Messages in this thread | | | Subject | IDE rescan => DISABLED, NO IRQ | From | Pallai Roland <> | Date | 23 Jan 2002 18:10:55 +0100 |
| |
I want to check my new kernel to see what changed about IDE hotswapping, but I've got this message just after the rescan request:
Jan 23 15:54:19 WishMaster hdi: probing with STATUS(0x50) instead of ALTSTATUS(0xff) Jan 23 15:54:19 WishMaster hdi: WDC WD153BA, ATA DISK drive Jan 23 15:54:19 WishMaster hdi: IRQ probe failed (0xfff83eb8) Jan 23 15:54:19 WishMaster hdj: probing with STATUS(0x50) instead of ALTSTATUS(0xff) Jan 23 15:54:19 WishMaster hdj: ST320423A, ATA DISK drive Jan 23 15:54:19 WishMaster hdj: IRQ probe failed (0xfff83eb8) Jan 23 15:54:19 WishMaster ide4: DISABLED, NO IRQ Jan 23 15:54:40 WishMaster hdi: ERROR, PORTS ALREADY IN USE Jan 23 15:54:40 WishMaster hdj: ERROR, PORTS ALREADY IN USE
the kernel say " ide4: ports already in use, skipping probe " and do nothing if I try to rescan once again
I've 5 IDE controllers (three on board and a PCI card), interrupts are assigned by the following order: CPU0 0: 448638 IO-APIC-edge timer 1: 518 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 14: 123503 IO-APIC-edge ide0 15: 21569 IO-APIC-edge ide1 16: 245384 IO-APIC-level ide2, ide3 17: 9538 IO-APIC-level aic7xxx 18: 4319591 IO-APIC-level ide4, eth0
kernel 2.4.18pre2, if you need other informations, tell me
-- DaP - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |