lkml.org 
[lkml]   [2001]   [Aug]   [24]   [last100]  
 
/

24 Aug 2001

 
[New] re: socket problemDan Kegel
[New] From 2.2.19 to 2.4.8ac8 - serial console no longer works"J.Brown (Ender/Amigo)"
  Update Re: Kernel 2.4.9 and an AMD compile"Kingsley Foreman"
  Re: socket problemArnaldo Carvalho de Melo
[New] 3ware: no cards found in 2.2.19, cards found in 2.4.xBrian Strand
  Re: [patch] PCI64 + block zero-bounce highmem v11Jens Axboe
  Re: Will 2.6 require Python for any configuration ? (CML2)Denis Perchine
  Re: Will 2.6 require Python for any configuration ? (CML2)Matthias Andree
  Re: software raid does not do parallel reads under 2.4?Neil Brown
  [resent PATCH] Re: very slow parallel read performanceRoger Larsson
[New] What version of the kernel fixes these VM issues?"Anwar P"
  Re: UserlimitsArnaldo Carvalho de Melo
  Re: [PATCH] (comments requested) adding finer-grained timing to P ...Gabriel Paubert
[New] RE : "[Very-OT] Best Mobo to get for Linux 2.4.x"Brian Dushaw
  Re: Will 2.6 require Python for any configuration ? (CML2)Leonid Mamtchenkov
  Re: brlock_is_locked()?Jens Axboe
  Re: Upd: [PATCH NG] alloc_pages_limit & pages_minStephan von Krawczynski
  Re: python now required for kernel compile -- <grin>André Dahlqvist
  Re: 3ware: no cards found in 2.2.19, cards found in 2.4.xDavid Ford
  Re: yenta_socket hangs sager laptop in kernel 2.4.6-> PNPBIOS lif ...Gerd Knorr
[New] UserlimitsEmmanuel Varagnat
  Re: suggestions for new kernel hacking-HOWTOArnaldo Carvalho de Melo
  Re: SvV re: diald 0.99.4 and RHMike Jagdis
  Re: hardware checksummingHelge Hafting
[New] lance-modul:ping produces neighbour table overflow(Bruno Boettcher)
  Re: Linux 2.4.8-ac10Chris Meadors
  Re: source control?Gérard_Roudier
[New] Re: source control?"Samium Gromoff"
[New] Re: Linux 2.4.8-ac10Martin Knoblauch
  Re: sound crashes in 2.4"Chris Pockele"
[New] 3ware RAID1 sequential read speed slower than write speed (2.4.8- ...Yusuf Goolamabbas
[New] Re: sound crashes in 2.4"Samium Gromoff"
  Re: Will 2.6 require Python for any configuration ? (CML2)Jes Sorensen
  Re: Determining maximum partition size on a hard diskArnvid Karstad
  Re: scr_*() auditOlaf Hering
  Re: Upd: [PATCH NG] alloc_pages_limit & pages_minStephan von Krawczynski
  Re: macro conflictDavid Woodhouse
  Re: PROBLEM: Using Philips CDD3610 cd-writer crashes my system wi ...Erick Staal
[New] Re: source control?"Samium Gromoff"
  Re: macro conflictKeith Owens
  Re: macro conflictDavid Woodhouse
[New] Re: sound crashes in 2.4"Samium Gromoff"
[New] PROBLEM: Using Philips CDD3610 cd-writer crashes my system with e ...Marko van Dooren
  Re: source control?Alan Cox
  Re: What version of the kernel fixes these VM issues?Daniel Phillips
[New] Re: Determining maximum partition size on a hard diskPaal Chr Birkeland
  Re: Poor Performance for ethernet bondingAndi Kleen
[New] Re: Poor Performance for ethernet bondingAndi Kleen
  Re: 3ware RAID1 sequential read speed slower than write speed (2. ...David Rees
[New] creating new directories under /procChristian Widmer
[New] problem with includes: pc_keyb.hNico Schottelius
  Re: Will 2.6 require Python for any configuration ? (CML2)Mark Hahn
  Re: Poor Performance for ethernet bondingBen Greear
  Re: problem with includes: pc_keyb.hMartin Mares
  Re: [PATCH] const initdata.Alan Cox
  Re: Poor Performance for ethernet bondingMartin Josefsson
  Re: macro conflictBill Pringlemeir
  Re: suggestions for new kernel hacking-HOWTOPragnesh Sampat
  Re: [PATCH] const initdata.Anders Peter Fugmann
  Re: Will 2.6 require Python for any configuration ? (CML2)Tom Rini
  Re: 3ware: no cards found in 2.2.19, cards found in 2.4.xDavid Ford
  Re: [PATCH] const initdata.Anders Peter Fugmann
  Re: Poor Performance for ethernet bondingBen Greear
