edev, char *buf, size_t count,
+ loff_t off);
+};
+
+/* forward declarations */
+static int edd_dev_is_type(struct edd_device *edev, const char *type);
+static struct pci_dev *edd_get_pci_dev(struct edd_device *edev);
+static struct scsi_device *edd_find_matching_scsi_device(struct edd_device *edev);
+
+static struct edd_device *edd_devices[EDDMAXNR];
+
+#define EDD_DEVICE_ATTR(_name,_mode,_show) \
+struct edd_attribute edd_attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
+ .show = _show, \
+};
+
+static inline struct edd_info *
+edd_dev_get_info(struct edd_device *edev)
+{
+ return edev->info;
+}
+static inline void
+edd_dev_set_info(struct edd_device *edev, struct edd_info *info)
+{
+ edev->info = info;
+}
+
+#define to_edd_attr(_attr) container_of(_attr,struct edd_attribute,attr)
+#define to_edd_device(_dir) container_of(_dir,struct edd_device,dir)
+
+static ssize_t
+edd_attr_show(struct driver_dir_entry *dir, struct attribute *attr,
+ char *buf, size_t count, loff_t off)
+{
+ struct edd_device *dev = to_edd_device(dir);
+ struct edd_attribute *edd_attr = to_edd_attr(attr);
+ ssize_t ret = 0;
+
+ if (edd_attr->show)
+ ret = edd_attr->show(dev, buf, count, off);
+ return ret;
+}
+
+static struct driverfs_ops edd_attr_ops = {
+ .show = edd_attr_show,
+};
+
+static int
+edd_dump_raw_data(char *b, void *data, int length)
+{
+ char *orig_b = b;
+ char buffer1[80], buffer2[80], *b1, *b2, c;
+ unsigned char *p = data;
+ unsigned long column = 0;
+ int length_printed = 0;
+ const char maxcolumn = 16;
+ while (length_printed < length) {
+ b1 = buffer1;
+ b2 = buffer2;
+ for (column = 0;
+ column < maxcolumn && length_printed < length; column++) {
+ b1 += sprintf(b1, "%02x ", (unsigned char) *p);
+ if (*p < 32 || *p > 126)
+ c = '.';
+ else
+ c = *p;
+ b2 += sprintf(b2, "%c", c);
+ p++;
+ length_printed++;
+ }
+ /* pad out the line */
+ for (; column < maxcolumn; column++) {
+ b1 += sprintf(b1, " ");
+ b2 += sprintf(b2, " ");
+ }
+
+ b += sprintf(b, "%s\t%s\n", buffer1, buffer2);
+ }
+ return (b - orig_b);
+}
+
+static ssize_t
+edd_show_host_bus(struct edd_device *edev, char *buf, size_t count, loff_t off)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ int i;
+
+ if (!edev || !info || !buf || off) {
+ return 0;
+ }
+
+ for (i = 0; i < 4; i++) {
+ if (isprint(info->params.host_bus_type[i])) {
+ p += sprintf(p, "%c", info->params.host_bus_type[i]);
+ } else {
+ p += sprintf(p, " ");
+ }
+ }
+
+ if (!strncmp(info->params.host_bus_type, "ISA", 3)) {
+ p += sprintf(p, "\tbase_address: %x\n",
+ info->params.interface_path.isa.base_address);
+ } else if (!strncmp(info->params.host_bus_type, "PCIX", 4) ||
+ !strncmp(info->params.host_bus_type, "PCI", 3)) {
+ p += sprintf(p,
+ "\t%02x:%02x.%01x channel: %u\n",
+ info->params.interface_path.pci.bus,
+ info->params.interface_path.pci.slot,
+ info->params.interface_path.pci.function,
+ info->params.interface_path.pci.channel);
+ } else if (!strncmp(info->params.host_bus_type, "IBND", 4) ||
+ !strncmp(info->params.host_bus_type, "XPRS", 4) ||
+ !strncmp(info->params.host_bus_type, "HTPT", 4)) {
+ p += sprintf(p,
+ "\tTBD: %llx\n",
+ info->params.interface_path.ibnd.reserved);
+
+ } else {
+ p += sprintf(p, "\tunknown: %llx\n",
+ info->params.interface_path.unknown.reserved);
+ }
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_interface(struct edd_device *edev, char *buf, size_t count, loff_t off)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ int i;
+
+ if (!edev || !info || !buf || off) {
+ return 0;
+ }
+
+ for (i = 0; i < 8; i++) {
+ if (isprint(info->params.interface_type[i])) {
