Messages in this thread |  | | From | safemode <> | Subject | ide-scsi driver trouble in ac15 | Date | Fri, 28 Sep 2001 00:07:37 -0400 |
| |
I'm not entirely sure if this is ac15's fault or the preempt patch acting up. But this is very ide-scsi centric so i'm leaning towards ac15. I burned a cd using my ide writer and it worked fine. Then i went to burn another and the drive went into an infinite reset loop. like this. SCSI bus is being reset for host 0 channel 0. scsi0 : channel 0 target 0 lun 0 request sense failed, performing reset.
reloading the modules does nothing but report this error. SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices scsi0 : channel 0 target 0 lun 0 request sense failed, performing reset. SCSI bus is being reset for host 0 channel 0.
Even though the modules were removed, the drive led is still blinking like it was writing. If anyone needs some more info i'll try and get it. the cdr did detect and work correctly at boot.
hardware: Promise ide controller : PDC20262: chipset revision 1 PDC20262: not 100% native mode: will probe irqs later PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. CDR: hde: CREATIVE CD-RW RW8438E, ATAPI CD/DVD-ROM drive SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: CREATIVE Model: CD-RW RW8438E Rev: FC03 Type: CD-ROM ANSI SCSI revision: 02 software: Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling linux-2.4.9-ac15-preempt-fix
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |