lkml.org 
[lkml]   [2001]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Breakage of opl3sax cards since 2.4.3 (at least)
On 02 May 2001 09:30:03 +0100, Vivek Dasmohapatra wrote:

> I have an isapnp opl3sax system [2.4.3-ac5] - the sound card
initialises

> fine, I just have to kick the second logical device with by cat'ing the
> following into /proc/isapnp:
>
> card 0 YMH0802
> dev 0 YMH0022
> port 0 0x201
> activate
>
> Which then activates the gameport: What are the contents of your
> /proc/isapnp?


this sounds similar to my manual running of isapnp

> Of course, you have a YMH0020, and I have a YMH0021, that could be making
> all the difference.



not quite, you seem to have a YMH0802, while I have a YMH0802, what
error were you originally getting?
with mine, it doesn't want to isapnp it, so after I do that on my own, I
get:
russ kernel: opl3sa2: Control I/O port 0x240 is not a YMF7xx chipset!

anyway, I changed the above to:

card 0 YMH0020
dev 0 YMH0022
port 0 0x201
activate

does nothing...the diff between the two /proc/isapnp's are (the second
part of the first chunk and the last chunk are a result of me running
isapnp):

-Card 1 'YMH0020:OPL3-SAX Sound Board' PnP version 1.0
+Card 1 'YMH0802:YAMAHA OPL3-SAx Audio System' PnP version 1.0
Logical device 0 'YMH0021:Unknown'
Device is active
Active port 0x240,0xe80,0x388,0x300,0x100
- Active IRQ 10 [0x2]
- Active DMA 0,3
+ Active IRQ 5 [0x2]
+ Active DMA 1,3
Resources 0
Priority preferred
Port 0x220-0x220, align 0xf, size 0x10, 16-bit address decoding
@@ -18,7 +18,7 @@
Priority acceptable
Port 0x240-0x240, align 0xf, size 0x10, 16-bit address decoding
Port 0xe80-0xe80, align 0x7, size 0x8, 16-bit address decoding
- Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding
+ Port 0x388-0x388, align 0x3, size 0x4, 16-bit address decoding
Port 0x300-0x300, align 0x1, size 0x2, 16-bit address decoding
Port 0x100-0xffe, align 0x1, size 0x2, 16-bit address decoding
IRQ 5,7,2/9,10,11 High-Edge
@@ -49,5 +49,5 @@
Priority acceptable
Port 0x203-0x203, align 0x0, size 0x1, 16-bit address decoding
Alternate resources 0:3
- Priority functional
+ Priority acceptable
Port 0x204-0x20f, align 0x0, size 0x1, 16-bit address decoding



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:52    [W:0.042 / U:0.080 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site