[lkml]   [2001]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: lpr to HP laserjet stalls
Am Dienstag 04 September 2001 10:50 schrieb Tim Waugh:
> On Tue, Sep 04, 2001 at 02:56:56AM +0200, Patrick Dreker wrote:
> > All of this vanished, when I replaced all occurrences of /dev/lp0 in my
> > printer configuration by /dev/par0. I has been working flawlessly since
> > then.
> crw-rw---- 1 root lp 6, 0 Aug 30 21:30 /dev/lp0
> crw------- 1 root root 6, 0 Aug 30 21:30 /dev/par0
> Are you sure you didn't also upgrade the kernel? ;-)
I must have been through approx. 20-30 Kernel Versions since that time
(including some -test, -pre and -ac versions), so I would not rule out that
possibility. Especially since I have not been able to reproduce this in the
last few hours, and I must say, that I have really tried to ;-)

> Tim.
> */

Patrick Dreker
> Is there anything else I can contribute?
The latitude and longtitude of the bios writers current position, and
a ballistic missile.
Alan Cox on
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:17    [W:0.071 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site