[lkml]   [2002]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[patch] amd athlon cooling on kt266/266a chipset
hi there!

a few month ago someone has posted a patch for enabling the disconneect
on STPGND detect function in the kt133/kt133a chipset. for those who don't
know what this does: it sets a bit in a register of the northbridge of the
chipset to enable the power saving modes of the athlon/duron/athlon xp
i did not found any patch which enables this function on an kt266/kt266a
board. so i modified this patch (
to support the kt266 and kt266a chipset to.

now i am looking for people to test the patch and repord, whether it works
allright on other computers than my computer (i tested this patch on an
epox 8kha+ whith an xp1600+).

if you want to test this patch:
1. first apply the patch
2. enable generel-setup -> acpi , acpi-bus-maager , prozessor
in the kernel config
3. add to the "append" line in /etc/lilo.conf the "amd_disconnect=yes"
statemand (or after reboot enter at the kernel-boot-prompt
4. build a knew kernel
5. report to me, whether you have problems ...

if the patch gets a good feedback, maybe it is something for the official
kernel tree ?


# Daniel Nofftz
# Sysadmin CIP-Pool Informatik
# University of Trier(Germany), Room V 103
# Mail:

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:15    [W:0.093 / U:7.204 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site