[lkml]   [2001]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Breakage of opl3sax cards since 2.4.3 (at least)
Actually, this occured at 2.4.2

I searched though the archives, and the only people who were able to get
this resolved were those with a non-isapnp card (by added isapnp=0).
However, I have an isapnp card and the driver doesn't think my card
exists. If I lod it, withot options, I get:

russ kernel: opl3sa2: ISA PnP activate failed
russ kernel: opl3sa2: No PnP cards found
russ kernel: opl3sa2: 0 PnP card(s) found.

OK, so I use my old isapnp.conf

russ:/home/russ# isapnp /etc/isapnp.conf

then insmod it like this:
Board 1 has Identity 81 ff ff ff ff 20 00 a8 65: YMH0020 Serial No -1
[checksum 81]
YMH0020/-1[0]{OPL3-SAX Sound Board}: Ports 0x240 0xE80 0x388 0x300
0x100; IRQ10 DMA0 DMA3 --- Enabled OK
YMH0020/-1[1]{OPL3-SAX Sound Board}: Port 0x204; --- Enabled OK

russ:/home/russ# insmod opl3sa2 irq=10 io=0x240 dma=0 dma2=3
mss_io=0xe80 isapnp=0
Using /lib/modules/2.4.4-ac1-lpp/kernel/drivers/sound/opl3sa2.o
/lib/modules/2.4.4-ac1-lpp/kernel/drivers/sound/opl3sa2.o: init_module:
No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters

hmm, and kern.log says:

russ kernel: opl3sa2: Control I/O port 0x240 is not a YMF7xx chipset!

something in the changeover forgot about my card
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:52    [W:0.053 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site