lkml.org 
[lkml]   [2001]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectAha1542 problem
Hi,

unrelated to any other event, my aha1542b starts to fail. I find messages
like these below in my log. Unloading and reloading the driver helps, but
only for a short time.

HACC <4>aha1542.c: interrupt received, but no mail.
aha1542.c: Unable to abort command for target 0
aha1542.c: Trying device reset for target 0
HACC <4>aha1542.c: interrupt received, but no mail.
HACC <4>aha1542.c: interrupt received, but no mail.
aha1542.c: Unable to abort command for target 0
Sent BUS RESET to scsi host 0
aha1542.c: interrupt received, but no mail.
scsi: device set offline - not ready or command retry failed after host reset: host 0 channel 0 id 0 lun 0
st0: Error 2 (sugg. bt 0x0, driver bt 0x0, host bt 0x0).
scsi : 0 hosts left.

System: Dual P-200 MMX, Kernel 2.4.8-pre3 with ext3 patch.

/proc/interrupts:
CPU0 CPU1
0: 57555063 58669574 IO-APIC-edge timer
1: 0 2 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
3: 1 3 IO-APIC-edge serial
8: 26 30 IO-APIC-edge rtc
10: 339970 351627 IO-APIC-edge aha1542
17: 5557414 5562660 IO-APIC-level ide0
18: 13365797 13366581 IO-APIC-level eth0
NMI: 0 0
LOC: 116232016 116232731
ERR: 0
MIS: 0

/proc/scsi/scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: TANDBERG Model: TDC 4222 Rev: =07:
Type: Sequential-Access ANSI SCSI revision: 02


Thanks,
hjb
--
Pro-Linux - Germany's largest volunteer Linux support site
http://www.pro-linux.de/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:03    [W:0.057 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site