+ p += sprintf(p, "%c", info->params.interface_type[i]);
+ } else {
+ p += sprintf(p, " ");
+ }
+ }
+ if (!strncmp(info->params.interface_type, "ATAPI", 5)) {
+ p += sprintf(p, "\tdevice: %u lun: %u\n",
+ info->params.device_path.atapi.device,
+ info->params.device_path.atapi.lun);
+ } else if (!strncmp(info->params.interface_type, "ATA", 3)) {
+ p += sprintf(p, "\tdevice: %u\n",
+ info->params.device_path.ata.device);
+ } else if (!strncmp(info->params.interface_type, "SCSI", 4)) {
+ p += sprintf(p, "\tid: %u lun: %llu\n",
+ info->params.device_path.scsi.id,
+ info->params.device_path.scsi.lun);
+ } else if (!strncmp(info->params.interface_type, "USB", 3)) {
+ p += sprintf(p, "\tserial_number: %llx\n",
+ info->params.device_path.usb.serial_number);
+ } else if (!strncmp(info->params.interface_type, "1394", 4)) {
+ p += sprintf(p, "\teui: %llx\n",
+ info->params.device_path.i1394.eui);
+ } else if (!strncmp(info->params.interface_type, "FIBRE", 5)) {
+ p += sprintf(p, "\twwid: %llx lun: %llx\n",
+ info->params.device_path.fibre.wwid,
+ info->params.device_path.fibre.lun);
+ } else if (!strncmp(info->params.interface_type, "I2O", 3)) {
+ p += sprintf(p, "\tidentity_tag: %llx\n",
+ info->params.device_path.i2o.identity_tag);
+ } else if (!strncmp(info->params.interface_type, "RAID", 4)) {
+ p += sprintf(p, "\tidentity_tag: %x\n",
+ info->params.device_path.raid.array_number);
+ } else if (!strncmp(info->params.interface_type, "SATA", 4)) {
+ p += sprintf(p, "\tdevice: %u\n",
+ info->params.device_path.sata.device);
+ } else {
+ p += sprintf(p, "\tunknown: %llx %llx\n",
+ info->params.device_path.unknown.reserved1,
+ info->params.device_path.unknown.reserved2);
+ }
+
+ return (p - buf);
+}
+
+/**
+ * edd_show_raw_data() - unparses EDD information, returned to user-space
+ *
+ * Returns: number of bytes written, or 0 on failure
+ */
+static ssize_t
+edd_show_raw_data(struct edd_device *edev, char *buf, size_t count, loff_t off)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ int i, rc, warn_padding = 0, email = 0, nonzero_path = 0,
+ len = sizeof (*edd) - 4, found_pci=0;
+ uint8_t checksum = 0, c = 0;
+ char *p = buf;
+ struct pci_dev *pci_dev=NULL;
+ struct scsi_device *sd;
+ if (!edev || !info || !buf || off) {
+ return 0;
+ }
+
+ if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE))
+ len = info->params.length;
+
+ p += sprintf(p, "int13 fn48 returned data:\n\n");
+ p += edd_dump_raw_data(p, ((char *) edd) + 4, len);
+
+ /* Spec violation. Adaptec AIC7899 returns 0xDDBE
+ here, when it should be 0xBEDD.
+ */
+ p += sprintf(p, "\n");
+ if (info->params.key == 0xDDBE) {
+ p += sprintf(p,
+ "Warning: Spec violation. Key should be 0xBEDD, is 0xDDBE\n");
+ email++;
+ }
+
+ if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE)) {
+ goto out;
+ }
+
+ for (i = 30; i <= 73; i++) {
+ c = *(((uint8_t *) edd) + i + 4);
+ if (c)
+ nonzero_path++;
+ checksum += c;
+ }
+
+ if (checksum) {
+ p += sprintf(p,
+ "Warning: Spec violation. Device Path checksum invalid.\n");
+ email++;
+ }
+
+ if (!nonzero_path) {
+ p += sprintf(p, "Error: Spec violation. Empty device path.\n");
+ email++;
+ goto out;
+ }
+
+ for (i = 0; i < 4; i++) {
+ if (!isprint(info->params.host_bus_type[i])) {
+ warn_padding++;
+ }
+ }
+ for (i = 0; i < 8; i++) {
+ if (!isprint(info->params.interface_type[i])) {
+ warn_padding++;
+ }
+ }
+
+ if (warn_padding) {
+ p += sprintf(p,
+ "Warning: Spec violation. Padding should be 0x20.\n");
+ email++;
+ }
+
+ rc = edd_dev_is_type(edev, "PCI");
+ if (!rc) {
+ pci_dev = pci_find_slot(info->params.interface_path.pci.bus,
+ PCI_DEVFN(info->params.interface_path.
