Messages in this thread |  | | Date | Mon, 07 Jan 2002 16:43:47 +1100 | From | Dylan Egan <> | Subject | Re: 2.4.17 - hanging due to usb |
| |
>Can you not load the usb-storage driver, load the usbcore module, and >the USB host driver that you are using, and point hotplug to somewhere >else: > echo /bin/true > /proc/sys/kernel/hotplug > >Then plug in your device, and send the output of /proc/bus/usb/devices >to the list (and the linux-usb-devel list, which is a better place for >this :)
I only got this extra bit of infomation from the way you said for me to do it. When i loaded usbcore this time it said cant get major 180 for usb.... Ok i loaded it as you said it all went find but it never gave me anything when i went to do "cat /proc/bus/usb/devices". Also this is the most information i can get when it is initialzing the usb device(insmod usb-storage):
Using /lib/modules/2.4.17/kernel/drivers/usb/storage/usb-storage.o usb.c: registered new driver usb-storage scsi0: SCSI Emulation for USB Mass Storage devices usb-uhci.c: ENXIO 800000200, flags 0,urb ccaeb440, burb ccaeb4c0 usb-uhci.c: interrupt, status 3, frame #1758 usb.c USB disconnect on device 2 hub.c USB new device connect on bus3/2, assigned device number 3 Manufactuar: ScanLogic USBIDE Product: ScanLogic USBIDE usb-storage:host_reset() requested but not implemented scsi: device set offline - command error recover failed; host0 channel 0 id 0 lun 0
i had to write this out i hope its perfect to what it said
Regards,
Dylan
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |