[lkml]   [2001]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subjecteepro100/usb interrupts stop with 2.4.x kernels?
Since about 2.4.2, I have been seeing intermittent hangs on my system;
usually once or twice a week, but once just 10 minutes after rebooting.

What seems to happen is that the kernel stops seeing interrupts on the
IRQ shared by eth0 (my outside interface) and usb-uhci. I can still
ssh in on eth1, and when I do, syslog contains things like "eth0:
Interrupt timed out" and usb-uhci griping about devices that failed to
accept new endpoints.

I'm not sure if for some reason my chipset stopped passing these
interrupts on to the kernel, or if the kernel got into some funny
state and stopped accepting those interrupts. Any hints on where I
should look?

From /proc/interrupts now:
0: 243741 233914 IO-APIC-edge timer
1: 4 0 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 0 0 IO-APIC-edge rtc
10: 0 0 IO-APIC-level EMU10K1
11: 18775 17937 IO-APIC-level usb-uhci, eth0
12: 1221 1236 IO-APIC-level eth1
14: 84039 68162 IO-APIC-edge ide0
15: 18 18 IO-APIC-level BusLogic BT-950
NMI: 0 0
LOC: 477548 477547
ERR: 0

-- Michael
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:52    [W:0.104 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site