+ pci.slot,
+ info->params.interface_path.
+ pci.function));
+ if (!pci_dev) {
+ p += sprintf(p, "Error: BIOS says this is a PCI device, but the OS doesn't know\n");
+ p += sprintf(p, " about a PCI device at %02x:%02x.%01x\n",
+ info->params.interface_path.pci.bus,
+ info->params.interface_path.pci.slot,
+ info->params.interface_path.pci.function);
+ email++;
+ }
+ else {
+ found_pci++;
+ }
+ }
+
+ if (found_pci) {
+ sd = edd_find_matching_scsi_device(edev);
+ if (!sd) {
+ p += sprintf(p, "Error: BIOS says this is a SCSI device, but\n");
+ p += sprintf(p, " the OS doesn't know about this SCSI device.\n");
+ p += sprintf(p, " Do you have it's driver module loaded?\n");
+ email++;
+ }
+ }
+
+out:
+ if (email) {
+ p += sprintf(p, "\nPlease check %s\n", REPORT_URL);
+ p += sprintf(p, "to see if this has been reported. If not,\n");
+ p += sprintf(p, "please send the information requested there.\n");
+ }
+
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_version(struct edd_device *edev, char *buf, size_t count, loff_t off)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf || off) {
+ return 0;
+ }
+
+ p += sprintf(p, "0x%02x\n", info->version);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_extensions(struct edd_device *edev, char *buf, size_t count,
+ loff_t off)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf || off) {
+ return 0;
+ }
+
+ if (info->interface_support & EDD_EXT_FIXED_DISK_ACCESS) {
+ p += sprintf(p, "Fixed disk access\n");
+ }
+ if (info->interface_support & EDD_EXT_DEVICE_LOCKING_AND_EJECTING) {
+ p += sprintf(p, "Device locking and ejecting\n");
+ }
+ if (info->interface_support & EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT) {
+ p += sprintf(p, "Enhanced Disk Drive support\n");
+ }
+ if (info->interface_support & EDD_EXT_64BIT_EXTENSIONS) {
+ p += sprintf(p, "64-bit extensions\n");
+ }
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_info_flags(struct edd_device *edev, char *buf, size_t count,
+ loff_t off)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf || off) {
+ return 0;
+ }
+
+ if (info->params.info_flags & EDD_INFO_DMA_BOUNDRY_ERROR_TRANSPARENT)
+ p += sprintf(p, "DMA boundry error transparent\n");
+ if (info->params.info_flags & EDD_INFO_GEOMETRY_VALID)
+ p += sprintf(p, "geometry valid\n");
+ if (info->params.info_flags & EDD_INFO_REMOVABLE)
+ p += sprintf(p, "removable\n");
+ if (info->params.info_flags & EDD_INFO_WRITE_VERIFY)
+ p += sprintf(p, "write verify\n");
+ if (info->params.info_flags & EDD_INFO_MEDIA_CHANGE_NOTIFICATION)
+ p += sprintf(p, "media change notification\n");
+ if (info->params.info_flags & EDD_INFO_LOCKABLE)
+ p += sprintf(p, "lockable\n");
+ if (info->params.info_flags & EDD_INFO_NO_MEDIA_PRESENT)
+ p += sprintf(p, "no media present\n");
+ if (info->params.info_flags & EDD_INFO_USE_INT13_FN50)
+ p += sprintf(p, "use int13 fn50\n");
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_default_cylinders(struct edd_device *edev, char *buf, size_t count,
+ loff_t off)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf || off) {
+ return 0;
+ }
+
+ p += sprintf(p, "0x%x\n", info->params.num_default_cylinders);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_default_heads(struct edd_device *edev, char *buf, size_t count,
+ loff_t off)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf || off) {
+ return 0;
+ }
+
+ p += sprintf(p, "0x%x\n", info->params.num_default_heads);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_default_sectors_per_track(struct edd_device *edev, char *buf,
+ size_t count, loff_t off)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf || off) {
+ return 0;
+ }
+
+ p += sprintf(p, "0x%x\n", info->params.sectors_per_track);
+ return (p - buf);
+}
+
+static ssize_t
+edd_show_sectors(struct edd_device *edev, char *buf, size_t count, loff_t off)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ char *p = buf;
+ if (!edev || !info || !buf || off) {
+ return 0;
+ }
+
+ p += sprintf(p, "0x%llx\n", info->params.number_of_sectors);
+ return (p - buf);
+}
+
+static EDD_DEVICE_ATTR(raw_data, 0444, edd_show_raw_data);
+static EDD_DEVICE_ATTR(version, 0444, edd_show_version);
+static EDD_DEVICE_ATTR(extensions, 0444, edd_show_extensions);
+static EDD_DEVICE_ATTR(info_flags, 0444, edd_show_info_flags);
+static EDD_DEVICE_ATTR(default_cylinders, 0444, edd_show_default_cylinders);
+static EDD_DEVICE_ATTR(default_heads, 0444, edd_show_default_heads);
+static EDD_DEVICE_ATTR(default_sectors_per_track, 0444,
+ edd_show_default_sectors_per_track);
+static EDD_DEVICE_ATTR(sectors, 0444, edd_show_sectors);
+static EDD_DEVICE_ATTR(interface, 0444, edd_show_interface);
+static EDD_DEVICE_ATTR(host_bus, 0444, edd_show_host_bus);
+
+/*
+ * Some device instances may not have all the above attributes,
+ * or the attribute values may be meaningless (i.e. if
+ * the device is < EDD 3.0, it won't have host_bus and interface
+ * information), so don't bother making files for them. Likewise
+ * if the default_{cylinders,heads,sectors_per_track} values
+ * are zero, the BIOS doesn't provide sane values, don't bother
+ * creating files for them either.
+ *
+ * struct attr_test pairs an attribute and a test,
+ * (the default NULL test being true - the attribute exists)
+ * and individual existence tests may be written for each
+ * attribute.
+ */
+struct attr_test {
+ struct edd_attribute *attr;
+ int (*test) (struct edd_device * edev);
+};
+
+static int
+edd_has_default_cylinders(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return 1;
+ return !info->params.num_default_cylinders;
+}
+
+static int
+edd_has_default_heads(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return 1;
+ return !info->params.num_default_heads;
+}
+
+static int
+edd_has_default_sectors_per_track(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return 1;
+ return !info->params.sectors_per_track;
+}
+
+static int
+edd_has_edd30(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ int i, nonzero_path = 0;
+ char c;
+
+ if (!edev || !info)
+ return 1;
+
+ if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE)) {
+ return 1;
+ }
+
+ for (i = 30; i <= 73; i++) {
+ c = *(((uint8_t *) edd) + i + 4);
+ if (c) {
+ nonzero_path++;
+ break;
+ }
+ }
+ if (!nonzero_path) {
+ return 1;
+ }
+
+ return 0;
+}
+
+static struct attr_test def_attrs[] = {
+ {.attr = &edd_attr_raw_data},
+ {.attr = &edd_attr_version},
+ {.attr = &edd_attr_extensions},
+ {.attr = &edd_attr_info_flags},
+ {.attr = &edd_attr_sectors},
+ {.attr = &edd_attr_default_cylinders,
+ .test = &edd_has_default_cylinders},
+ {.attr = &edd_attr_default_heads,
+ .test = &edd_has_default_heads},
+ {.attr = &edd_attr_default_sectors_per_track,
+ .test = &edd_has_default_sectors_per_track},
+ {.attr = &edd_attr_interface,
+ .test = &edd_has_edd30},
+ {.attr = &edd_attr_host_bus,
+ .test = &edd_has_edd30},
+ {.attr = NULL,.test = NULL},
+};
+
+/* edd_get_devpath_length(), edd_fill_devpath(), and edd_device_link()
+ were taken from linux/drivers/base/fs/device.c. When these
+ or similar are exported to generic code, remove these.
+*/
+
+static int
+edd_get_devpath_length(struct device *dev)
+{
+ int length = 1;
+ struct device *parent = dev;
+
+ /* walk up the ancestors until we hit the root.
+ * Add 1 to strlen for leading '/' of each level.
+ */
+ do {
+ length += strlen(parent->bus_id) + 1;
+ parent = parent->parent;
+ } while (parent);
+ return length;
+}
+
+static void
+edd_fill_devpath(struct device *dev, char *path, int length)
+{
+ struct device *parent;
+ --length;
+ for (parent = dev; parent; parent = parent->parent) {
+ int cur = strlen(parent->bus_id);
+
+ /* back up enough to print this bus id with '/' */
+ length -= cur;
+ strncpy(path + length, parent->bus_id, cur);
+ *(path + --length) = '/';
+ }
+}
+
+static int
+edd_device_symlink(struct edd_device *edev, struct device *dev, char *name)
+{
+ char *path;
+ int length;
+ int error = 0;
+
+ if (!dev->bus || !name)
+ return 0;
+
+ length = edd_get_devpath_length(dev);
+
+ /* now add the path from the edd_device directory
+ * It should be '../..' (one to get to the 'bios' directory,
+ * and one to get to the root of the fs.)
