[lkml]   [2001]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.4.8 aic7xxx -- continuous bus resets
IIRC, the fix for this in my situation was due to the pci irq routing on 
that particular motherboard and using noapic solved it.

Has the irq routing been fixed to date?


Justin T. Gibbs wrote:

>>I thought I'd look at the 2.4.8 kernel while I figure out what's
>>wrong with my 2.2.18 installation. The kernel loading gets stuck with
>>errors from the aic7xxx driver, which keeps timeing out querying the
>>bus looking for non-existant drives, and when it finaly tries to
>>query a drive that exists it claims to see bus errors. End result is
>>that Linux 2.4.8 never mounts any drives or finishes loading.
>>The system is an IBM 704 with a built in adaptec aic-7880U
>>controller, with two drives on first scsi buss.
>>2.2.18 has no problems with the adaptec controllers, but has other
>>issues, which seem to be timer related.
>2.4.9 has the latest aic7xxx driver in it. Can you see if that changes
>things for you? If not, can you hook up a serial console to the machine
>and provide all of the messages from an aic7xxx=verbose boot?

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:57    [W:0.093 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site