lkml.org 
[lkml]   [2001]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRAMDisk Blues

Hello,

I'm trying to boot a Linux system that has the following configuration:
- 32MB of Flash (IDE Flash Drive), where a kernel image and a compressed
root filesystem image are stored.
- 256MB of RAM, 128MB of which will be used as a RAMDisk (believe me, this
is cheaper than 128MB Flash + 128MB RAM ... :).

After looking for information on how to do that on the 'Net and in the
Documentation/ directory of the kernel src, I've been able make the Flash
Drive bootable. Unfortunately, it's bootable, but it doesn't boot
successfully ... :(

What I tried:
- Compressed the image I used to boot the system from a regular IDE HD to
a file called rd_image.gz (~20MB compressed), and copied it to the IDE
Flash Drive.
- Compiled a 2.4.6 kernel with RAMDisk and initrd support built-in, and
then copied it to the IDE Flash Drive.
- Ran LILO with the following config. file (based on the doc. I found so
far):

boot=/dev/hda # The FlashDrive device
install=/boot/boot.b
map=/boot/map
append="ramdisk_size=131072 initrd=rd_image.gz"
vga=normal
default=Linux
delay=5
image=/boot/vmlinuz
initrd=/boot/rd_image.gz
root=/dev/ram0
label=Linux
read-only

LILO completes the operation without problems (no errors). However, when I
boot the system from the FlashDrive, this is the output I get:

LILO Loading Linux ......................................................
..............................................

That's it!! The system hangs at this point (it really hangs, to the point
that the "soft" power on/off doesn't work anymore, and I have to turn off
the system from the back in order to reboot it).

What am I doing wrong?? Is my RAMDisk image too big (I thought there was
no limit, as long as you had enough RAM ...)?? Does anyone here know a
good resource on the 'Net where I can find more detailed information about
creating a RAMDisk-based Linux system that boots from a device other than
a floppy disk?? Most of the docs I found were related to boot / rescue /
utility floppies, so I don't know whether this is the right way to do it
or not ...

Any help would be appreciated.

Later,
Ivan

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:57    [W:1.580 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site