+ */
+ length += strlen("../../root");
+
+ if (length > PATH_MAX)
+ return -ENAMETOOLONG;
+
+ if (!(path = kmalloc(length, GFP_KERNEL)))
+ return -ENOMEM;
+ memset(path, 0, length);
+
+ /* our relative position */
+ strcpy(path, "../../root");
+
+ edd_fill_devpath(dev, path, length);
+ error = driverfs_create_symlink(&edev->dir, name, path);
+ kfree(path);
+ return error;
+}
+
+/**
+ * edd_dev_is_type() - is this EDD device a 'type' device?
+ * @edev
+ * @type - a host bus or interface identifier string per the EDD spec
+ *
+ * Returns 0 if it is a 'type' device, nonzero otherwise.
+ */
+static int
+edd_dev_is_type(struct edd_device *edev, const char *type)
+{
+ int rc;
+ struct edd_info *info = edd_dev_get_info(edev);
+ if (!edev || !info)
+ return 1;
+
+ rc = strncmp(info->params.host_bus_type, type, strlen(type));
+ if (!rc)
+ return 0;
+
+ return strncmp(info->params.interface_type, type, strlen(type));
+}
+
+/**
+ * edd_get_pci_dev() - finds pci_dev that matches edev
+ * @edev - edd_device
+ *
+ * Returns pci_dev if found, or NULL
+ */
+static struct pci_dev *
+edd_get_pci_dev(struct edd_device *edev)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+ int rc;
+
+ rc = edd_dev_is_type(edev, "PCI");
+ if (rc)
+ return NULL;
+
+ return pci_find_slot(info->params.interface_path.pci.bus,
+ PCI_DEVFN(info->params.interface_path.pci.slot,
+ info->params.interface_path.pci.
+ function));
+}
+
+static int
+edd_create_symlink_to_pcidev(struct edd_device *edev)
+{
+
+ struct pci_dev *pci_dev = edd_get_pci_dev(edev);
+ if (!pci_dev)
+ return 1;
+ return edd_device_symlink(edev, &pci_dev->dev, "pci_dev");
+}
+
+/**
+ * edd_match_scsidev()
+ * @edev - EDD device is a known SCSI device
+ * @sd - scsi_device with host who's parent is a PCI controller
+ *
+ * returns 0 on success, 1 on failure
+ */
+static int
+edd_match_scsidev(struct edd_device *edev, struct scsi_device *sd)
+{
+ struct edd_info *info = edd_dev_get_info(edev);
+
+ if (!edev || !sd || !info)
+ return 1;
+
+ if ((sd->channel == info->params.interface_path.pci.channel) &&
+ (sd->id == info->params.device_path.scsi.id) &&
+ (sd->lun == info->params.device_path.scsi.lun)) {
+ return 0;
+ }
+
+ return 1;
+}
+
+/**
+ * edd_find_matching_device()
+ * @edev - edd_device to match
+ *
+ * Returns struct scsi_device * on success,
+ * or NULL on failure.
+ * This assumes that all children of the PCI controller
+ * are scsi_hosts, and that all children of scsi_hosts
+ * are scsi_devices.
+ * The reference counting probably isn't the best it could be.
+ */
+
+#define to_scsi_host(d) \
+ container_of(d, struct Scsi_Host, host_driverfs_dev)
+#define children_to_dev(n) container_of(n,struct device,node)
+static struct scsi_device *
+edd_find_matching_scsi_device(struct edd_device *edev)
+{
+ struct list_head *shost_node, *sdev_node;
+ int rc = 1;
+ struct scsi_device *sd = NULL;
+ struct device *shost_dev, *sdev_dev;
+ struct pci_dev *pci_dev;
+ struct Scsi_Host *sh;
+
+ rc = edd_dev_is_type(edev, "SCSI");
+ if (rc)
+ return NULL;
+
+ pci_dev = edd_get_pci_dev(edev);
+ if (!pci_dev)
+ return NULL;
+
+ get_device(&pci_dev->dev);
+
+ list_for_each(shost_node, &pci_dev->dev.children) {
+ shost_dev = children_to_dev(shost_node);
+ get_device(shost_dev);
+ sh = to_scsi_host(shost_dev);
+
+ list_for_each(sdev_node, &shost_dev->children) {
+ sdev_dev = children_to_dev(sdev_node);
+ get_device(sdev_dev);
+ sd = to_scsi_device(sdev_dev);
+ rc = edd_match_scsidev(edev, sd);
+ put_device(sdev_dev);
+ if (!rc)
+ break;
+ }
+ put_device(shost_dev);
+ if (!rc)
+ break;
+ }
+
+ put_device(&pci_dev->dev);
+ if (!rc)
+ return sd;
+ return NULL;
+}
+
+static int
+edd_create_symlink_to_scsidev(struct edd_device *edev)
+{
+
+ struct scsi_device *sdev;
+ struct pci_dev *pci_dev;
+ struct edd_info *info = edd_dev_get_info(edev);
+ int rc;
+
+ rc = edd_dev_is_type(edev, "PCI");
+ if (rc)
+ return rc;
+
+ pci_dev = pci_find_slot(info->params.interface_path.pci.bus,
+ PCI_DEVFN(info->params.interface_path.pci.slot,
+ info->params.interface_path.pci.
