[lkml]   [2001]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject2.4.8-ac7: all serial ports not setup
I am using 2.4.8-ac7 on a Dual P3@450Mhz. The machine has two serial
ports. ttyS0 & ttyS2 are covered by the first with ttyS1 & ttyS3 covered
by the second. Now typically in /proc/interrupts only one serial port is
configured. The IRQs 3 & 4 are shared by the two ports. Its not consistent
which one gets which IRQ. Sometimes the first has 3 and the second 4.
Today the situation is reversed. This ofcourse is wreaking havoc on
setting my pilot for synchronization.

Is there a options that I failed to select while configuring the kernel?
Do I need to add an option to the boot via lilo?

I will do an idiot check by checking the bios.


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:57    [W:0.119 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site