  Re: File System LimitationsWalter Hofmann
  Re: Will 2.6 require Python for any configuration ? (CML2)Jes Sorensen
  Re: creating new directories under /procAlexander Viro
[New] [OT] CPU temperature controlPadraig Brady
  Re: [OT] CPU temperature controlDave Jones
  Re: software raid does not do parallel reads under 2.4?Wilfried Weissmann
  is there sound device limit?Donour Sizemore
  Re: Will 2.6 require Python for any configuration ? (CML2)Jes Sorensen
  Re: Poor Performance for ethernet bondingBen Greear
  Re: [OT] CPU temperature controlRussell King
[New] [OT] Howl of soul..."Samium Gromoff"
  Re: Will 2.6 require Python for any configuration ? (CML2)Tom Rini
  Re: [resent PATCH] Re: very slow parallel read performanceRik van Riel
  Re: Poor Performance for ethernet bondingSergey Ostrovsky
  Re: Poor Performance for ethernet bondingAndi Kleen
  Re: source control?Larry McVoy
  Re: File System LimitationsLuigi Genoni
[New] How can change Initial window (cwnd)Kim Yong Il
  Re: What version of the kernel fixes these VM issues?Nicolas Pitre
[New] Re: Linux 2.4.8-ac10Andrzej Krzysztofowicz
  Re: What version of the kernel fixes these VM issues?Nicolas Pitre
[New] iptables limit and SSHred0x
  Re: PROBLEM: usb not working with 2.4.8-ac8Johannes Erdfelt
 Doug Ledford
  Re: macro conflictDavid Woodhouse
  Re: source control?Florian Weimer
  Re: macro conflict(David Wagner)
  Re: sound crashes in 2.4Chris Pockele
[New]Stefan Westerfeld
[New] Re: source control?"Samium Gromoff"
  Re: [PATCH] (comments requested) adding finer-grained timing to PPC"Albert D. Cahalan"
  Re: Poor Performance for ethernet bondingThomas Davis
[New] 2.4 broken on 486SXRoss Vandegrift
  Re: What version of the kernel fixes these VM issues?Nicolas Pitre
  Re: macro conflictBill Pringlemeir
[New] 2.4.9 based x86-64 kernel snapshot released.Andi Kleen
  Re: [resent PATCH] Re: very slow parallel read performanceRik van Riel
  Re: software raid does not do parallel reads under 2.4?Daryll Strauss
[New] Re: Linux 2.4.8-ac10Chris Meadors
  Re: [resent PATCH] Re: very slow parallel read performanceRoger Larsson
  Re: [OT] Howl of soul...Justin Guyett
  Re: What version of the kernel fixes these VM issues?Mark Frazer
  Re: [OT] Howl of soul...Alan Cox
  Re: What version of the kernel fixes these VM issues?Daniel Phillips
  Re: 2.4 broken on 486SX"Richard B. Johnson"
  Re: What version of the kernel fixes these VM issues?Daniel Phillips
  Re: [resent PATCH] Re: very slow parallel read performanceRik van Riel
  Re: 2.4 broken on 486SXRoss Vandegrift
  Re: [resent PATCH] Re: very slow parallel read performanceDaniel Phillips
  Re: Will 2.6 require Python for any configuration ? (CML2)David Lang
  Re: [resent PATCH] Re: very slow parallel read performanceDaniel Phillips
[New] Is it bad to have lots of sleeping tasks?"Donald Dade"
  Re: Is it bad to have lots of sleeping tasks?Kurt Garloff
  Re: software raid does not do parallel reads under 2.4?( Marc) (A.) (Lehmann )>
  Re: [IDEA+RFC] Possible solution for min()/max() warBrad Chapman
  Re: LKML on Majordomo2 ?Matti Aarnio
  Re: Is it bad to have lots of sleeping tasks?"Hua Zhong"
  Re: [OT] Howl of soul...Paul Jakma
[New] reiserfs failurePavel Machek
[New] [IDEA+RFC] Possible solution for min()/max() warBrad Chapman
[New] LKML on Majordomo2 ?Sandip Bhattacharya
  Re: [resent PATCH] Re: very slow parallel read performanceRik van Riel
  Re: Poor Performance for ethernet bondingBen Greear
  Re: [resent PATCH] Re: very slow parallel read performance( Marc) (A.) (Lehmann )>
  Re: [resent PATCH] Re: very slow parallel read performanceDaniel Phillips
[New] Re: [IDEA+RFC] Possible solution for min()/max() warBrad Chapman
[New] Linux 2.4.8-ac11Alan Cox
  Re: Is it bad to have lots of sleeping tasks?Alan Cox
