[lkml]   [2001]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: aic7xxx errors with 2.4.8-ac7 on 440gx mobo
On Mon, Aug 20, 2001 at 11:37:33AM +0100, Alan Cox wrote:

> > > With 2.4.8-ac7, I get SCSI errors and the kernel fails to boot. If I
> > > compile with APIC enabled and APIC on UP also enabled, it boots
> > > cleanly
> >
> > I'm getting similair errors on 2.4.8-ac7 on my P2B-S motherboard using
> > the NEW AIC7xxx driver, the old isn't experiencing these problems. Further
> > i've been getting these errors since 2.4.3.
> There is a known BIOS irq routing table problem with a large number of Intel
> BIOS boards with onboard adaptec controllers. The fact that making it use
> the io-apic works suggest this is the same thing.

It's an ASUS P2B-S board with a Award Bios, flashed to the latest revision that
is available from ASUS

Cliff Albert | RIPE: CA3348-RIPE | | 6BONE: CA2-6BONE | icq 18461740
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:57    [W:0.123 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site