[lkml]   [2001]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.4.5 panic while starting aic7xxx
>SCSI subsystem driver Revision: 1.00
>PCI: Found IRQ 11 for device 00:0c.0
>scsi0: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13
> <Adaptec 2940 Ultra2 SCSI adapter>
> aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
>ahc_intr: AWAITING_MSG for an SCB that does not have a waiting message
>SCSIID = 7, target_mask = 1
>Kernel panic: SCB = 3, SCB Control = 40, MSG_OUT = 80 SCB flags = 6000
>In interrupt handler - not syncing

This looks like the firmware file is not in sync with the rest
of the driver. Depending on the host environment, you may be
able to rebuild the firmware yourself. Just check the box in
the kernel config section for the aic7xxx driver to rebuild
the firmware.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:17    [W:3.433 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site