lkml.org 
[lkml]   [2001]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC] I/O Access Abstractions
Date

alan@lxorguk.ukuu.org.uk said:
> PCI memory (and sometimes I/O) writes are posted, Since x86 memory
> writes are also parallelisable instructions and since the CPU merely
> has to retire the writes in order your stall basically doesnt exist.

True. I can envisage a situation where the overhead of the function call is
noticeable. It would be interesting to see if it actually happens in real
life. If so, and if we set up the abstraction properly, we can keep
the accesses inline for those architectures where it's a win.

#ifdef CONFIG_VIRTUAL_BUS
#define resource_readb(res, x) res->readb(res, x)
#else
#define resource_readb(res, x) readb(x)
#endif

Having per-resource I/O methods would help us to remove some of the
cruft which is accumulating in various non-x86 code. Note that the below is
the _core_ routines for _one_ board - I'm not even including the extra
indirection through the machine vector here....

static inline volatile __u16 *
port2adr(unsigned int port)
{
if (port > 0x2000)
return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
else if (port >= 0x1000)
return (volatile __u16 *) (PA_83902 + (port << 1));
else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1));
else
return (volatile __u16 *) (PA_SUPERIO + (port << 1));
}

static inline int
shifted_port(unsigned long port)
{
/* For IDE registers, value is not shifted */
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
return 0;
else
return 1;
}

unsigned char se_inb(unsigned long port)
{
unsigned long pciiobrSet;
volatile unsigned long pciIoArea;
unsigned char pciIoData;

if (PXSEG(port))
return *(volatile unsigned char *)port;
#if defined(CONFIG_CPU_SUBTYPE_SH7751) && defined(CONFIG_PCI)
else if((port >= PCIBIOS_MIN_IO) && (port <= PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)) {
pciiobrSet = (port & 0xFFFC0000);
*PCIIOBR = pciiobrSet;
pciIoArea = port & 0x0003FFFF;
pciIoArea += PCI_IO_AREA;
pciIoData = *((unsigned char*)pciIoArea);
return (unsigned char)pciIoData;
}
#endif /* defined(CONFIG_CPU_SUBTYPE_SH7751) && defined(CONFIG_PCI) */
else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port);
else if (shifted_port(port))
return (*port2adr(port) >> 8);
else
return (*port2adr(port))&0xff;
}




--
dwmw2


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:55    [W:0.123 / U:1.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site