lkml.org 
[lkml]   [2001]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: aic7xxx errors with 2.4.8-ac7 on 440gx mobo
Date
From
> > With 2.4.8-ac7, I get SCSI errors and the kernel fails to boot. If I
> > compile with APIC enabled and APIC on UP also enabled, it boots
> > cleanly
>
> I'm getting similair errors on 2.4.8-ac7 on my P2B-S motherboard using
> the NEW AIC7xxx driver, the old isn't experiencing these problems. Further
> i've been getting these errors since 2.4.3.

There is a known BIOS irq routing table problem with a large number of Intel
BIOS boards with onboard adaptec controllers. The fact that making it use
the io-apic works suggest this is the same thing.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:57    [W:2.364 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site