Messages in this thread |  | | Subject | Re: 4.7GB DVD-RAM geometry wrong? | Date | Fri, 17 Aug 2001 01:26:12 +0900 | From | Hisaaki Shibata <> |
| |
Sorry for too much frequent report.
With CVS UDF driver source tree from http://sourceforge.net/cvs/ and 2.4.9-pre4 seems almost the same result below...
It can not grow up from 37% disk usage...
> > So could you reproduce with latest -ac or Linus kernel + CVS UDF? > > At first, I tried it with 2.4.9-pre4 and udf-0.9.4.1. > I did not get segv nor Oops with them. > > But it seems bad yet. > > My operations are here. > # mkudf /dev/hdb > # mount -t udf /dev/hdb /mnt/floppy/ > # cp -auv ~/dir /mnt/floppy/ 1> /tmp/cp.log 2> /tmp/cp.log & > > "cp" seems good until following "df" point. > /dev/hdb 4470016 1639798 2830218 37% /mnt/floppy > > After that point, "tail -f /tmp/cp.log" shows "cp going :-)" and > my DVD-RAM driveseeks like working good. > But result of "df" command is not change. > (it shows 37% forever...) > > "df -i" shows > /dev/hdb 1440735 25626 1415109 2% /mnt/floppy > > tails of dmesg are; > UDF-fs INFO UDF 0.9.4.1-rw (2001/06/13) Mounting volume '', timestamp 2001/08/16 21:54 (121c) > hdb: irq timeout: status=0xd0 { Busy } > hdb: ATAPI reset complete > hdb: irq timeout: status=0xd0 { Busy } > hdb: ATAPI reset complete > hdb: irq timeout: status=0xd0 { Busy } > hdb: ATAPI reset complete > hdb: irq timeout: status=0xd0 { Busy } > hdb: ATAPI reset complete > hdb: irq timeout: status=0xd0 { Busy } > hdb: ATAPI reset complete > > I will try with CVS udf patch and will report it.
Thanks.
-- WWWWW shibata@luky.org |O-O| Hisaaki Shibata @ Fukuoka, JAPAN 0(mmm)0 IRC: #luky ~ http://his.luky.org/ http://hoop.euqset.org/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |