lkml.org 
[lkml]   [2001]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject2..4.5-pre5 bad fsck
Date
2.4.2 works fine.
2.4.5-pre5 won't get past fsck of /dev/md0 -- locks up towards the end. I'm
running the same kernel on two other machine (different motherboards though)
I'm using gcc-3.0 and glibc-2.2.3

/dev/md0 is a dual-IDE RAID1 (2nd drive is currently disabled)
md0 : active raid1 hda1[0]
39082560 blocks [2/1] [U_]

Under 2.4.2 boot fsck ends
/dev/md0 was not cleanly unmounted, check forced.
/dev/md0: x/x files (x% non-contiguous), x/x blocks

But under 2.4.5-pre5 it doesn't get past the first "check forced" message.
It just locks up completely after it runs for a couple of minutes.

Motherboard is SuperMicro 370dl3
Disk WDC WD400BB-00AUA1
PCI Info:
00:00.0 Host bridge: Relience Computer CNB20HE (rev 05)
00:00.1 Host bridge: Relience Computer CNB20HE (rev 05)
00:0f.1 IDE interface: Relience Computer: Unknown device 0211


________________________________________
Michael D. Black Principal Engineer
mblack@csihq.com 321-676-2923,x203
http://www.csihq.com Computer Science Innovations
http://www.csihq.com/~mike My home page
FAX 321-676-2355

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:53    [W:0.022 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site