lkml.org 
[lkml]   [2001]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectPATCH 2.4.4.ac8: Tulip net driver fixes
Attached is a patch against 2.4.4-ac8 which includes several fixes to
the Tulip driver. This should fix the reported PNIC problems, as well
as problems with forcing media on MII phys and several other bugs.

After a bit more testing this will go to Alan, and get posted on the
Tulip driver web page (http://sourceforge.net/projects/tulip/), and go
to Linus when he returns. (Actually, Alan already has part of this
patch)

--
Jeff Garzik | Game called on account of naked chick
Building 1024 |
MandrakeSoft |diff -ur /spare/tmp/linux_2_4/drivers/net/tulip/ChangeLog linux_2_4/drivers/net/tulip/ChangeLog
--- /spare/tmp/linux_2_4/drivers/net/tulip/ChangeLog Sat May 12 10:47:08 2001
+++ linux_2_4/drivers/net/tulip/ChangeLog Sat May 12 15:18:47 2001
@@ -1,3 +1,49 @@
+2001-05-12 Jeff Garzik <jgarzik@mandrakesoft.com>
+
+ * tulip_core (tulip_init_one): Do not call
+ unregister_netdev in error cleanup. Remnant of old
+ usage of init_etherdev.
+
+2001-05-12 Jeff Garzik <jgarzik@mandrakesoft.com>
+
+ * media.c (tulip_find_mii): Simple write the updated BMCR
+ twice, as it seems the best thing to do for both broken and
+ sane chips.
+ If the mii_advert value, as read from MII_ADVERTISE, is zero,
+ then generate a value we should advertise from the capability
+ bits in BMSR.
+ Fill in tp->advertising for all cases.
+ Just to be safe, clear all unwanted bits.
+
+2001-05-12 Jeff Garzik <jgarzik@mandrakesoft.com>
+
+ * tulip_core.c (private_ioctl): Fill in tp->advertising
+ when advertising value is changed by the user.
+
+2001-05-12 Jeff Garzik <jgarzik@mandrakesoft.com>
+
+ * tulip_core.c: Mark Comet chips as needed the updated MWI
+ csr0 configuration.
+
+2001-05-12 Jeff Garzik <jgarzik@mandrakesoft.com>
+
+ * media.c, tulip_core.c: Move MII scan into
+ from inlined inside tulip_init_one to new function
+ tulip_find_mii in media.c.
+
+2001-05-12 Jeff Garzik <jgarzik@mandrakesoft.com>
+
+ * media.c (tulip_check_duplex):
+ Only restart Rx/Tx engines if they are active
+ (and csr6 changes)
+
+2001-05-12 Jeff Garzik <jgarzik@mandrakesoft.com>
+
+ * tulip_core.c (tulip_mwi_config):
+ Clamp values read from PCI cache line size register to
+ values acceptable to tulip chip. Done for safety and
+ -almost- certainly unneeded.
+
2001-05-11 Jeff Garzik <jgarzik@mandrakesoft.com>

* tulip_core.c (tulip_init_one):
@@ -93,15 +139,15 @@

2001-05-09 Jeff Garzik <jgarzik@mandrakesoft.com>

- * 21142.c (t21142_lnk_change): Pass arg startup==1
- to tulip_select_media, in order to force csr13 to be
- zeroed out prior to going to full duplex mode. Fixes
- autonegotiation on a quad-port Znyx card.
- (from Stephen Dengler)
+ * 21142.c (t21142_lnk_change): Pass arg startup==1
+ to tulip_select_media, in order to force csr13 to be
+ zeroed out prior to going to full duplex mode. Fixes
+ autonegotiation on a quad-port Znyx card.
+ (from Stephen Dengler)

2001-05-09 Russell King <rmk@arm.linux.org.uk>

- * interrupt.c: Better PCI bus error reporting.
+ * interrupt.c: Better PCI bus error reporting.

2001-04-03 Jeff Garzik <jgarzik@mandrakesoft.com>

@@ -134,7 +180,7 @@
the following defines existed. These defines were never used
by normal users in practice: TULIP_FULL_DUPLEX,
TULIP_DEFAULT_MEDIA, and TULIP_NO_MEDIA_SWITCH.
-
+
* tulip.h, eeprom.c: Move EE_* constants from tulip.h to eeprom.c.
* tulip.h, media.c: Move MDIO_* constants from tulip.h to media.c.

diff -ur /spare/tmp/linux_2_4/drivers/net/tulip/media.c linux_2_4/drivers/net/tulip/media.c
--- /spare/tmp/linux_2_4/drivers/net/tulip/media.c Sat May 12 10:47:08 2001
+++ linux_2_4/drivers/net/tulip/media.c Sat May 12 13:08:31 2001
@@ -16,6 +16,8 @@

#include <linux/kernel.h>
#include <linux/mii.h>
+#include <linux/init.h>
+#include <linux/delay.h>
#include "tulip.h"


@@ -409,6 +411,7 @@
*/
int tulip_check_duplex(struct net_device *dev)
{
+ long ioaddr = dev->base_addr;
struct tulip_private *tp = dev->priv;
unsigned int bmsr, lpa, negotiated, new_csr6;

@@ -439,7 +442,10 @@
else new_csr6 &= ~FullDuplex;

if (new_csr6 != tp->csr6) {
- tulip_restart_rxtx(tp, new_csr6);
+ if (inl(ioaddr + CSR6) & (csr6_st | csr6_sr))
+ tulip_restart_rxtx(tp, new_csr6);
+ else
+ outl(new_csr6, ioaddr + CSR6);
tp->csr6 = new_csr6;

if (tulip_debug > 0)
@@ -451,4 +457,111 @@
}

return 0;
+}
+
+void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
+{
+ struct tulip_private *tp = dev->priv;
+ int phyn, phy_idx = 0;
+ int mii_reg0;
+ int mii_advert;
+ unsigned int to_advert, new_bmcr, ane_switch;
+
+ /* Find the connected MII xcvrs.
+ Doing this in open() would allow detecting external xcvrs later,
+ but takes much time. */
+ for (phyn = 1; phyn <= 32 && phy_idx < sizeof (tp->phys); phyn++) {
+ int phy = phyn & 0x1f;
+ int mii_status = tulip_mdio_read (dev, phy, MII_BMSR);
+ if ((mii_status & 0x8301) == 0x8001 ||
+ ((mii_status & BMSR_100BASE4) == 0
+ && (mii_status & 0x7800) != 0)) {
+ /* preserve Becker logic, gain indentation level */
+ } else {
+ continue;
+ }
+
+ mii_reg0 = tulip_mdio_read (dev, phy, MII_BMCR);
+ mii_advert = tulip_mdio_read (dev, phy, MII_ADVERTISE);
+ ane_switch = 0;
+
+ /* if not advertising at all, gen an
+ * advertising value from the capability
+ * bits in BMSR
+ */
+ if ((mii_advert & ADVERTISE_ALL) == 0) {
+ unsigned int tmpadv = tulip_mdio_read (dev, phy, MII_BMSR);
+ mii_advert = ((tmpadv >> 6) & 0x3e0) | 1;
+ }
+
+ if (tp->mii_advertise) {
+ tp->advertising[phy_idx] =
+ to_advert = tp->mii_advertise;
+ } else if (tp->advertising[phy_idx]) {
+ to_advert = tp->advertising[phy_idx];
+ } else {
+ tp->advertising[phy_idx] =
+ tp->mii_advertise =
+ to_advert = mii_advert;
+ }
+
+ tp->phys[phy_idx++] = phy;
+
+ printk (KERN_INFO "tulip%d: MII transceiver #%d "
+ "config %4.4x status %4.4x advertising %4.4x.\n",
+ board_idx, phy, mii_reg0, mii_status, mii_advert);
+
+ /* Fixup for DLink with miswired PHY. */
+ if (mii_advert != to_advert) {
+ printk (KERN_DEBUG "tulip%d: Advertising %4.4x on PHY %d,"
+ " previously advertising %4.4x.\n",
+ board_idx, to_advert, phy, mii_advert);
+ tulip_mdio_write (dev, phy, 4, to_advert);
+ }
+
+ /* Enable autonegotiation: some boards default to off. */
+ if (tp->default_port == 0) {
+ new_bmcr = mii_reg0 | BMCR_ANENABLE;
+ if (new_bmcr != mii_reg0) {
+ new_bmcr |= BMCR_ANRESTART;
+ ane_switch = 1;
+ }
+ }
+ /* ...or disable nway, if forcing media */
+ else {
+ new_bmcr = mii_reg0 & ~BMCR_ANENABLE;
+ if (new_bmcr != mii_reg0)
+ ane_switch = 1;
+ }
+
+ /* clear out bits we never want at this point */
+ new_bmcr &= ~(BMCR_CTST | BMCR_FULLDPLX | BMCR_ISOLATE |
+ BMCR_PDOWN | BMCR_SPEED100 | BMCR_LOOPBACK |
+ BMCR_RESET);
+
+ if (tp->full_duplex)
+ new_bmcr |= BMCR_FULLDPLX;
+ if (tulip_media_cap[tp->default_port] & MediaIs100)
+ new_bmcr |= BMCR_SPEED100;
+
+ if (new_bmcr != mii_reg0) {
+ /* some phys need the ANE switch to
+ * happen before forced media settings
+ * will "take." However, we write the
+ * same value twice in order not to
+ * confuse the sane phys.
+ */
+ if (ane_switch) {
+ tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr);
+ udelay (10);
+ }
+ tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr);
+ }
+ }
+ tp->mii_cnt = phy_idx;
+ if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) {
+ printk (KERN_INFO "tulip%d: ***WARNING***: No MII transceiver found!\n",
+ board_idx);
+ tp->phys[0] = 1;
+ }
}
diff -ur /spare/tmp/linux_2_4/drivers/net/tulip/tulip.h linux_2_4/drivers/net/tulip/tulip.h
--- /spare/tmp/linux_2_4/drivers/net/tulip/tulip.h Sat May 12 10:47:08 2001
+++ linux_2_4/drivers/net/tulip/tulip.h Sat May 12 13:07:51 2001
@@ -404,6 +404,7 @@
void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int value);
void tulip_select_media(struct net_device *dev, int startup);
int tulip_check_duplex(struct net_device *dev);
+void tulip_find_mii (struct net_device *dev, int board_idx);

