lkml.org 
[lkml]   [2001]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subjectide-scsi / cd-writing 2.4.3
From
Date
Hi folks,

I used to be able to use my cdwriter (Philips CDD3610) on 2.2.17. Now,
with 2.4.4 I'm not able to get it to work. It's not a permission
problem as far as I can see. I suspect ide-scsi?

See the output of cdrecord (I tried to burn 450MB):

Cdrecord 1.10a18 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PHILIPS '
Identifikation : 'CDD3610 CD-R/RW '
Revision : '3.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 786432 = 768 KB
FIFO size : 4194304 = 4096 KB
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.17
Track 01: data unknown length padsize: 30 KB
Lout start: 0 MB (00:02/00) = 0 sectors
Current Secsize: 2048
ATIP start of lead in: -11325 (97:31/00)
ATIP start of lead out: 336225 (74:45/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Starting to write CD/DVD at speed 2 in write mode for single session.
/usr/bin/cdrecord: WARNING: Track size unknown. Data may not fit on disk.
Performing OPC...
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 01 74 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 6.818s timeout 40s
Track 01: 0 MB written.
write track data: error after 761856 bytes
Writing time: 18.023s
Sense Bytes: F0 00 00 00 00 00 00 19 00 00 38 13 00 00 00 00 0C DB
/usr/bin/cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.011s timeout 480s
cmd finished after 0.011s timeout 480s
/usr/bin/cdrecord: Input/output error. mode select g1: scsi sendcmd: no error
CDB: 55 10 00 00 00 00 00 00 10 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.005s timeout 40s

Any Ideas?

--
Tschoe, Get my gpg-public-key here
Jens http://gecius.de/gpg-key.txt
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:52    [W:0.024 / U:1.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site