Messages in this thread | | | From | Andrzej Krzysztofowicz <> | Subject | Re: 3c905b works with 10bt hub - not with 10/100 switch | Date | Tue, 14 Aug 2001 12:53:53 +0200 (MET DST) |
| |
Aaron Lehmann wrote: > On Tue, Aug 14, 2001 at 02:14:45AM -0700, Aaron Lehmann wrote: > > I've been having major problems on my network as of today. > > I seem to have solved this problem. > > I put in a 3c595 - same problem. > > Luckily, I had the persistance to try another card. I chose to try > Client's eth0 as Server's eth2. Well, it worked. > > I hope this network setup will work on a switch for longer than the > 3c905b did.
Did you check the board's NVRAM setting for media type ? AFAIR changing Auto/Manual was related with this problem.
But I hit it about three years ago...
Andrzej -- ======================================================================= Andrzej M. Krzysztofowicz ankry@mif.pg.gda.pl phone (48)(58) 347 14 61 Faculty of Applied Phys. & Math., Technical University of Gdansk - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |