[lkml]   [2001]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Problem with dmfe
> server (600MHz Celeron), and strange effects occurred with the Davicom DM9102
> network card. It was active but apparently VERY slow, 85% packet loss in ping.
> I could connect to the machine but could not do anything useful. The system had
> to be rebooted into the previous configuration (2.2.12) which works fine.

It could be an IRQ routing problem. It could be a dmfe driver problem. Does
using the tulip driver in 2.4.x with it make it any happier ?

> Thus, device 00:01.0 (video card) shares IRQ with the net card. Could it be
> the source of the problem? Under 2.2.12, pciutils show the following info
> for these devices:

PCI irq sharing is part of the spec.

> Thus, it says IRQ for the VGA card is 0, not 3 (also strange).

[VGA one is disabled I think]

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:52    [W:0.022 / U:1.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site