+ function));
+ if (!pci_dev)
+ return 1;
+
+ sdev = edd_find_matching_scsi_device(edev);
+ if (!sdev)
+ return 1;
+
+ get_device(&sdev->sdev_driverfs_dev);
+ rc = edd_device_symlink(edev, &sdev->sdev_driverfs_dev, "disc");
+ put_device(&sdev->sdev_driverfs_dev);
+
+ return rc;
+}
+
+static inline int
+edd_create_file(struct edd_device *edev, struct edd_attribute *attr)
+{
+ return driverfs_create_file(&attr->attr, &edev->dir);
+}
+
+static inline void
+edd_device_unregister(struct edd_device *edev)
+{
+ driverfs_remove_file(&edev->dir, "pci_dev");
+ driverfs_remove_file(&edev->dir, "disc");
+ driverfs_remove_dir(&edev->dir);
+ list_del_init(&edev->node);
+}
+
+static int
+edd_populate_dir(struct edd_device *edev)
+{
+ struct attr_test *s;
+ int i;
+ int error = 0;
+
+ for (i = 0; def_attrs[i].attr; i++) {
+ s = &def_attrs[i];
+ if (!s->test || (s->test && !s->test(edev))) {
+ if ((error = edd_create_file(edev, s->attr))) {
+ break;
+ }
+ }
+ }
+
+ if (error)
+ return error;
+
+ edd_create_symlink_to_pcidev(edev);
+ edd_create_symlink_to_scsidev(edev);
+
+ return 0;
+}
+
+static int
+edd_make_dir(struct edd_device *edev)
+{
+ int error;
+
+ edev->dir.name = edev->name;
+ edev->dir.mode = (S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO);
+ edev->dir.ops = &edd_attr_ops;
+
+ error = driverfs_create_dir(&edev->dir, &bios_dir);
+ if (!error)
+ error = edd_populate_dir(edev);
+ return error;
+}
+
+static int
+edd_device_register(struct edd_device *edev, int i)
+{
+ int error;
+
+ if (!edev)
+ return 1;
+ memset(edev, 0, sizeof (*edev));
+ edd_dev_set_info(edev, &edd[i]);
+ snprintf(edev->name, EDD_DEVICE_NAME_SIZE, "int13_dev%02x",
+ edd[i].device);
+ error = edd_make_dir(edev);
+ return error;
+}
+
+/**
+ * edd_init() - creates driverfs tree of EDD data
+ *
+ * This assumes that eddnr and edd were
+ * assigned in setup.c already.
