lkml.org 
[lkml]   [2001]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectSmall es1371 documentation fix (joyport) (fwd)
Same patch should be applied for the es1370 also. (at least the joystick
part.)

--
SaPE - Peter, Sasi - mailto:sape@sch.hu - http://sape.iq.rulez.org/

---------- Forwarded message ----------
Date: Wed, 09 May 2001 15:36:21 -0400
From: David Riley <oscar@the-rileys.net>
To: linux-kernel@vger.kernel.org, t.sailer@alumni.ethz.ch
Subject: Small es1371 documentation fix (joyport)

The documentation for the es1371 driver doesn't mention how to
activate/specify the joystick port's base address (I had to look in the
code). This patch fixes it. The same probably applies to the es1370 as
well as other cards, but lacking said cards, I couldn't say for sure.
You may wish to re-word this, as it is not very concise, nor does it
read well (not that that's ever mattered in documentation before ;-).
If you have any replies, please CC me directly (I'm no longer subscribed
to the list).

Thanks,
David
--- es1371 Fri Jul 10 17:03:35 1998
+++ es1371 Wed May 9 15:20:56 2001
@@ -1,3 +1,11 @@
+/proc/sound, /dev/sndstat
+-------------------------
+
+/proc/sound and /dev/sndstat is not supported by the
+driver. To find out whether the driver succeeded loading,
+check the kernel log (dmesg).
+
+
ALaw/uLaw sample formats
------------------------

@@ -51,6 +59,16 @@
See http://www.cgs.fi/~tt/timidity/.


+Joystick Port
+-------------
+
+To enable the joystick port, enter "es1371=[port addr]" on the
+kernel command line. Alternatively, if running as a module,
+enter "joystick=[port addr]" on the module's option line.
+Accepatble values for "port addr" are 0x200, 0x208, 0x210, and
+0x218.
+
+

Thomas Sailer
-sailer@ife.ee.ethz.ch
+t.sailer@alumni.ethz.ch
\
 
 \ /
  Last update: 2005-03-22 12:52    [W:0.030 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site