Messages in this thread | | | Date | Sun, 27 Oct 2002 09:46:03 -0800 | From | Arthur Aldridge <> | Subject | RE: Problem with ACPI on Abit KT7,HPT370 (Work Around) |
| |
Well after posting I continued to play around and found working combinations.
It certainly seems to be an ACPI issue. BIOS defaults in the PNP/PCI Config screen are PNP OS = No, and all the PIRQ_#s are set to auto. With my setup that yields IDE = IRQ 14, USBs and Net = 10, Sound = 11, VGA = 9, HPT370 = 11 and ACPI = 11. If I explicitly set any of the IRQ in a manner in which the HPT370 doesn't end up sharing IRQ with the ACPI controller the system boots. The easiest way is to only explicitly set the HPT370 to IRQ 10. I don't know much about ACPI and don't know what the significance of sharing the ACPI controller's IRQ is but this doesn't seem to be an IRQ sharing issue as even with IDE =14, ACPI =11, and every other PCI device sharing IRQ 10 the kernel comes up with out issue. Also setting PNP OS either way doesn't seem to relevant.
>Dominik Geisel (dominik_at_geisel.info) Wrote: > >I tried 2.4.10-ac10 with your config and played around with all possible >BIOS settings...the problem persists. >Also, I am now quite sure it broke with BIOS version 3R.
>>On Mon, Oct 08, 2001 at 10:35:42PM +0200, Dominik Thinay wrote: >> with kernel 2.4.11-pre3-xfs + i2c CVS-patch + lmsensors it works fine on my >> system (Abit Bios KT7_49B0) >> CONFIG_PM=y >> CONFIG_ACPI=y >> CONFIG_ACPI_DEBUG=y >> CONFIG_ACPI_BUSMGR=y >> CONFIG_ACPI_SYS=y >> CONFIG_ACPI_CPU=y >> CONFIG_ACPI_BUTTON=y >> >> I remember disabled sth in the bios ...but i have forget ... :(
-- Arthur Aldridge Sun Certified Solaris Admin aj@yasashi.net
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |