lkml.org 
[lkml]   [2002]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: tg3 and Netgear GA302T x 2 locks machine
David S. Miller wrote:
> From: Ben Greear <greearb@candelatech.com>
> Date: Thu, 03 Oct 2002 21:19:37 -0700
>
> Got my two new Netgear GA302t nics today. They seem to use the
> tg3 driver....
>
> I put them into the 64/66 slots on my Tyan dual amd motherboard..
> Running kernel 2.4.20-pre8
>
> You reported the other week problems with two Acenic's in
> this same machine right? The second Acenic wouldn't even probe
> properly. And the two Acenic's were identical.
>
> I see a pattern developing... :-)
>

Yep, one of my 64-bit PCI slots only seems to work with Intel NICs.
Go figure.

At any rate, I have 4 32-bit slots, and they seem to work, at
least long enough for the driver to puke messages and hard-lock my
machine ;)

If you think this NIC should work with the tg3, then I can change
them to a completely other machine, btw.

Ben

--
Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com>
President of Candela Technologies Inc http://www.candelatech.com
ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:29    [W:0.449 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site