[lkml]   [2001]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: lpr to HP laserjet stalls
Tim Waugh wrote:
> On Tue, Sep 04, 2001 at 04:22:19PM +0300, Michael Ben-Gershon wrote:
> > I don't know what they mean (the printing itself was not affected) but
> > I guess it would be better to avoid modes which give such messages.
> They are normal, really, and are there to help debugging.
> > At the moment I am loading the module with:
> >
> > insmod parport
> > insmod parport_pc io=0x378,0xa800 irq=auto,auto dma=nofifo,nofifo
> So this is interrupt-driven printing but without using the ECP
> hardware. I wonder why CONFIG_PARPORT_PC_FIFO makes a difference. It
> shouldn't, really, and neither should building it as a module.

Building it as a module meant I didn't have to reboot for every time
I wanted to retest it with different parameters.

Michael Ben-Gershon
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:02    [W:3.879 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site