[lkml]   [2001]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [NEW SCSI DRIVER] for 53c700 chip and NCR_D700 card against 2.4.4
>> If I am not mistaken, Richard Hirst has also done work on this thing.

> He did 53c710+. The 700 and 700/66 are much less capable devices.

Yes. But long ago he wrote:
You need quite a different driver from the 53c710 drivers that
exist, because 53c700 doesn't have DSA register. I've attached
a diff for 2.4.0-test9 which adds sim700.{c,h,scr}. That driver
is supposed to handle 53c700 and 53c710 and be a replacement for

> the NCR 53c700/66 is mapped at 0xCC0-0xCFF.

Good! You are well-organized. I also had that someplace.

> system board id ... mac address

I am not quite sure what you mean by System Board Id.
The EISA ID of this thing is INT3061.


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:52    [W:0.031 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site