Messages in this thread |  | | Date | Sat, 30 Jun 2001 18:21:10 -0700 | | From | Tom Rini <> | | Subject | Broken tulip in 2.4.5+ |
| |
Hello. The current tulip driver in 2.4.5 and up no longer works with my 'tulip' ethernet card. 0.9.14 (what's in prior to 2.4.5-pre6, iirc) works fine with the card, as does de4x5. Version 0.9.15-pre5 (2.4.6-pre8) and 1.1.8 (from sourceforge) both don't work. The card is: 01:15.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22) Flags: bus master, medium devsel, latency 96, IRQ 58 I/O ports at 0400 [size=128] Memory at 80080000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=256K] The error(s) are as follows, for both 0.9.15-pre5 and 1.1.8: Linux Tulip driver version 0.9.15-pre5 (June 16, 2001) tulip0: EEPROM default media type 10baseT. tulip0: Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block. tulip0: Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block. tulip0: Index #2 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block. tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block. tulip0: MII transceiver #1 config 1000 status 782d advertising 05e1. eth1: Digital DS21140 Tulip rev 34 at 0xd2118000, 00:00:94:A3:FA:0D, IRQ 58. eth1: Using EEPROM-set media 10baseT. eth1: Setting full-duplex based on MII#1 link partner capability of 41e1. NETDEV WATCHDOG: eth1: transmit timed out eth1: 21140 transmit timed out, status fc680000, SIA ffffff0b ffffffff 1c09fdc0 fffffec8, resetting. .. eth1: transmit timed out, switching to 100baseTx-FDX media.
-- Tom Rini (TR1265) http://gate.crashing.org/~trini/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |