[lkml]   [2001]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.4.9: PDC20267 not working

On Monday 10 September 2001 03:26, Joe Fago wrote:

> PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode
> ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda: pio, hdb: pio
> ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc: pio, hdd: DMA
> hda: Maxtor 2B020H1, ATA DISK drive
> This is the only device attached to the controller. Any suggestions?

ASUS A7V with on-board PDC20265, kernel 2.4.9 with ACPI support - it hangs on
detection of the last drive (hde). I've disabled APM and ACPI altogether in
the kernel and now it works.
I didn't play with edge/level setting of interrupts.

best regards,
Rok Papež.
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:03    [W:0.047 / U:1.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site