lkml.org 
[lkml]   [2001]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.4.6: eepro100 does not survive warm boot
Hi,

Apparently, the card is unaccessible after warm reboot.
It should be a PCI initialization problem.
What lspci shows after the warm reboot?

Andrey

On Wed, Jul 11, 2001 at 10:47:35AM +0200, Stefan Hoffmeister wrote:
> For testing purposes, I am running a stock 2.4.6 kernel on a Sony VAIO
> Z600 NE notebook (Sony Z505 JS in the US).
>
> On a cold boot, I get this information in dmesg:
>
> >eth0: OEM i82557/i82558 10/100 Ethernet, 08:00:46:07:49:99, IRQ 9.
> > Receiver lock-up bug exists -- enabling work-around.
> > Board assembly 100001-001, Physical connectors present: RJ45
[snip]
>
> With the exact same kernel, after a warm boot ('reboot'), the picture
> changes to
>
> >eth0: Invalid EEPROM checksum 0xff00, check settings before activating this device!
> >eth0: OEM i82557/i82558 10/100 Ethernet, FF:FF:FF:FF:FF:FF, IRQ 9.
> > Board assembly ffffff-255, Physical connectors present: RJ45 BNC AUI MII
> > Primary interface chip unknown-15 PHY #31.
> > Secondary interface chip i82555.
> >Self test failed, status ffffffff:
> > Failure to initialize the i82557.
> > Verify that the card is a bus-master capable slot.
>
>
> Result: The network essentially is dead; I cannot make HTTP requests to a
> server on the LAN, for instance. Shut down the system and go through a
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:56    [W:0.032 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site