/* pnic.c */
void pnic_do_nway(struct net_device *dev);
diff -ur /spare/tmp/linux_2_4/drivers/net/tulip/tulip_core.c linux_2_4/drivers/net/tulip/tulip_core.c
--- /spare/tmp/linux_2_4/drivers/net/tulip/tulip_core.c Sat May 12 10:47:08 2001
+++ linux_2_4/drivers/net/tulip/tulip_core.c Sat May 12 13:07:47 2001
@@ -24,7 +24,7 @@
#include <asm/unaligned.h>

static char version[] __devinitdata =
- "Linux Tulip driver version 0.9.14g (May 11, 2001)\n";
+ "Linux Tulip driver version 0.9.14h (May 12, 2001)\n";


/* A few user-configurable values. */
@@ -162,7 +162,7 @@

/* COMET */
{ "ADMtek Comet", 256, 0x0001abef,
- MC_HASH_ONLY | COMET_MAC_ADDR, comet_timer },
+ MC_HASH_ONLY | COMET_MAC_ADDR | HAS_PCI_MWI, comet_timer },

/* COMPEX9881 */
{ "Compex 9881 PMAC", 128, 0x0001ebef,
@@ -824,7 +824,8 @@
struct tulip_private *tp = dev->priv;
long ioaddr = dev->base_addr;
u16 *data = (u16 *) & rq->ifr_data;
- int phy = tp->phys[0] & 0x1f;
+ const unsigned int phy_idx = 0;
+ int phy = tp->phys[phy_idx] & 0x1f;
unsigned int regnum = data[1];

switch (cmd) {
@@ -886,7 +887,10 @@
if (tp->full_duplex_lock)
tp->full_duplex = (value & 0x0100) ? 1 : 0;
break;
- case 4: tp->mii_advertise = data[2]; break;
+ case 4:
+ tp->advertising[phy_idx] =
+ tp->mii_advertise = data[2];
+ break;
}
}
if (data[0] == 32 && (tp->flags & HAS_NWAY)) {
@@ -1167,6 +1171,19 @@
if (!pci_cacheline || (tp->chip_id == DC21143 && tp->revision == 65))
mwi = 0;

