lkml.org 
[lkml]   [2001]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] ppc xconfig 2.2.5-pre4
On Mon, May 21, 2001 at 03:29:31AM +0200, Andrzej Krzysztofowicz wrote:

> The following patch fixes ppc xconfig potential problem introduced in
> 2.4.5-pre4.

xconfig has other issues on PPC at the momement, if you select and 8xx or
8260 CPU. See the inlined.

--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/

===== drivers/net/Config.in 1.14 vs edited =====
--- 1.14/drivers/net/Config.in Wed Apr 25 19:35:07 2001
+++ edited/drivers/net/Config.in Wed May 2 14:44:24 2001
@@ -38,7 +38,31 @@
tristate ' BMAC (G3 ethernet) support' CONFIG_BMAC
tristate ' GMAC (G4/iBook ethernet) support' CONFIG_GMAC
tristate ' Symbios 53c885 (Synergy ethernet) support' CONFIG_NCR885E
- tristate ' National DP83902AV (Oak ethernet) support' CONFIG_OAKNET
+ if [ "$CONFIG_4xx" = "y" ]; then
+ tristate ' National DP83902AV (Oak ethernet) support' CONFIG_OAKNET
+ fi
+ if [ "$CONFIG_8xx" = "y" -o "$CONFIG_8260" = "y" ]; then
+ bool 'CPM SCC Ethernet' CONFIG_SCC_ENET
+ if [ "$CONFIG_SCC_ENET" = "y" ]; then
+ choice 'SCC used for Ethernet (SCC3 valid only on 8xx)' \
+ "SCC1 CONFIG_SCC1_ENET \
+ SCC2 CONFIG_SCC2_ENET \
+ SCC3 CONFIG_SCC3_ENET" SCC1
+ fi
+ bool 'FCC Ethernet' CONFIG_FEC_ENET
+ if [ "$CONFIG_FEC_ENET" = "y" -a "$CONFIG_8260" = "y" ]; then
+ bool 'Ethernet on FCC1' CONFIG_FCC1_ENET
+ bool 'Ethernet on FCC2' CONFIG_FCC2_ENET
+ bool 'Ethernet on FCC3' CONFIG_FCC3_ENET
+ fi
+ if [ "$CONFIG_FEC_ENET" = "y" -a "$CONFIG_8xx" = "y" ]; then
+ bool 'Use MDIO for PHY configuration' CONFIG_USE_MDIO
+ fi
+ if [ "$CONFIG_8xx" = "y" -a "$CONFIG_FEC_ENET" = "y" \
+ -o "$CONFIG_SCC_ENET" = "y" ]; then
+ bool 'Use Big CPM Ethernet Buffers' CONFIG_ENET_BIG_BUFFERS
+ fi
+ fi
fi
if [ "$CONFIG_ZORRO" = "y" ]; then
tristate ' Ariadne support' CONFIG_ARIADNE
===== arch/ppc/config.in 1.17 vs edited =====
--- 1.17/arch/ppc/config.in Thu Apr 19 15:50:05 2001
+++ edited/arch/ppc/config.in Wed May 2 14:44:42 2001
@@ -337,12 +337,13 @@
endmenu

if [ "$CONFIG_8xx" = "y" ]; then
-source arch/ppc/8xx_io/Config.in
+ source arch/ppc/8xx_io/Config.in
fi

-if [ "$CONFIG_8260" = "y" ]; then
-source arch/ppc/8260_io/Config.in
-fi
+# Empty for now, but it will come back -- Tom
+#if [ "$CONFIG_8260" = "y" ]; then
+# source arch/ppc/8260_io/Config.in
+#fi

source drivers/usb/Config.in

===== arch/ppc/8xx_io/Config.in 1.4 vs edited =====
--- 1.4/arch/ppc/8xx_io/Config.in Thu Apr 26 15:34:57 2001
+++ edited/arch/ppc/8xx_io/Config.in Wed May 2 14:42:11 2001
@@ -4,20 +4,6 @@
mainmenu_option next_comment
comment 'MPC8xx CPM Options'

-if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
- bool 'CPM SCC Ethernet' CONFIG_SCC_ENET
- if [ "$CONFIG_SCC_ENET" = "y" ]; then
- choice 'SCC used for Ethernet' \
- "SCC1 CONFIG_SCC1_ENET \
- SCC2 CONFIG_SCC2_ENET \
- SCC3 CONFIG_SCC3_ENET" SCC1
- fi
- bool '860T FEC Ethernet' CONFIG_FEC_ENET
- if [ "$CONFIG_FEC_ENET" = "y" ]; then
- bool 'Use MDIO for PHY configuration' CONFIG_USE_MDIO
- fi
- bool 'Use Big CPM Ethernet Buffers' CONFIG_ENET_BIG_BUFFERS
-fi
bool 'Use SMC2 for UART' CONFIG_SMC2_UART
if [ "$CONFIG_SMC2_UART" = "y" ]; then
bool 'Use Alternate SMC2 I/O (823/850)' CONFIG_ALTSMC2
===== arch/ppc/8260_io/Config.in 1.1 vs edited =====
--- 1.1/arch/ppc/8260_io/Config.in Sat Jan 6 00:30:23 2001
+++ edited/arch/ppc/8260_io/Config.in Wed May 2 14:42:37 2001
@@ -3,23 +3,5 @@
#
if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
mainmenu_option next_comment
- comment 'MPC8260 Communication Options'
- bool 'CPM SCC Ethernet' CONFIG_SCC_ENET
- if [ "$CONFIG_SCC_ENET" = "y" ]; then
- bool 'Ethernet on SCC1' CONFIG_SCC1_ENET
- if [ "$CONFIG_SCC1_ENET" != "y" ]; then
- bool 'Ethernet on SCC2' CONFIG_SCC2_ENET
- fi
- fi
-#
-# CONFIG_FEC_ENET is only used to get netdevices to call our init
-# function. Any combination of FCC1,2,3 are supported.
-#
- bool 'FCC Ethernet' CONFIG_FEC_ENET
- if [ "$CONFIG_FEC_ENET" = "y" ]; then
- bool 'Ethernet on FCC1' CONFIG_FCC1_ENET
- bool 'Ethernet on FCC2' CONFIG_FCC2_ENET
- bool 'Ethernet on FCC3' CONFIG_FCC3_ENET
- fi
endmenu
fi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 12:53    [W:0.036 / U:0.380 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site