+ */
+static int __init
+edd_init(void)
+{
+ unsigned int i;
+ int rc;
+ struct edd_device *edev;
+
+ printk(KERN_INFO "BIOS EDD facility v%s, %d devices found\n",
+ EDD_VERSION, eddnr);
+
+ if (!eddnr) {
+ printk(KERN_INFO "EDD information not available.\n");
+ return 1;
+ }
+
+ rc = driverfs_create_dir(&bios_dir, NULL);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < eddnr && i < EDDMAXNR && !rc; i++) {
+ edev = kmalloc(sizeof (*edev), GFP_KERNEL);
+ if (!edev)
+ return -ENOMEM;
+
+ rc = edd_device_register(edev, i);
+ if (rc) {
+ kfree(edev);
+ break;
+ }
+ edd_devices[i] = edev;
+ }
+
+ if (rc) {
+ driverfs_remove_dir(&bios_dir);
+ return rc;
+ }
+
+ return 0;
+}
+
+static void __exit
+edd_exit(void)
+{
+ int i;
+ struct edd_device *edev;
+
+ for (i = 0; i < eddnr && i < EDDMAXNR; i++) {
+ if ((edev = edd_devices[i])) {
+ edd_device_unregister(edev);
+ kfree(edev);
+ }
+ }
+
+ driverfs_remove_dir(&bios_dir);
+}
+
+late_initcall(edd_init);
+module_exit(edd_exit);
diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/kernel/i386_ksyms.c linux-2.5-edd/arch/i386/kernel/i386_ksyms.c
--- linux-2.5/arch/i386/kernel/i386_ksyms.c Wed Oct 9 15:01:18 2002
+++ linux-2.5-edd/arch/i386/kernel/i386_ksyms.c Wed Oct 9 14:54:59 2002
@@ -29,6 +29,7 @@
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
+#include <asm/edd.h>

extern void dump_thread(struct pt_regs *, struct user *);
extern spinlock_t rtc_lock;
@@ -182,3 +183,8 @@
EXPORT_SYMBOL(is_sony_vaio_laptop);

EXPORT_SYMBOL(__PAGE_KERNEL);
+
+#ifdef CONFIG_EDD_MODULE
+EXPORT_SYMBOL(edd);
+EXPORT_SYMBOL(eddnr);
+#endif
diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/kernel/setup.c linux-2.5-edd/arch/i386/kernel/setup.c
--- linux-2.5/arch/i386/kernel/setup.c Wed Oct 9 15:01:18 2002
+++ linux-2.5-edd/arch/i386/kernel/setup.c Wed Oct 9 14:54:59 2002
@@ -36,6 +36,7 @@
#include <linux/highmem.h>
#include <asm/e820.h>
#include <asm/mpspec.h>
+#include <asm/edd.h>
#include <asm/setup.h>
#include <asm/arch_hooks.h>
#include "setup_arch_pre.h"
@@ -466,6 +467,22 @@
return 0;
}

+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+unsigned char eddnr;
+struct edd_info edd[EDDNR];
+/**
+ * copy_edd() - Copy the BIOS EDD information into a safe place.
+ *
+ */
+static inline void copy_edd(void)
+{
+ eddnr = EDD_NR;
+ memcpy(edd, EDD_BUF, sizeof(edd));
+}
+#else
+#define copy_edd() do {} while (0)
+#endif
+
/*
* Do NOT EVER look at the BIOS memory size location.
* It does not work on many machines.
@@ -843,6 +860,7 @@
#endif
ARCH_SETUP
setup_memory_region();
+ copy_edd();

if (!MOUNT_ROOT_RDONLY)
root_mountflags &= ~MS_RDONLY;
diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/include/asm-i386/edd.h linux-2.5-edd/include/asm-i386/edd.h
--- linux-2.5/include/asm-i386/edd.h Wed Dec 31 18:00:00 1969
+++ linux-2.5-edd/include/asm-i386/edd.h Wed Oct 9 14:55:28 2002
@@ -0,0 +1,168 @@
+/*
+ * linux/include/asm-i386/edd.h
+ * Copyright (C) 2002 Dell Computer Corporation
+ * by Matt Domsch <Matt_Domsch@dell.com>
+ *
+ * structures and definitions for the int 13h, ax={41,48}h
+ * BIOS Enhanced Disk Drive Services
+ * This is based on the T13 group document D1572 Revision 0 (August 14 2002)
+ * available at http://www.t13.org/docs2002/d1572r0.pdf. It is
+ * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf
+ *
+ * In a nutshell, arch/i386/boot/setup.S populates a scratch table
+ * in the empty_zero_block that contains a list of BIOS-enumerated
+ * boot devices.
