Messages in this thread | | | From | Norbert Preining <> | Date | Mon, 14 Jan 2002 09:10:28 +0100 | Subject | ide patch, 2.4.18, boot disk partition, hpt problems |
| |
Hi list, hi Andre!
I got the following problem with 2.4.18-preX and the current ide patch: linux boots normal to the place where the partition table should be shown, and there it hangs forever.
Here is the end of a kernel boot WITH the ide patch: Partition check: hda: hda1 hda2 hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 hdb12 hdb13 > hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 hde8 hde9 hde10 hde11 hde12 > hdf: And here it hangs, nothing more.
I have the following config vars set concerning IDE: [/usr/src/linux] grep _IDE .config CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y CONFIG_IDEDMA_ONLYDISK=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y CONFIG_IDEDMA_IVB=y CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_CD_NO_IDESCSI is not set
Here a dmesg of a boot from another kernel without ide-patches, but with the hpt patches FROM the ide patch, so ot must be something in another place of the ide patch:
Linux version 2.4.18pre2-packet (root@mandala) (gcc version 2.95.2 19991024 (release)) #5 Wed Jan 9 09:32:03 CET 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Kernel command line: BOOT_IMAGE=linux ro root=341 BOOT_FILE=/boot/image hdd=ide-scsi video=vesa:ypan ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1400.087 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2791.83 BogoMIPS Memory: 255640k/262080k available (1153k kernel code, 6056k reserved, 325k data, 224k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000 CPU: AMD Athlon(tm) processor stepping 04 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1400.0716 MHz. ..... host bus clock speed is 266.6803 MHz. cpu: 0, clocks: 2666803, slice: 1333401 CPU0<T0:2666800,T1:1333392,D:7,S:1333401,C:2666803> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:07.0 Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.15) Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A PCI: Found IRQ 5 for device 00:0c.0 PCI: Sharing IRQ 5 with 00:0a.0 Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA HPT370A: IDE controller on PCI bus 00 dev 70 PCI: Found IRQ 11 for device 00:0e.0 PCI: Sharing IRQ 11 with 00:09.0 HPT370A: chipset revision 4 HPT370A: not 100% native mode: will probe irqs later HPT370: using 33MHz PCI clock ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:DMA, hdh:pio hda: IBM-DTTA-350840, ATA DISK drive hdb: Maxtor 52049H4, ATA DISK drive hdc: TOSHIBA DVD-ROM SD-M1402, ATAPI CD/DVD-ROM drive hdd: Hewlett-Packard CD-Writer Plus 9100, ATAPI CD/DVD-ROM drive hde: IC35L040AVER07-0, ATA DISK drive hdf: IBM-DCAA-33610, ATA DISK drive hdg: IC35L040AVER07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xd400-0xd407,0xd802 on irq 11 ide3 at 0xdc00-0xdc07,0xe002 on irq 11 hda: 16514064 sectors (8455 MB) w/467KiB Cache, CHS=1027/255/63, UDMA(33) hdb: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(100) hde: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(44) hdf: 7056000 sectors (3613 MB) w/96KiB Cache, CHS=7000/16/63, DMA hdg: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(44) hdc: ATAPI 40X DVD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 hdb12 hdb13 > hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 hde8 hde9 hde10 hde11 hde12 > hdf: hdf1 hdf2 ...
Best wishes
Norbert
----------------------------------------------------------------------- Norbert Preining <preining@logic.at> University of Technology Vienna, Austria gpg DSA: 0x09C5B094 ----------------------------------------------------------------------- SPROSTON GREEN (n.)
The violent colour of one of Nigel Rees's jackets, worn when he thinks he's being elegant.
--- Douglas Adams, The Meaning of Liff - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |