lkml.org 
[lkml]   [2001]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[OOPS] 245ac7 - ncr53c8xx && reiserfs
Date
Hi all,

I get some problems w/ 2.4.5-ac7, ncr53c8xx w/ 2.4.4-ac18 works fine.

I gave a small looked on problem ..
the problem apparently is w/ ncr53c8xx driver ( who accuses timeout ), and make reiserfs call BUG() :

please somebody debug this, I have no time :-((

prints.c:332
void reiserfs_panic (struct super_block * sb, const char * fmt, ...)
{
#ifdef __KERNEL__
show_reiserfs_locks() ;
#endif
do_reiserfs_warning;
printk ("%s", error_buf);
BUG ();
...

journal.c:729
if (!buffer_uptodate(tbh)) {
reiserfs_panic(s, "journal-601, buffer write failed\n") ;
}

OOPS 1:

ksymoops 2.4.1 on i686 2.4.5-14tlsmp. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.5-14tlsmp/ (default)
-m /usr/src/linux/System.map (default)

Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.

<1>Unable to handle kernel paging request at virtual address e0c12da7
c022467c
*pde = 1ee33067
Oops: 0000
CPU: 1
EIP: 0010:[<c022467c>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010297
eax: e0c12da7 ebx: ffffffff ecx: e0c12da7 edx: fffffffe
esi: ffffffff edi: dcce6182 ebp: c8c65ef4 esp: c8c65eb8
ds: 0018 es: 0018 ss: 0018
Process cat (pid: 18237, stackpage=c8c65000)
Stack: 00000002 dcce6180 d8c6fe00 ffffffff dcce6171 d8c6fe00
0000000d 0804daf4
c8c65f04 c0126116 c8e297a0 dfd926e0 0000004e 00000001
00000000 c8c65f08
c0224880 dcce6180 c022e997 c8c65f1c c8c65f3c c010834b
dcce6180 c022e994
Call Trace: [<c0126116>] [<c0224880>] [<c010834b>] [<e0c12da7>] [<c0157111>]
[<c0154efc>] [<c012732e>] [<c013589a>] [<c01070d7>]
Code: 80 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 89 c6 8b 45 fc a8

>>EIP; c022467c <netlink_post+b70/2acc> <=====
Trace; c0126116 <get_unmapped_area+12a/35c>
Trace; c0224880 <netlink_post+d74/2acc>
Trace; c010834b <__read_lock_failed+24eb/25f0>
Trace; e0c12da7 <END_OF_CODE+e8740/????>
Trace; c0157111 <remove_proc_entry+1cc1/2940>
Trace; c0154efc <kiobuf_wait_for_io+7ea8/8224>
Trace; c012732e <truncate_inode_pages+d2/128>
Trace; c013589a <do_lseek+8c2/ac4>
Trace; c01070d7 <__read_lock_failed+1277/25f0>
Code; c022467c <netlink_post+b70/2acc>
00000000 <_EIP>:
Code; c022467c <netlink_post+b70/2acc> <=====
0: 80 38 00 cmpb $0x0,(%eax) <=====
Code; c022467f <netlink_post+b73/2acc>
3: 74 07 je c <_EIP+0xc> c0224688 <netlink_post+b7c/2acc>
Code; c0224681 <netlink_post+b75/2acc>
5: 40 inc %eax
Code; c0224682 <netlink_post+b76/2acc>
6: 4a dec %edx
Code; c0224683 <netlink_post+b77/2acc>
7: 83 fa ff cmp $0xffffffff,%edx
Code; c0224686 <netlink_post+b7a/2acc>
a: 75 f4 jne 0 <_EIP>
Code; c0224688 <netlink_post+b7c/2acc>
c: 29 c8 sub %ecx,%eax
Code; c022468a <netlink_post+b7e/2acc>
e: 89 c6 mov %eax,%esi
Code; c022468c <netlink_post+b80/2acc>
10: 8b 45 fc mov 0xfffffffc(%ebp),%eax
Code; c022468f <netlink_post+b83/2acc>
13: a8 00 test $0x0,%al


OOPS 2:

ksymoops 2.4.1 on i686 2.4.5-14tlsmp. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.5-14tlsmp/ (default)
-m /usr/src/linux/System.map (default)

Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.

cpu: 0, clocks: 997304, slice: 332434
cpu: 1, clocks: 997304, slice: 332434
kernel BUG at prints.c:332!
invalid operand: 0000
CPU: 1
EIP: 0010:[<c01721e0>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010286
eax: 0000001c ebx: c02e8100 ecx: c0285d40 edx: 00003dac
esi: d6e0fd6c edi: c02e8500 ebp: 00000000 esp: d6e0fd30
ds: 0018 es: 0018 ss: 0018
Process cat (pid: 4140, stackpage=d6e0f000)
Stack: c024c418 0000014c 00000000 e4ab30bc dfba4000 d6e0fd88 c02e8500 dfba4000
d6e0fd5c d6e0fd58 d6e0e000 00000000 c017d726 dfba4000 c024e340 00000000
00000002 dfba4000 e4ab30bc 00000003 00000004 00000000 d6fb2980 c017dc1d
Call Trace: [<e4ab30bc>] [<c017d726>] [<e4ab30bc>] [<c017dc1d>] [<e4ab30bc>]
[<e4ab30bc>] [<e4ab30fc>] [<c017f0b4>] [<c0181815>] [<e4ab30bc>] [<c017d075>]
[<e4ab3000>] [<c017fb2d>] [<c0177922>] [<c0169ed5>] [<e4ab3000>] [<e4ab30bc>]
[<e4abc3bc>] [<e4ad006c>] [<c017fd6a>] [<c016a20b>] [<c014a861>] [<c014c07a>]
[<c01284b2>] [<c012858b>] [<c01284c0>] [<c01352f6>] [<c0106f67>]
Code: 0f 0b 83 c4 08 83 7c 24 2c 00 74 08 8b 44 24 2c 80 48 28 01

>>EIP; c01721e0 <load_nls_default+111b8/272cc> <=====
Trace; e4ab30bc <END_OF_CODE+3f88a55/????>
Trace; c017d726 <load_nls_default+1c6fe/272cc>
Trace; e4ab30bc <END_OF_CODE+3f88a55/????>
Trace; c017dc1d <load_nls_default+1cbf5/272cc>
Trace; e4ab30bc <END_OF_CODE+3f88a55/????>
Trace; e4ab30bc <END_OF_CODE+3f88a55/????>
Trace; e4ab30fc <END_OF_CODE+3f88a95/????>
Trace; c017f0b4 <load_nls_default+1e08c/272cc>
Trace; c0181815 <load_nls_default+207ed/272cc>
Trace; e4ab30bc <END_OF_CODE+3f88a55/????>
Trace; c017d075 <load_nls_default+1c04d/272cc>
Trace; e4ab3000 <END_OF_CODE+3f88999/????>
Trace; c017fb2d <load_nls_default+1eb05/272cc>
Trace; c0177922 <load_nls_default+168fa/272cc>
Trace; c0169ed5 <load_nls_default+8ead/272cc>
Trace; e4ab3000 <END_OF_CODE+3f88999/????>
Trace; e4ab30bc <END_OF_CODE+3f88a55/????>
Trace; e4abc3bc <END_OF_CODE+3f91d55/????>
Trace; e4ad006c <END_OF_CODE+3fa5a05/????>
Trace; c017fd6a <load_nls_default+1ed42/272cc>
Trace; c016a20b <load_nls_default+91e3/272cc>
Trace; c014a861 <__mark_inode_dirty+2d/948>
Trace; c014c07a <update_atime+8e/3c4>
Trace; c01284b2 <do_generic_file_read+512/588>
Trace; c012858b <generic_file_read+63/45c>
Trace; c01284c0 <do_generic_file_read+520/588>
Trace; c01352f6 <do_lseek+31e/ac4>
Trace; c0106f67 <__read_lock_failed+1107/25f0>
Code; c01721e0 <load_nls_default+111b8/272cc>
00000000 <_EIP>:
Code; c01721e0 <load_nls_default+111b8/272cc> <=====
0: 0f 0b ud2a <=====
Code; c01721e2 <load_nls_default+111ba/272cc>
2: 83 c4 08 add $0x8,%esp
Code; c01721e5 <load_nls_default+111bd/272cc>
5: 83 7c 24 2c 00 cmpl $0x0,0x2c(%esp,1)
Code; c01721ea <load_nls_default+111c2/272cc>
a: 74 08 je 14 <_EIP+0x14> c01721f4 <load_nls_default+111cc/272cc>
Code; c01721ec <load_nls_default+111c4/272cc>
c: 8b 44 24 2c mov 0x2c(%esp,1),%eax
Code; c01721f0 <load_nls_default+111c8/272cc>
10: 80 48 28 01 orb $0x1,0x28(%eax)

kernel BUG at prints.c:332!
invalid operand: 0000
CPU: 1
EIP: 0010:[<c01721e0>]
EFLAGS: 00010286
eax: 0000001c ebx: c02e8100 ecx: c0285d40 edx: 000047c1
esi: d5953dbc edi: c02e8500 ebp: 00000000 esp: d5953d80
ds: 0018 es: 0018 ss: 0018
Process umount (pid: 4152, stackpage=d5953000)
Stack: c024c418 0000014c 00000000 e48a90bc da5c3800 d5953dd8 c02e8500 da5c3800
d5953dac d5953da8 d5952000 00000000 c017d726 da5c3800 c024e340 000000bc
e48a9000 e48a90bc 00000000 00000002 00000003 00000000 d85953e0 c01815ad
Call Trace: [<e48a90bc>] [<c017d726>] [<e48a9000>] [<e48a90bc>] [<c01815ad>]
[<e48a90bc>] [<c01138c7>] [<c0113744>] [<c0130216>] [<c0128a3d>] [<e48a9000>]
[<e48a90bc>] [<e48b23bc>] [<e48c6024>] [<c017e309>] [<c01700de>] [<c017e38d>]
[<c01700ec>] [<c013ad7b>] [<c0139faf>] [<c01401f8>] [<c013b269>] [<c01269a2>]
[<c013b2a0>] [<c0106f67>]
Code: 0f 0b 83 c4 08 83 7c 24 2c 00 74 08 8b 44 24 2c 80 48 28 01

>>EIP; c01721e0 <load_nls_default+111b8/272cc> <=====
Trace; e48a90bc <END_OF_CODE+3d7ea55/????>
Trace; c017d726 <load_nls_default+1c6fe/272cc>
Trace; e48a9000 <END_OF_CODE+3d7e999/????>
Trace; e48a90bc <END_OF_CODE+3d7ea55/????>
Trace; c01815ad <load_nls_default+20585/272cc>
Trace; e48a90bc <END_OF_CODE+3d7ea55/????>
Trace; c01138c7 <do_BUG+22f/770>
Trace; c0113744 <do_BUG+ac/770>
Trace; c0130216 <__alloc_pages+6e/280>
Trace; c0128a3d <filemap_nopage+b9/420>
Trace; e48a9000 <END_OF_CODE+3d7e999/????>
Trace; e48a90bc <END_OF_CODE+3d7ea55/????>
Trace; e48b23bc <END_OF_CODE+3d87d55/????>
Trace; e48c6024 <END_OF_CODE+3d9b9bd/????>
Trace; c017e309 <load_nls_default+1d2e1/272cc>
Trace; c01700de <load_nls_default+f0b6/272cc>
Trace; c017e38d <load_nls_default+1d365/272cc>
Trace; c01700ec <load_nls_default+f0c4/272cc>
Trace; c013ad7b <get_super+7a7/874>
Trace; c0139faf <__mntput+53/678>
Trace; c01401f8 <path_release+28/84>
Trace; c013b269 <do_umount+281/5ac>
Trace; c01269a2 <do_munmap+29a/2b8>
Trace; c013b2a0 <do_umount+2b8/5ac>
Trace; c0106f67 <__read_lock_failed+1107/25f0>
Code; c01721e0 <load_nls_default+111b8/272cc>
00000000 <_EIP>:
Code; c01721e0 <load_nls_default+111b8/272cc> <=====
0: 0f 0b ud2a <=====
Code; c01721e2 <load_nls_default+111ba/272cc>
2: 83 c4 08 add $0x8,%esp
Code; c01721e5 <load_nls_default+111bd/272cc>
5: 83 7c 24 2c 00 cmpl $0x0,0x2c(%esp,1)
Code; c01721ea <load_nls_default+111c2/272cc>
a: 74 08 je 14 <_EIP+0x14> c01721f4 <load_nls_default+111cc/272cc>
Code; c01721ec <load_nls_default+111c4/272cc>
c: 8b 44 24 2c mov 0x2c(%esp,1),%eax
Code; c01721f0 <load_nls_default+111c8/272cc>
10: 80 48 28 01 orb $0x1,0x28(%eax)

--
_________________________
Carlos E Gorges
(carlos@techlinux.com.br)
Tech informática LTDA
Brazil
_________________________



INT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1094.45 BogoMIPS
CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Katmai) stepping 03
Total of 2 processors activated (2188.90 BogoMIPS).
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=49 pin1=2 pin2=0
number of MP IRQ sources: 24.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 0 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 003 03 1 1 0 1 0 1 1 A9
11 003 03 1 1 0 1 0 1 1 B1
12 003 03 1 1 0 1 0 1 1 B9
13 003 03 1 1 0 1 0 1 1 C1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 548.5183 MHz.
..... host bus clock speed is 99.7304 MHz.
cpu: 0, clocks: 997304, slice: 332434
CPU0<T0:997296,T1:664848,D:14,S:332434,C:997304>
cpu: 1, clocks: 997304, slice: 332434
CPU1<T0:997296,T1:332416,D:12,S:332434,C:997304>
checking TSC synchronization across CPUs: passed.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb200, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I8,P0) -> 16
PCI->APIC IRQ transform: (B0,I9,P0) -> 17
PCI->APIC IRQ transform: (B0,I10,P0) -> 18
PCI->APIC IRQ transform: (B0,I11,P0) -> 19
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
apm: disabled - APM is not SMP safe.
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 256 Unix98 ptys configured
Serial driver version 5.05b (2001-05-03) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS03 at 0x02e8 (irq = 3) is a 16550A
block: queued sectors max/low 340717kB/209645kB, 1024 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 90871U2, ATA DISK drive
hdb: CREATIVECD-RW RW8432E, ATAPI CD/DVD-ROM drive
hdc: SAMSUNG SV1364D, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, UDMA(33)
hdc: 26762400 sectors (13702 MB) w/480KiB Cache, CHS=26550/16/63, UDMA(33)
Partition check:
hda: hda1 hda2 < hda5 >
hdc: [PTBL] [1665/255/63] hdc1
PPP generic driver version 2.4.1
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 236k freed
Adding Swap: 80288k swap-space (priority -1)
LVM version 0.9.1_beta3 by Heinz Mauelshagen (25/01/2001)
lvm -- Module successfully initialized
Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.65 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge needs ETBF enabled.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: CREATIVE Model: CD-RW RW8432E Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
3c59x.c:LK1.1.13 27 Jan 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
eth0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd800, 00:01:02:bd:fc:dd, IRQ 18
product code 4347 rev 00.12 date 08-04-00
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
Media override to transceiver type 0 (10baseT).
Enabling bus-master transmits and whole-frame receives.
eth0: scatter/gather enabled. h/w checksums enabled
eth1: 3Com PCI 3c905B Cyclone 100baseTx at 0xe000, 00:50:04:99:4a:bd, IRQ 16
product code 544a rev 00.12 date 04-23-99
8K byte-wide RAM 5:3 Rx:Tx split, 10baseT interface.
Media override to transceiver type 4 (100baseTX).
Enabling bus-master transmits and whole-frame receives.
eth1: scatter/gather enabled. h/w checksums enabled
eth0: Media override to transceiver 0 (10baseT).
eth1: Media override to transceiver 4 (100baseTX).
cm: version $Revision: 5.64 $ time 23:15:29 Jun 3 2001
cm: found CM8738 adapter at io 0xd400 irq 16
chip version = 033
cm: Enable SPDIF loop
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
Winbond chip at EFER=0x3f0 key=0x87 devid=97 devrev=73 oldid=ff
Winbond chip type 83977TF / SMSC 97w33x/97w34x
Winbond LPT Config: cr_30=01 60,61=0378 70=07 74=03, f0=02
Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3
Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0
Winbond LPT Config: Port mode=ECP
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 16
0x378: readIntrThreshold is 16
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x48
0x378: ECP settings irq=7 dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 on Intel 440BX @ 0xe0000000 64MB
[drm] Initialized tdfx 1.0.0 20000928 on minor 63
ncr53c8xx: at PCI bus 0, device 11, function 0
ncr53c8xx: 53c895 detected with Tekram NVRAM
ncr53c895-0: rev 0x1 on pci bus 0 device 11 function 0 irq 19
ncr53c895-0: Tekram format NVRAM, ID 7, Fast-40, Parity Checking
scsi1 : ncr53c8xx-3.4.3b-20010512
Vendor: SEAGATE Model: ST318436LW Rev: 0010
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
ncr53c895-0-<0,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 31)
SCSI device sda: 35885168 512-byte hdwr sectors (18373 MB)
sda: sda1 sda2 sda3 sda4
reiserfs: checking transaction log (device 08:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:02) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:03) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:04) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
lvm -- Module successfully deactivated
scsi1 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 1 channel 0.
ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0
scsi1: device driver called scsi_done() for a synchronous reset.
SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 2603007f
I/O error: dev 08:04, sector 66928
vs-13070: reiserfs_read_inode2: i/o failure occurred trying to find stat data of [5 45 0x0 SD]
scsi1 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 1 channel 0.
ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0
scsi1: device driver called scsi_done() for a synchronous reset.
SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 2603007f
I/O error: dev 08:04, sector 66584
ncr53c895-0-<0,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 31)
scsi1 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 1 channel 0.
ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0
scsi1: device driver called scsi_done() for a synchronous reset.
ncr53c895-0-<0,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 31)
scsi1 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 1 channel 0.
ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0
scsi1: device driver called scsi_done() for a synchronous reset.
SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 2603007f
I/O error: dev 08:04, sector 49616
journal-601, buffer write failed
kernel BUG at prints.c:332!
invalid operand: 0000
CPU: 1
EIP: 0010:[<c01721e0>]
EFLAGS: 00010286
eax: 0000001c ebx: c02e8100 ecx: c0285d40 edx: 00003dac
esi: d6e0fd6c edi: c02e8500 ebp: 00000000 esp: d6e0fd30
ds: 0018 es: 0018 ss: 0018
Process cat (pid: 4140, stackpage=d6e0f000)
Stack: c024c418 0000014c 00000000 e4ab30bc dfba4000 d6e0fd88 c02e8500 dfba4000
d6e0fd5c d6e0fd58 d6e0e000 00000000 c017d726 dfba4000 c024e340 00000000
00000002 dfba4000 e4ab30bc 00000003 00000004 00000000 d6fb2980 c017dc1d
Call Trace: [<e4ab30bc>] [<c017d726>] [<e4ab30bc>] [<c017dc1d>] [<e4ab30bc>]
[<e4ab30bc>] [<e4ab30fc>] [<c017f0b4>] [<c0181815>] [<e4ab30bc>] [<c017d075>]
[<e4ab3000>] [<c017fb2d>] [<c0177922>] [<c0169ed5>] [<e4ab3000>] [<e4ab30bc>]
[<e4abc3bc>] [<e4ad006c>] [<c017fd6a>] [<c016a20b>] [<c014a861>] [<c014c07a>]
[<c01284b2>] [<c012858b>] [<c01284c0>] [<c01352f6>] [<c0106f67>]

Code: 0f 0b 83 c4 08 83 7c 24 2c 00 74 08 8b 44 24 2c 80 48 28 01
scsi1 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 1 channel 0.
ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0
scsi1: device driver called scsi_done() for a synchronous reset.
ncr53c895-0-<0,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 31)
SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 18000002
[valid=0] Info fld=0x0, Current sd08:04: sense key Aborted Command
Additional sense indicates Scsi parity error
I/O error: dev 08:04, sector 49624
scsi1 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 1 channel 0.
ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0
scsi1: device driver called scsi_done() for a synchronous reset.
ncr53c895-0-<0,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 31)
SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 18000002
[valid=0] Info fld=0x0, Current sd08:04: sense key Aborted Command
Additional sense indicates Scsi parity error
I/O error: dev 08:04, sector 49632
scsi1 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 1 channel 0.
ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0
scsi1: device driver called scsi_done() for a synchronous reset.
SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 2603007f
I/O error: dev 08:01, sector 42416
journal-601, buffer write failed
kernel BUG at prints.c:332!
invalid operand: 0000
CPU: 1
EIP: 0010:[<c01721e0>]
EFLAGS: 00010286
eax: 0000001c ebx: c02e8100 ecx: c0285d40 edx: 000047c1
esi: d5953dbc edi: c02e8500 ebp: 00000000 esp: d5953d80
ds: 0018 es: 0018 ss: 0018
Process umount (pid: 4152, stackpage=d5953000)
Stack: c024c418 0000014c 00000000 e48a90bc da5c3800 d5953dd8 c02e8500 da5c3800
d5953dac d5953da8 d5952000 00000000 c017d726 da5c3800 c024e340 000000bc
e48a9000 e48a90bc 00000000 00000002 00000003 00000000 d85953e0 c01815ad
Call Trace: [<e48a90bc>] [<c017d726>] [<e48a9000>] [<e48a90bc>] [<c01815ad>]
[<e48a90bc>] [<c01138c7>] [<c0113744>] [<c0130216>] [<c0128a3d>] [<e48a9000>]
[<e48a90bc>] [<e48b23bc>] [<e48c6024>] [<c017e309>] [<c01700de>] [<c017e38d>]
[<c01700ec>] [<c013ad7b>] [<c0139faf>] [<c01401f8>] [<c013b269>] [<c01269a2>]
[<c013b2a0>] [<c0106f67>]

Code: 0f 0b 83 c4 08 83 7c 24 2c 00 74 08 8b 44 24 2c 80 48 28 01
scsi1 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 1 channel 0.
ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0
scsi1: device driver called scsi_done() for a synchronous reset.
SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 2603007f
I/O error: dev 08:01, sector 42424
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 548.540
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1094.45

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 548.540
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1094.45

PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 3).
Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 3).
Master Capable. Latency=64. Min Gnt=136.
Bus 0, device 7, function 0:
ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
Master Capable. Latency=64.
I/O at 0xf000 [0xf00f].
Bus 0, device 7, function 2:
USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
IRQ 19.
Master Capable. Latency=64.
I/O at 0xd000 [0xd01f].
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 2).
IRQ 9.
Bus 0, device 8, function 0:
Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 16).
IRQ 16.
Master Capable. Latency=64. Min Gnt=2.Max Lat=24.
I/O at 0xd400 [0xd4ff].
Bus 0, device 9, function 0:
Communication controller: Motorola SM56 PCI Modem (rev 0).
IRQ 17.
Master Capable. Latency=64. Min Gnt=1.Max Lat=255.
Prefetchable 32 bit memory at 0xed004000 [0xed0040ff].
Bus 0, device 10, function 0:
Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 48).
IRQ 18.
Master Capable. Latency=64. Min Gnt=10.Max Lat=10.
I/O at 0xd800 [0xd87f].
Non-prefetchable 32 bit memory at 0xed002000 [0xed00207f].
Bus 0, device 12, function 0:
Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (#2) (rev 48).
IRQ 16.
Master Capable. Latency=64. Min Gnt=10.Max Lat=10.
I/O at 0xe000 [0xe07f].
Non-prefetchable 32 bit memory at 0xed003000 [0xed00307f].
Bus 0, device 11, function 0:
SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c895 (rev 1).
IRQ 19.
Master Capable. Latency=64. Min Gnt=30.Max Lat=64.
I/O at 0xdc00 [0xdcff].
Non-prefetchable 32 bit memory at 0xed000000 [0xed0000ff].
Non-prefetchable 32 bit memory at 0xed001000 [0xed001fff].
Bus 1, device 0, function 0:
VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 1).
IRQ 16.
Non-prefetchable 32 bit memory at 0xe4000000 [0xe5ffffff].
Prefetchable 32 bit memory at 0xe8000000 [0xe9ffffff].
I/O at 0xc000 [0xc0ff].
\
 
 \ /
  Last update: 2005-03-22 12:54    [W:2.515 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site