lkml.org 
[lkml]   [2001]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Ide Floppy problems
From
>> May 17 05:42:20 m kernel: hdd: lost interrupt
>> May 17 05:42:20 m kernel: ide-floppy: CoD != 0 in idefloppy_pc_intr
>> May 17 05:42:20 m kernel: hdd: ATAPI reset complete
>> May 17 05:43:10 m kernel: hdd: lost interrupt
>> May 17 05:43:10 m kernel: ide-floppy: CoD != 0 in idefloppy_pc_intr
>> May 17 05:43:10 m kernel: hdd: ATAPI reset complete
>> After another 1 minute of this repeated messages I push reset .
>> Any ideeas ?
>
> CONFIG_BLK_DEV_IDEFLOPPY=n
> CONFIG_BLK_DEV_IDESCSI=y
> CONFIG_SCSI=y
> CONFIG_BLK_DEV_SD=y
>
> And, your ZIP drive shows up as SCSI disk. This also has the advantage
> that you can use ziptool to write protect / unprotect / eject ZIP
> disks. Ide-floppy never worker properly for me. Ide-scsi has worked
> without problems.


Does not work with SCSI drivers. Same kind of error .

May 18 03:10:02 m kernel: hdd: lost interrupt
May 18 03:10:02 m kernel: ide-scsi: CoD != 0 in idescsi_pc_intr
May 18 03:10:02 m kernel: hdd: ATAPI reset complete
May 18 03:10:02 m kernel: hdd: irq timeout: status=0x80 { Busy }

--
Mihai Moldovanu



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:53    [W:0.025 / U:1.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site