lkml.org 
[lkml]   [2001]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectPIO mode support for 82371mx?
Hi 

I was just wondering if there is any support for the 82371mx accelerator
in the IDE driver. It doesn't appear that way to me, but that can be my
fault :)

Just to be precise. I'm talking about this chip:

ftp://download.intel.com/support/chipsets/430mx/290525.pdf

I have tried stock debian 2.2 kernel (2.2.18.preX) and the harddrive is
detected as a standard drive:
ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14

A "hdparm -p /dev/hda" gives:

HDIO_SET_PIO_MODE failed: Function not implemented

Compiling a new kernel my self didn't yield anything different!! Skimming
through the sources gave me the impression that there isn't support for
this particular IDE chipset.

cat /proc/pci gives:

....

Bus 0, device 1, function 0:
Bridge: Intel 430MX - 82371MX MPIIX (rev 2)
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.

Can you help me out?? Anything wrong, or am I just not supposed to tune
the PIO modes on this laptop.

Regards Thomas






-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:53    [W:0.025 / U:6.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site