lkml.org 
[lkml]   [2002]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: O(1) scheduler ver H6 - more straightforward timeslice macros
"James C. Owens" wrote:
>
> > -----Original Message-----
> > From: Matti Aarnio [mailto:matti.aarnio@zmailer.org]
> > Sent: Saturday, January 12, 2002 5:00 PM
> > To: James C. Owens
> > Cc: mingo@elte.hu; linux-kernel@vger.kernel.org
> > Subject: Re: O(1) scheduler ver H6 - more straightforward timeslice
> > macros
> >
> >
> > On Sat, Jan 12, 2002 at 02:16:08PM -0500, James C. Owens wrote:
> > > Ingo,
> > >
> > > I like the new scheduler. It seems like the timeslice
> > macros in sched.h
> > > could be more straighforward - i.e. instead of
> >
> > (I quote too much, but to illustriate the point...)
> >
> > > #define PRIO_TO_TIMESLICE(p) \
> > > (((
> > (MAX_USER_PRIO-1-USER_PRIO(p))*(MAX_TIMESLICE-MIN_TIMESLICE) + \
> > > MAX_USER_PRIO-1) / MAX_USER_PRIO) + MIN_TIMESLICE)
> > >
> > > #define RT_PRIO_TO_TIMESLICE(p) \
> > > ((( (MAX_RT_PRIO-(p)-1)*(MAX_TIMESLICE-MIN_TIMESLICE) + \
> > > MAX_RT_PRIO-1) / MAX_RT_PRIO) + MIN_TIMESLICE)
> > >
> > > why not
> > >
> > > #define PRIO_TO_TIMESLICE(p) \
> > > (MAX_TIMESLICE -
> > > (USER_PRIO(p)/(MAX_USER_PRIO-1))*(MAX_TIMESLICE-MIN_TIMESLICE))
> > >
> > > #define RT_PRIO_TO_TIMESLICE(p) \
> > > (MAX_TIMESLICE -
> > (p/(MAX_RT_PRIO-1))*(MAX_TIMESLICE-MIN_TIMESLICE))
> > >
> > >
> > > The second way seems simpler to me, and really illustrates
> > what you are
> > > doing in a more straightforward manner.
> >
> > Except that the math is INTEGER, not floating-point,
> > which means that this way you loose precission.
> >
> > You HAVE TO do multiplications first, only then (finally)
> > the division.
> >
> > Depending the value-spaces, small-enough value-spaces might be
> > turnable into table mappings. However that has lots of
> > dependencies
> > in hardware architecture, e.g. memory access speeds, cache
> > pollution,
> > speed of multiply/divide operations, etc.
> >
> > If dividers/multipliers are constants, and powers of two, the math
> > can happen with constant shifts, which are fast at all systems.
> > If not, things get rather complicated. (And thus a careless -1,
> > or lack of one, may be costly.)
> >
> [snip]
> > /Matti Aarnio
> >
>
> Point well made. How about
>
> #define PRIO_TO_TIMESLICE(p) \
> (MAX_TIMESLICE -
> ((USER_PRIO(p)*(MAX_TIMESLICE-MIN_TIMESLICE))/(MAX_USER_PRIO-1)))
>
> #define RT_PRIO_TO_TIMESLICE(p) \
> (MAX_TIMESLICE - ((p*(MAX_TIMESLICE-MIN_TIMESLICE))/(MAX_RT_PRIO-1)))
>
> If people agree with this, I'll submit a new diff (with the right options).
>
> Jim Owens

If performance is important here we could eliminate the "/" thusly:

#define SC 24 // Change as needed to get precision and fit in 32 bits
#define SC_USER_FACTOR
((MAX_TIMESLICE-MIN_TIMESLICE)<<SC)/(MAX_USER_PRIO-1) // a constant
#define PRIO_TO_TIMESLICE(p) \
(MAX_TIMESLICE - ((USER_PRIO(p) * (SC_USER_FACTOR))>>SC

To eliminate the ">>" one could go to SC=32 and then just take the high
32-bits of the mpy. Taking the high 32-bits of mpy (which gives
64-bits) requires asm, but SC_USER_FACTOR would be:
#define SC_USER_FACTOR \
(long)((long long) (MAX_TIMESLICE-MIN_TIMESLICE)<<SC)/(long
long)(MAX_USER_PRIO-1)

SC=32 can be used as long as
(MAX_TIMESLICE-MIN_TIMESLICE)<(MAX_USER_PRIO-1)
--
George george@mvista.com
High-res-timers: http://sourceforge.net/projects/high-res-timers/
Real time sched: http://sourceforge.net/projects/rtsched/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:15    [W:0.095 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site