lkml.org 
[lkml]   [2001]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-usb-devel] usb.c: USB device not accepting new address=4 (error=-110)
I had difficulties making it all work on ServerWorks III LE
based machines, most notably 2450 & 6450.

Dell fixed 2450 eventually, BIOS needs upgrade to level A11.

> > 30: 0 0 IO-APIC-level usb-ohci

The line above says that MP table contained the device.
This is the situarion with 6450 - they have the MP entry,
but there is no way to make it work. I am working with their
BIOS and hw engineers on a fix.

For the moment the workaround is to run the whole thing
with "noapic". Try it, perhaps it helps the machine in question.

-- Pete

> From: David Brownell <david-b@pacbell.net>
> To: Ingo Oeser <ingo.oeser@informatik.tu-chemnitz.de>
> Cc: linux-usb-devel@lists.sourceforge.net, lkml <linux-kernel@vger.kernel.org>
> Reply-To: linux-usb-devel@lists.sourceforge.net
> Date: Sat, 09 Jun 2001 06:14:24 -0700

> Then whatever sets up your ServerWorks ServerSet III LE chipset
> needs its PCI IRQ setup fixed ... I'm not sure how to do this.
>
> Perhaps someone who's familiar with arch/i386/kernel/pci-*.c
> irq setup can suggest the right patch for this problem. I think
> the "dmesg" output in your original post probably had the info
> needed to figure that out.
>
> - Dave
>
> > From: "Ingo Oeser" <ingo.oeser@informatik.tu-chemnitz.de>
> > Sent: Saturday, June 09, 2001 12:19 AM
> >
> > > David Brownell wrote:
> > > Can you verify, using /proc/interrupts, that you're actually
> > > getting interrupts on irq #30 when these timeouts happen?
> >
> > I get none:
> > 30: 0 0 IO-APIC-level usb-ohci
> >
> > > One possibility: the timeout happens because the HCD
> > > is not getting the interrupts it expects. That would imply
> > > that the PCI IRQ setup for this device isn't quite right.
> > > Such problems have been seen before.
> >
> > This seems to be my problem. How can I solve this?
> >
> > My BIOS cannot set a specific IRQ for USB like other BIOSes do.
> >
> > And now that you say^W it, I remember sth. like this on
> > linux-kernel... I just didn't know the messages...
> >
> > Thanks and Regards
> >
> > Ingo Oeser
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:55    [W:0.280 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site