  Re: [IDEA+RFC] Possible solution for min()/max() war"David S. Miller"
  Re: 2.4 broken on 486SXBrian Gerst
  Re: [resent PATCH] Re: very slow parallel read performanceRik van Riel
  Re: software raid does not do parallel reads under 2.4?( Marc) (A.) (Lehmann )>
  Re: macro conflictRoman Zippel
  Re: oops in 3c59x driverWichert Akkerman
[New] Linux 0.12"Charles Stephens"
[New] Re: [IDEA+RFC] Possible solution for min()/max() warBrad Chapman
  Re: Digest services anywhere and Re: LKML on Majordomo2 ?Alan Cox
  Re: Digest services anywhere and Re: LKML on Majordomo2 ?Rik van Riel
  Re: Is it bad to have lots of sleeping tasks?Alan Cox
[New] [PATCH] const initdata, part 2.Dave Jones
  Re: PROBLEM: usb not working with 2.4.8-ac8Pete Zaitcev
[New] [PATCH][RFC] simpler __alloc_pages{_limit}Roger Larsson
 Daniel Phillips
[New] 2.4.8: insmod ipx.o failedBoris Pisarcik
  Digest services anywhere and Re: LKML on Majordomo2 ?Sandip Bhattacharya
  Re: [IDEA+RFC] Possible solution for min()/max() warAlexander Viro
  Re: [IDEA+RFC] Possible solution for min()/max() warBrad Chapman
  Re: [IDEA+RFC] Possible solution for min()/max() warBen LaHaise
  Re: PROBLEM: usb not working with 2.4.8-ac8Johannes Erdfelt
  Re: [IDEA+RFC] Possible solution for min()/max() warBrad Chapman
  Re: [resent PATCH] Re: very slow parallel read performanceGérard_Roudier
  Re: Will 2.6 require Python for any configuration ? (CML2)Michael Peddemors
  Re: [resent PATCH] Re: very slow parallel read performance( Marc) (A.) (Lehmann )>
  Re: [resent PATCH] Re: very slow parallel read performanceRik van Riel
  Re: [OT] Howl of soul...Mike Castle
[New] Re: A bug in the new aic7xxx.o driver in kernel 2.4.7"Justin T. Gibbs"
  Re: 2.4 broken on 486SXSteve Kieu
  Re: [resent PATCH] Re: very slow parallel read performance"Craig I. Hagan"
  Re: [resent PATCH] Re: very slow parallel read performanceDaniel Phillips
  Re: [IDEA+RFC] Possible solution for min()/max() war"David S. Miller"
  Re: [IDEA+RFC] Possible solution for min()/max() warBrad Chapman
  Re: What version of the kernel fixes these VM issues?Nicolas Pitre
[New] oops in 3c59x driverWichert Akkerman
  Re: oops in 3c59x driverAlan Cox
  Re: [IDEA+RFC] Possible solution for min()/max() warBrad Chapman
[New] No Subjectabraxas2
  Re: [IDEA+RFC] Possible solution for min()/max() warAlexander Viro
 "Dr. Kelsey Hudson"
  Re: What version of the kernel fixes these VM issues?Daniel Phillips
  Re: Will 2.6 require Python for any configuration ? (CML2)Denis Perchine
  Re: source control?Gérard_Roudier
[New] Poor Performance for ethernet bondingBernhard Busch
  Re: Swap size for a machine with 2GB of memory(Rogier Wolff)
  Re: Upd: [PATCH NG] alloc_pages_limit & pages_minRoger Larsson
  Re: brlock_is_locked()?Brad Chapman
  Re: source control?Florian Weimer
  Re: Is it bad to have lots of sleeping tasks?Alan Cox
  Re: macro conflict"Richard B. Johnson"
  Re: Will 2.6 require Python for any configuration ? (CML2)"Ryan W. Maple"
  Re: 3ware: no cards found in 2.2.19, cards found in 2.4.xBrian Strand
  Re: macro conflictAlex Bligh - linux-kernel
[New] ISSUE: DFE530-TX REV-A3-1 times out on transmitDavid Schmitt
  Re: [resent PATCH] Re: very slow parallel read performance( Marc) (A.) (Lehmann )>
  Re: [resent PATCH] Re: very slow parallel read performanceRik van Riel
  Re: [OT] Howl of soul...David Huen
[New] test please ignore... <[email protected] ...
  Re: [resent PATCH] Re: very slow parallel read performanceGérard_Roudier
  Re: [resent PATCH] Re: very slow parallel read performanceRik van Riel
  Re: [resent PATCH] Re: very slow parallel read performanceDaniel Phillips
  Re: [IDEA+RFC] Possible solution for min()/max() warAlexander Viro
\
 
  \ /
  Last update: 2020-07-13 23:38    [0.136 seconds]
©2004-2020 Jasper Spaans