Messages in this thread | | | From | lists@sapience ... | Date | Sat, 7 Apr 2001 17:55:05 -0400 | Subject | aic7xxx 6.1.10 and 2.4.4-pre1 |
| |
I had tried 6.1.8 + 2.4.3 and had problems which included messages like 'aic7xxx_abort returns 8194' and machine froze up shortly after X started. This on redhat 7.0. Sorry but since I was unable to even boot back the prev kernel (2.4.0) I cant provide any more detailed information. I have been following to see a few other folks have had some issues with scsi as well.
I have 2 lvd scsi disks and one ide, AH 2940U2 - top of lilo included below - and bios boot order is scsi first.
So I started again - installed redhat 7.0.9. took 2.4.4-pre1 and patched it with linux-aic7xxx-6.1.10-2.4.3.patch
Patch applied cleanly but when I compile it complains a little:
In file included from aic7xxx_linux.c:131: aic7xxx_osm.h: In function `ahc_pci_read_config': aic7xxx_osm.h:862: warning: control reaches end of non-void function
(for several .c files but always refers to 'ahc_pci_read_config')
In file included from ... include/linux/raid/md.h:50, from init/main.c:24: ..include/linux/raid/md_k.h: In function `pers_to_level': raid/md_k.h:39: warning: control reaches end of non-void function
Do I need to be concerned here? I dont whether the presumed missing return is a bad thing or not.
I have not yet tried to boot this kernel.
Also
# lilo.conf boot=/dev/sda disk=/dev/sda bios=0x80 disk=/dev/sdb bios=0x81 disk=/dev/hda bios=0x82 map=/boot/map install=/boot/boot.b prompt timeout=50 message=/boot/message lba32 default=linux
...
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |