lkml.org 
[lkml]   [2001]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectSystem Freeze after booting the kernel
Date
--->My Hardware:
P200, 128 Meg Ram, 128 KB Cache on a SuperMicro Board.
Seagate IDE Drive with 13Gig


--->Detailed Report
[1.] Linux freezes after Uncompressing Linux... OK, booting the kernel (no
numlock posssible)

[2.] Wheter I boot with initrd or without, with incompiled reiserfs or as
module or in the initrd I've tried everything
the system freezes after the above given line. I've the same system as
desktop system (the problem occurs on the 'server')
which works fine (Celeron 400 on a Siemens Board with BX440 Chipset, SCSI,
197 Meg RAM)

So what can I do?

[4.] Kernel version (from /proc/version):
!!!!!!! Bootet with an other Kernel!!!!!!! as I can't boot with the 2.4.9
Linux version 2.4.4-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315
(Su1
[7.]
SuSE 7.2 i386

[7.1.]
Gnu C 2.95.3
Gnu make 3.79.1
binutils 2.10.91.0.4
util-linux 2.11b
mount 2.11b
modutils 2.4.5
e2fsprogs 1.19
reiserfsprogs 3.x.0j
pcmcia-cs 3.1.25
PPP 2.4.0
isdn4k-utils 3.1pre1a
Linux C Library x 1 root root 1343073 May 11 16:50
/lib/libc6
Dynamic linker (ldd) 2.2.2
Procps 2.0.7
Net-tools 1.60
Kbd 1.04
Sh-utils 2.0

[7.2.]

processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 2
model name : Pentium 75 - 200
stepping : 12
cpu MHz : 199.433
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8
bogomips : 398.13

[7.3.]

server1:/usr/src/linux/scripts # cat /proc/modules
ppp_async 6480 0 (autoclean) (unused)
ppp_generic 14416 0 (autoclean) [ppp_async]
nfsd 67280 4 (autoclean)
ipv6 126272 -1 (autoclean)
tulip 37184 2 (autoclean)
reiserfs 156432 1


[7.4.]

00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
00100000-002327d1 : Kernel code
002327d2-0031bdcb : Kernel data
80000000-807fffff : PCI device 5333:8811
febffe00-febffeff : PCI device 11ad:0002
febffe00-febffeff : tulip
febfff80-febfffff : PCI device 1011:0009
febfff80-febfffff : tulip
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
fffe0000-ffffffff : reserved
server1:/usr/src/linux/scripts # cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
e800-e8ff : PCI device 11ad:0002
e800-e8ff : tulip
ec80-ecff : PCI device 1011:0009
ec80-ecff : tulip
ffa0-ffaf : PCI device 8086:7010
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
[7.5.]

00:00.0 Host bridge: Intel Corporation 430HX - 82439HX TXC [Triton II] (rev
03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Ste-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbor-
Latency: 32



00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
(rev)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Ste-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbor-
Latency: 0



00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
()
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Ste-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbor-
Latency: 32

Region 4: I/O ports at ffa0 [size=16]



00:11.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)

Subsystem: Kingston Technologies: Unknown device f002

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Ste-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbor-
Latency: 64

Interrupt: pin A routed to IRQ 9

Region 0: I/O ports at e800 [size=256]

Region 1: Memory at febffe00 (32-bit, non-prefetchable) [size=256]

Expansion ROM at feb40000 [disabled] [size=256K]


00:12.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
(prog-if)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Ste-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbor-
Interrupt: pin A routed to IRQ 11

Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 7f000000 [disabled] [size=64K]


00:13.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
[Faste)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Ste-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbor-
Latency: 64 (5000ns min, 10000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10

Region 0: I/O ports at ec80 [size=128]

Region 1: Memory at febfff80 (32-bit, non-prefetchable) [size=128]

Expansion ROM at feb80000 [disabled] [size=256K]



[7.7.] I think it is a standard system it worked over 4 years now :)
I've made a memory check which has brought no relevant results :(

Salutations Thomas Hoppe

P.s. I've tried no other kernels before, just the SuSE standard 2.4.4 Kernel,
which still works.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:57    [from the cache]
©2003-2011 Jasper Spaans