lkml.org 
[lkml]   [2001]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: tulip driver BROKEN in 2.4.5-pre4
Date
> Could you post the output of
>
> #tulip-diag -mm -aa -f
>
> with the broken driver?
> Some code that's required for Linksys Tulip clones was moved
> from pnic specific part into the generic part, perhaps that
> causes problems.

Here is the output from the kernels I've tested to try to get the
driver working:

2.4.4-ac6, this kernel works!

tulip-diag.c:v2.06 1/8/2001 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Digital DC21041 Tulip adapter at 0xd800.
Digital DC21041 Tulip chip registers at 0xd800:
0x00: ffe08000 ffffffff ffffffff 0129f000 0129f200 fc660000 fffe2002
ffffebef
0x40: fffe0000 ffff03ff ffffffff fffe0000 000001c8 ffffef05 ffffff3f
ffff0008
Port selection is half-duplex.
Transmit started, Receive started, half-duplex.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit unit is set to store-and-forward.
The NWay status register is 000001c8.
No MII transceivers found!
Internal autonegotiation state is 'Autonegotiation disabled'.

--------------------------------------------------------------

2.4.5-pre4 this kernel doesn't work

tulip-diag.c:v2.06 1/8/2001 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Digital DC21041 Tulip adapter at 0xd800.
Digital DC21041 Tulip chip registers at 0xd800:
0x00: ffe08000 ffffffff ffffffff 0129e000 0129e200 fc660000 fffe2202
ffffebef
0x40: fffe0000 ffff03ff ffffffff fffe0000 000050c8 ffffef01 ffffffff
ffff0008
Port selection is full-duplex.
Transmit started, Receive started, full-duplex.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit unit is set to store-and-forward.
The NWay status register is 000050c8.
No MII transceivers found!
Internal autonegotiation state is 'Negotiation complete'.

--------------------------------------------------------------

2.4.4-ac9 with tulip 1.1.7 driver (from sf.net/projects/tulip)

tulip-diag.c:v2.06 1/8/2001 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Digital DC21041 Tulip adapter at 0xd800.
Digital DC21041 Tulip chip registers at 0xd800:
0x00: ffe08000 ffffffff ffffffff 0129f000 0129f200 fc660000 fffe2202
ffffebef
0x40: fffe0000 ffff03ff ffffffff fffe0000 000050c8 ffffef01 ffffffff
ffff0008
Port selection is full-duplex.
Transmit started, Receive started, full-duplex.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit unit is set to store-and-forward.
The NWay status register is 000050c8.
No MII transceivers found!
Internal autonegotiation state is 'Negotiation complete'.


Let me know if I can provide any more useful information about the
driver problem.

John
----------------
jbk@postmark.net

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:17    [W:0.029 / U:3.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site