+ /* re-clamp cache line values to ones supported by tulip */
+ /* From this point forward, 'pci_cacheline' is really
+ * the value used for csr0 cache alignment and
+ * csr0 programmable burst length
+ */
+ switch (pci_cacheline) {
+ case 0:
+ case 8:
+ case 16:
+ case 32: break;
+ default: pci_cacheline = TULIP_MIN_CACHE_LINE; break;
+ }
+
/* set or disable MWI in the standard PCI command bit.
* Check for the case where mwi is desired but not available
*/
@@ -1497,7 +1514,6 @@
if ((tp->flags & ALWAYS_CHECK_MII) ||
(tp->mtable && tp->mtable->has_mii) ||
( ! tp->mtable && (tp->flags & HAS_MII))) {
- int phyn, phy_idx = 0;
if (tp->mtable && tp->mtable->has_mii) {
for (i = 0; i < tp->mtable->leafcount; i++)
if (tp->mtable->mleaf[i].media == 11) {
@@ -1508,69 +1524,11 @@
break;
}
}
- /* Find the connected MII xcvrs.
- Doing this in open() would allow detecting external xcvrs later,
- but takes much time. */
- for (phyn = 1; phyn <= 32 && phy_idx < sizeof(tp->phys); phyn++) {
- int phy = phyn & 0x1f;
- int mii_status = tulip_mdio_read(dev, phy, 1);
- if ((mii_status & 0x8301) == 0x8001 ||
- ((mii_status & 0x8000) == 0 && (mii_status & 0x7800) != 0)) {
- int mii_reg0 = tulip_mdio_read(dev, phy, 0);
- int mii_advert = tulip_mdio_read(dev, phy, 4);
- unsigned int to_advert, new_bmcr;
-
- if (tp->mii_advertise)
- to_advert = tp->mii_advertise;
- else if (tp->advertising[phy_idx])
- to_advert = tp->advertising[phy_idx];
- else
- tp->mii_advertise = to_advert = mii_advert;

- tp->phys[phy_idx++] = phy;
-
- printk(KERN_INFO "tulip%d: MII transceiver #%d "
- "config %4.4x status %4.4x advertising %4.4x.\n",
- board_idx, phy, mii_reg0, mii_status, mii_advert);
- /* Fixup for DLink with miswired PHY. */
- if (mii_advert != to_advert) {
- printk(KERN_DEBUG "tulip%d: Advertising %4.4x on PHY %d,"
- " previously advertising %4.4x.\n",
- board_idx, to_advert, phy, mii_advert);
- tulip_mdio_write(dev, phy, 4, to_advert);
- }
-
- /* Enable autonegotiation: some boards default to off. */
- if (tp->default_port == 0) {
- new_bmcr = mii_reg0 | BMCR_ANENABLE;
- if (new_bmcr != mii_reg0)
- new_bmcr |= BMCR_ANRESTART;
- }
- /* ...or disable nway, if forcing media */
- else
- new_bmcr = mii_reg0 & ~BMCR_ANENABLE;
-
- if (new_bmcr != mii_reg0)
- tulip_mdio_write(dev, phy, MII_BMCR, new_bmcr);
-
- if (tp->full_duplex) new_bmcr |= BMCR_FULLDPLX;
- else new_bmcr &= ~BMCR_FULLDPLX;
- if (tulip_media_cap[tp->default_port] & MediaIs100)
- new_bmcr |= BMCR_SPEED100;
- else new_bmcr &= ~BMCR_SPEED100;
-
- if (new_bmcr != mii_reg0) {
- udelay(10);
- tulip_mdio_write(dev, phy, MII_BMCR, new_bmcr);
- }
- }
- }
- tp->mii_cnt = phy_idx;
- if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) {
- printk(KERN_INFO "tulip%d: ***WARNING***: No MII transceiver found!\n",
- board_idx);
- tp->phys[0] = 1;
- }
+ /* Find the connected MII xcvrs.
+ Doing this in open() would allow detecting external xcvrs
+ later, but takes much time. */
+ tulip_find_mii (dev, board_idx);
}

/* The Tulip-specific entries in the device structure. */
@@ -1676,7 +1634,6 @@
err_out_free_res:
pci_release_regions (pdev);
err_out_free_netdev:
- unregister_netdev (dev);
kfree (dev);
return -ENODEV;
}
\
 
 \ /
  Last update: 2005-03-22 12:52    [W:0.120 / U:25.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site