+ * In arch/i386/kernel/setup.c, this information is
+ * transferred into the edd structure, and in arch/i386/kernel/edd.c, that
+ * information is used to identify BIOS boot disk. The code in setup.S
+ * is very sensitive to the size of these structures.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _ASM_I386_EDD_H
+#define _ASM_I386_EDD_H
+
+#define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF
+ in empty_zero_block - treat this as 1 byte */
+#define EDDBUF 0x600 /* addr of edd_info structs in empty_zero_block */
+#define EDDMAXNR 6 /* number of edd_info structs starting at EDDBUF */
+#define EDDEXTSIZE 4 /* change these if you muck with the structures */
+#define EDDPARMSIZE 74
+
+#ifndef __ASSEMBLY__
+
+#define EDD_EXT_FIXED_DISK_ACCESS (1 << 0)
+#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
+#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
+#define EDD_EXT_64BIT_EXTENSIONS (1 << 3)
+
+#define EDD_INFO_DMA_BOUNDRY_ERROR_TRANSPARENT (1 << 0)
+#define EDD_INFO_GEOMETRY_VALID (1 << 1)
+#define EDD_INFO_REMOVABLE (1 << 2)
+#define EDD_INFO_WRITE_VERIFY (1 << 3)
+#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION (1 << 4)
+#define EDD_INFO_LOCKABLE (1 << 5)
+#define EDD_INFO_NO_MEDIA_PRESENT (1 << 6)
+#define EDD_INFO_USE_INT13_FN50 (1 << 7)
+
+struct edd_device_params {
+ u16 length;
+ u16 info_flags;
+ u32 num_default_cylinders;
+ u32 num_default_heads;
+ u32 sectors_per_track;
+ u64 number_of_sectors;
+ u16 bytes_per_sector;
+ u32 dpte_ptr; /* 0xFFFFFFFF for our purposes */
+ u16 key; /* = 0xBEDD */
+ u8 device_path_info_length; /* = 44 */
+ u8 reserved2;
+ u16 reserved3;
+ u8 host_bus_type[4];
+ u8 interface_type[8];
+ union {
+ struct {
+ u16 base_address;
+ u16 reserved1;
+ u32 reserved2;
+ } __attribute__ ((packed)) isa;
+ struct {
+ u8 bus;
+ u8 slot;
+ u8 function;
+ u8 channel;
+ u32 reserved;
+ } __attribute__ ((packed)) pci;
+ /* pcix is same as pci */
+ struct {
+ u64 reserved;
+ } __attribute__ ((packed)) ibnd;
+ struct {
+ u64 reserved;
+ } __attribute__ ((packed)) xprs;
+ struct {
+ u64 reserved;
+ } __attribute__ ((packed)) htpt;
+ struct {
+ u64 reserved;
+ } __attribute__ ((packed)) unknown;
+ } interface_path;
+ union {
+ struct {
+ u8 device;
+ u8 reserved1;
+ u16 reserved2;
+ u32 reserved3;
+ u64 reserved4;
+ } __attribute__ ((packed)) ata;
+ struct {
+ u8 device;
+ u8 lun;
+ u8 reserved1;
+ u8 reserved2;
+ u32 reserved3;
+ u64 reserved4;
+ } __attribute__ ((packed)) atapi;
+ struct {
+ u16 id;
+ u64 lun;
+ u16 reserved1;
+ u32 reserved2;
+ } __attribute__ ((packed)) scsi;
+ struct {
+ u64 serial_number;
+ u64 reserved;
+ } __attribute__ ((packed)) usb;
+ struct {
+ u64 eui;
+ u64 reserved;
+ } __attribute__ ((packed)) i1394;
+ struct {
+ u64 wwid;
+ u64 lun;
+ } __attribute__ ((packed)) fibre;
+ struct {
+ u64 identity_tag;
+ u64 reserved;
+ } __attribute__ ((packed)) i2o;
+ struct {
+ u32 array_number;
+ u32 reserved1;
+ u64 reserved2;
+ } __attribute((packed)) raid;
+ struct {
+ u8 device;
+ u8 reserved1;
+ u16 reserved2;
+ u32 reserved3;
+ u64 reserved4;
+ } __attribute__ ((packed)) sata;
+ struct {
+ u64 reserved1;
+ u64 reserved2;
+ } __attribute__ ((packed)) unknown;
+ } device_path;
+ u8 reserved4;
+ u8 checksum;
+} __attribute__ ((packed));
+
+struct edd_info {
+ u8 device;
+ u8 version;
+ u16 interface_support;
+ struct edd_device_params params;
+} __attribute__ ((packed));
+
+extern struct edd_info edd[EDDNR];
+extern unsigned char eddnr;
+#endif /*!__ASSEMBLY__ */
+
+#endif /* _ASM_I386_EDD_H */
diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/include/asm-i386/setup.h linux-2.5-edd/include/asm-i386/setup.h
--- linux-2.5/include/asm-i386/setup.h Wed Oct 9 15:01:54 2002
+++ linux-2.5-edd/include/asm-i386/setup.h Wed Oct 9 14:55:28 2002
@@ -37,6 +37,8 @@
#define KERNEL_START (*(unsigned long *) (PARAM+0x214))
#define INITRD_START (*(unsigned long *) (PARAM+0x218))
#define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c))
+#define EDD_NR (*(unsigned char *) (PARAM+EDDNR))
+#define EDD_BUF ((struct edd_info *) (PARAM+EDDBUF))
#define COMMAND_LINE ((char *) (PARAM+2048))
#define COMMAND_LINE_SIZE 256

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:29    [W:0.125 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site