lkml.org 
[lkml]   [2001]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[OOPS] Failed to boot 2.4.6-pre5
Hi,

[1.] One line summary of the problem:
I can not start 2.4.6-pre5 on my machine.

[2.] Full description of the problem/report:
I've tried to upgrade from 2.4.5-pre1 to 2.4.6-pre5 but it failed the new
kernel failed to boot. It OOPS-es while it's starting. I managed to write
down some of the OOPS parameters.


[3.] Keywords (i.e., modules, networking, kernel):
kernel boot.

[4.] Kernel version (from /proc/version):
2.4.6-pre5

[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)

All information that I have not saved is replaced with zeroes. So I got
only the EIP, call trace and the Code:

ksymoops 2.3.4 on i686 2.4.5-pre1. Options used
-v /usr/src/linux/vmlinux (specified)
-K (specified)
-L (specified)
-o /lib/modules/2.4.5-pre1/ (default)
-m /boot/System.map (specified)

No modules in ksyms, skipping objects
Oops: 0001
CPU: 1
EIP: 0010:[<c0116f72>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00000000
eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00000000 ebp: 00000000 esp: 00000000
ds: 0000 es: 0000 ss: 0000
Process swapper (pid: 0, stackpage=00000000)
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Call Trace: [<c0116d8d>] [<c0107fe9>] [<c0105000>] [<c0106bd0>] [<c0105000>] [<c0105000>]
Code: 0f 0b 83 c4 0c 90 8b 43 08 85 c0 75 15 fb 8b 43 10 50 8b 43

>>EIP; c0116f72 <tasklet_hi_action+6a/ac> <=====
Trace; c0116d8d <do_softirq+45/6c>
Trace; c0107fe9 <do_IRQ+9d/b0>
Trace; c0105000 <_stext+0/0>
Trace; c0106bd0 <ret_from_intr+0/7>
Trace; c0105000 <_stext+0/0>
Trace; c0105000 <_stext+0/0>
Code; c0116f72 <tasklet_hi_action+6a/ac>
00000000 <_EIP>:
Code; c0116f72 <tasklet_hi_action+6a/ac> <=====
0: 0f 0b ud2a <=====
Code; c0116f74 <tasklet_hi_action+6c/ac>
2: 83 c4 0c addl $0xc,%esp
Code; c0116f77 <tasklet_hi_action+6f/ac>
5: 90 nop
Code; c0116f78 <tasklet_hi_action+70/ac>
6: 8b 43 08 movl 0x8(%ebx),%eax
Code; c0116f7b <tasklet_hi_action+73/ac>
9: 85 c0 testl %eax,%eax
Code; c0116f7d <tasklet_hi_action+75/ac>
b: 75 15 jne 22 <_EIP+0x22> c0116f94 <tasklet_hi_action+8c/ac>
Code; c0116f7f <tasklet_hi_action+77/ac>
d: fb sti
Code; c0116f80 <tasklet_hi_action+78/ac>
e: 8b 43 10 movl 0x10(%ebx),%eax
Code; c0116f83 <tasklet_hi_action+7b/ac>
11: 50 pushl %eax
Code; c0116f84 <tasklet_hi_action+7c/ac>
12: 8b 43 00 movl 0x0(%ebx),%eax

[6.] A small shell script or example program which triggers the
problem (if possible)

N/A.

[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux cyrix 2.4.5-pre1 #1 Tue May 8 11:27:27 EEST 2001 i686 unknown

Gnu C egcs-2.91.66
Gnu make 3.77
binutils 2.9.1.0.25
usage: fdformat [ -n ] device
mount 2.9v
modutils 2.4.6
e2fsprogs 1.15
PPP 2.4.0b1
Linux C Library 2.2.3
Dynamic linker (ldd) 2.2.3
Procps 2.0.6
Net-tools 1.52
Kbd 0.99
Sh-utils 1.16
Modules Loaded

[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : CyrixInstead
cpu family : 6
model : 2
model name : 6x86MX 2.5x Core/Bus Clock
stepping : 7
cpu MHz : 166.451
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : yes
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de tsc msr cx8 pge cmov mmx cyrix_arr
bogomips : 331.77

[7.3.] Module information (from /proc/modules):
No modules are loaded.

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0280-029f : eth0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
4000-403f : Intel Corporation 82371AB PIIX4 ACPI
5000-501f : Intel Corporation 82371AB PIIX4 ACPI
6400-641f : Intel Corporation 82371AB PIIX4 USB
6800-68ff : Realtek Semiconductor Co., Ltd. RTL-8139
6800-68ff : 8139too
6c00-6c1f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
6c00-6c1f : ne2k-pci
7000-70ff : Realtek Semiconductor Co., Ltd. RTL-8139 (#2)
7000-70ff : 8139too
7400-741f : Realtek Semiconductor Co., Ltd. RTL-8029(AS) (#2)
7400-741f : ne2k-pci
f000-f00f : Intel Corporation 82371AB PIIX4 IDE
f000-f007 : ide0



00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-01ffffff : System RAM
00100000-0021cd7f : Kernel code
0021cd80-0027c73f : Kernel data
e0000000-e00000ff : Realtek Semiconductor Co., Ltd. RTL-8139
e0000000-e00000ff : 8139too
e0001000-e00010ff : Realtek Semiconductor Co., Ltd. RTL-8139 (#2)
e0001000-e00010ff : 8139too
ffff0000-ffffffff : reserved


[7.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: Intel Corporation 430TX - 82439TX MTXC (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64 set

00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set

00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Region 4: I/O ports at f000

00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Interrupt: pin D routed to IRQ 15
Region 4: I/O ports at 6400

00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9

00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 8139 (rev 10)
Subsystem: Unknown device 10ec:8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 min, 64 max, 64 set
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at 6800
Region 1: Memory at e0000000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME-
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 8029
Subsystem: Unknown device 10ec:8029
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 6c00

00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 8139 (rev 10)
Subsystem: Unknown device 10bd:0320
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 min, 64 max, 64 set
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 7000
Region 1: Memory at e0001000 (32-bit, non-prefetchable)

00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 8029
Subsystem: Unknown device 10ec:8029
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 7400

[7.6.] SCSI information (from /proc/scsi/scsi)

No SCSI.

[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:

It seems to be something related to the latest changes in the do_softirq stuff.


--
Mircea Damian
E-mails: dmircea@kappa.ro, dmircea@roedu.net
WebPage: http://taz.mania.k.ro/~dmircea/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:55    [W:0.028 / U:1.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site