lkml.org 
[lkml]   [2001]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Cleanup kbuild for aic7xxx
Here is 2.4.5 plain with the old aic driver.


(scsi0) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/12/1
(scsi0) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 392 instructions downloaded
(scsi1) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/12/0
(scsi1) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 392 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AIC-7896/7 Ultra2 SCSI host adapter>

And then it breaks.

scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 Inquiry 00 00 00 ff 00
(scsi0:0:0:0) Aborting scb 0, flags 0x6
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
(scsi0:0:0:0) Sending WDTR message.
(scsi0:0:0:0) Reset called, scb 0, flags 0x16
(scsi0:0:0:0) Bus Device reset, scb flags 0x16, Message-Out phase
(scsi0:0:0:0) SCSISIGI 0xb6, SEQADDR 0xbd, SSTAT0 0x2, SSTAT1 0x3
(scsi0:0:0:0) Queueing device reset command.
(scsi0:-1:-1:-1) 0 commands found and queued for completion.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
(scsi0:0:0:0) Reset called, scb 0, flags 0x1076
(scsi0:0:-1:-1) Reset channel called, will initiate reset.
(scsi0:0:-1:-1) Resetting currently active channel.
(scsi0:0:-1:-1) Channel reset
(scsi0:0:-1:-1) Reset device, active_scb 0
(scsi0:0:0:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:1:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:2:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:3:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:4:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:5:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:6:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:8:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:9:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:10:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:11:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:12:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:13:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:14:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:15:-1) Cleaning up status information and delayed_scbs.
(scsi0:0:-1:-1) Cleaning QINFIFO.
(scsi0:0:-1:-1) Cleaning waiting_scbs.
(scsi0:0:-1:-1) Cleaning waiting for selection list.
(scsi0:0:-1:-1) Cleaning disconnected scbs list.
(scsi0:0:0:0) Aborting scb 0
(scsi0:0:0:0) Aborting scb 1
(scsi0:-1:-1:-1) 2 commands found and queued for completion.
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
(scsi0:0:0:0) Sending WDTR message.
(scsi0:0:0:0) Reset called, scb 0, flags 0x6
(scsi0:0:0:0) Bus Device reset, scb flags 0x6, Message-Out phase
(scsi0:0:0:0) SCSISIGI 0xb6, SEQADDR 0xbd, SSTAT0 0x2, SSTAT1 0x3
(scsi0:0:0:0) Queueing device reset command.
(scsi0:-1:-1:-1) 0 commands found and queued for completion.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.

And it happily loops on this over and over.

David


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:55    [W:0.091 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site