Messages in this thread |  | | Date | Mon, 09 Apr 2001 14:07:53 +0100 | | From | Joao Paulo Martins <> | | Subject | i2o & Promise SuperTrak100 |
| |
Hi,
I purchase a Promise SuperTrak100 RAID controler and installed on a PIII dual with latest kernel 2.4.3. It didn't work, so I searched the linux-kernel achives and found an exact discription of my problem by David Priban on Feb. 27 2001 (http://www.uwsg.iu.edu/hypermail/linux/kernel/0102.3/0037.html). Andrew Morton and Alan Cox gave an hand. I follow hte hists and advance a bit, and as David, now I get a bunch of I/O errors on mounted array. After this there was a sugestion of timing problems, but the issue ended with no solution.
Could any one help me, please! Let me thank you in advance for any help.
I have no problem starting the i2o_block modules, I can run a create a partition, but when I try to make a file system I get a lot of I/O erros:
> modprobe i2o_block > fdisk /dev/i2o/hd/disc0/disc > mkreiserfs /dev/i2o/hd/disc0/part1
syslog:
Linux I2O PCI support (c) 1999 Red Hat Software. I2O Core - (C) Copyright 1999 Red Hat Software i2o: Checking for PCI I2O controllers... i2o: I2O controller on bus 1 at 25. i2o: PCI I2O controller at 0xFE000000 size=4194304 i2o/iop0: Installed at IRQ22 i2o: 1 I2O controller found and installed. I2O: Event thread created as pid 1029 Activating I2O controllers... This may take a few minutes if there are many devices i2o/iop0: Reset rejected, trying to clear i2o/iop0: LCT has 10 entries. i2o/iop0: Configuration dialog desired. Target ID 0. Device: IxWorks Rev: 0201 Class: Executive Subclass: 0x0001 Flags: PM Target ID 8. Vendor: PROMISE TECH. Device: I2O RAID ISM Rev: V1.0.0 Class: Device Driver Module Subclass: 0x0021 Flags: PM Target ID 9. Vendor: PROMISE TECH. Device: I2O IDE HDM Rev: 0.02 Class: Device Driver Module Subclass: 0x0020 Flags: PM Target ID 10. Vendor: VENDOR-UNKNOWN Device: IBM-DTLA-307060 Rev: TX8OA50C Class: Block Device Subclass: 0x0000 Flags: CPM Target ID 12. Vendor: VENDOR-UNKNOWN Device: IBM-DTLA-307060 Rev: TX8OA50C Class: Block Device Subclass: 0x0000 Flags: CPM Target ID 13. Vendor: VENDOR-UNKNOWN Device: IBM-DTLA-307060 Rev: TX8OA50C Class: Block Device Subclass: 0x0000 Flags: CPM Target ID 14. Vendor: VENDOR-UNKNOWN Device: IBM-DTLA-307060 Rev: TX8OA50C Class: Block Device Subclass: 0x0000 Flags: CPM Target ID 15. Vendor: VENDOR-UNKNOWN Device: IBM-DTLA-307060 Rev: TX8OA50C Class: Block Device Subclass: 0x0000 Flags: CPM Target ID 16. Vendor: VENDOR-UNKNOWN Device: IBM-DTLA-307060 Rev: TX8OA50C Class: Block Device Subclass: 0x0000 Flags: CPM Target ID 17. Vendor: PROMISE TECH. Device: I2O RAID DEVICE Rev: V1.0.0 Class: Block Device Subclass: 0x0000 Flags: PM i2o/iop0: No handler for event (0x02000000) I2O Block Storage OSM v0.9 (c) Copyright 1999, 2000 Red Hat Software. i2o_block: registered device at major 80 i2ob: Installing tid 17 device at unit 0 Max Segments set to 12 Byte limit is 6144. i2o/hda: Type 1- 293220Mb, 512 byte sectors. i2o/hda: Maximum sectors/read set to 255. i2o/hda: p1 devfs: devfs_register(disc): NULL ops, got d0c18ef0 from major table /dev/i2o/hda error: Device is not ready end_request: I/O error, dev 50:00 (i2o block), sector 22600 /dev/i2o/hda error: Device is not ready end_request: I/O error, dev 50:00 (i2o block), sector 22600
(errors repeat many times)
-- ------------------------------------------------------------------ Joao Martins martinsj@lip.pt Av. Elias Garcia, 14-1 Tel: +351 21 797 3880 1000-149 Lisboa Portugal Fax: +351 21 793 4631 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |